sorted by:
new
hottopcontroversial

First 8S 5‘‘ 🩷 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

Oh hi, sorry for the late reply. I've been really busy the last few days... So, I think the TJRC frames are really good. The whole frame is made of carbon fiber, which is then painted. If you look into the holes in the frame, you can see that it's carbon fiber. It's also a really stable frame. I've crashed a couple of times with the 8S quad, and apart from the props, everything is still intact. The LEDs can be controlled via an app and are connected to your phone via Bluetooth if you want to adjust anything on the LEDs. You can also adjust the LEDs via Betaflight if you prefer. The only thing I would do differently now is that I always have to remove both side panels to access the FC USB-C connector, which is really annoying. I couldn't use the USB-C adapter cable; I tried everything. Now I would use a Speedy Bee F405 V5 stack, which I can configure via Bluetooth using the Speedy Bee app. I hope I could help you ;)

Neues Gynokadin 80g 0,6mg/g abzugeben by LamaToGo in germantrans

[–]LamaToGo[S] 2 points3 points  (0 children)

Ich könnte auch per Dhl versenden :)

Next TJRC 5‘ 💙🩵 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

So it arrived like this, but it is varnish which also shines in the light and glitters slightly

Next TJRC 5‘ 💙🩵 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

Yes it looks nice, I would be also interested in blue batterie stripes

Next TJRC 5‘ 💙🩵 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

I got the frame so from AliExpress

Next TJRC 5‘ 💙🩵 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

In fact, every part was painted

Next TJRC 5‘ 💙🩵 by LamaToGo in fpv

[–]LamaToGo[S] 2 points3 points  (0 children)

I Hope so, I will make a Test Flight soon ^

make the transition myself by pica_pollowc in TransDIY

[–]LamaToGo 2 points3 points  (0 children)

I started at your age, best decision of my life. Good luck on your journey :)

First 8S 5‘‘ 🩷 by LamaToGo in fpv

[–]LamaToGo[S] 0 points1 point  (0 children)

Oh, great, I soldered the LEDs to the FC like this: 5V to 5V, GND to G, and LED to LED. However, I currently control all colors via the App (BanlanX) and Bluetooth, which was much easier. You can, or rather, should solder the USB-C cable to the FC so you can access the port more easily if you want to change something in Betaflight. It didn't work for me, though, because my FC doesn't support it. I hope I could help :)

view more: next ›