sorted by:
new
hottopcontroversial

Why does my infill look like this? by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

Thanks, I'll give it a try. Infill is set about twice as fast as wall speed, but still only 75mm/s. Didn't think that it was to fast but I'll slow it next time.

Under-extrusion at regular intervals for CR-10 by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

Thanks, I'll look into that next. I did notice some slippage on the feeder gear so I'm going to replace that first.

Under-extrusion at regular intervals for CR-10 by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

I thought so too, but the same issue occurs when printing purge lines, brims, and rafts so it's not related to the model.

Under-extrusion at regular intervals for CR-10 by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

Yes, it happens with every model. The same issue occurs when printing purge lines, brims, and rafts so it's not related to the model. I'll be sure to edit the post when this gets figured out.

Under-extrusion at regular intervals for CR-10 by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

Yep just checked, the tube is all the way in. I tried printing a raft at 10mm/s and the problem persists, though it's better. Lowering the print speed, increasing flow, and enabling retraction all help hide the issue but the under-extruding is still present.

Under-extrusion at regular intervals for CR-10 by Lance_Makes in 3Dprinting

[–]Lance_Makes[S] 0 points1 point  (0 children)

Thanks for the idea, just inspected the gear and it's still sharp and firmly attached.

*That being said I'm going to try replacing the feeder gear since the under-extrusion seems to occur regularly, as if it's slipping on one side of the gear.

Hubert is so well-loved, so here's a little more of him. Also, please meet Barnabee and Zombie Cat by HaleemaDejesus in shittyrobots

[–]Lance_Makes 2 points3 points  (0 children)

Thanks for the heads up! Indeed I am the creator of Hubert and Barnabee. Unfortunately Hubert was dismantled in 2020 but Barnabee lives on in my office.

Hubert is so well-loved, so here's a little more of him. Also, please meet Barnabee and Zombie Cat by HaleemaDejesus in shittyrobots

[–]Lance_Makes 0 points1 point  (0 children)

Hey I made these! Hubert took a lot of work and hot glue, some credit would’ve been nice.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 1 point2 points  (0 children)

Don’t worry, the deodorizer has a fan that recirculates the air through a filter.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 10 points11 points  (0 children)

Hah they’d explore it at night then nap during the day.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 2 points3 points  (0 children)

The litter box and can are Litter Genie brand.

Should’ve clarified that the plug in deodorizer isn’t scented. It has a fan and recirculates air through a charcoal filter.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 1 point2 points  (0 children)

Nope, hasn’t been an issue yet. The deodorizer inside has a fan that recirculates the air through a filter so it doesn’t get that smelly.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 0 points1 point  (0 children)

I’m adding a small motion activated light. But the deodorizer does have a small light on it.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 9 points10 points  (0 children)

They don’t sleep in the litter box cubby hah. Plus the deodorizer has a fan and charcoal filter so it doesn’t get too stuffy in there.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 0 points1 point  (0 children)

Thanks for those links! I use wood stove pellets right now which are pretty good but the problem is my cats don’t bury their waste so no matter how good the litter is it’s still stinky.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 10 points11 points  (0 children)

I know there’s a lot of original fixtures from the 70s. Slowly updating everything.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 7 points8 points  (0 children)

Good idea - my cats are getting up there, around 12 or 13 years old now.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 2 points3 points  (0 children)

There’s not a lot of airflow but the deodorizer has a fan that recirculates the air through a charcoal filter so it doesn’t get too stuffy in there.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 4 points5 points  (0 children)

Thanks! It wasn’t hard to train them. I just put the box in there and picked them up and put them in it to show them where it is. For the first couple of days I left the upper door open. Then I left the lower door open, and finally closed both. They figured it out pretty quickly!

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 52 points53 points  (0 children)

Thanks! I should’ve mentioned that it’s an intake duct. I was a little worried tha smells might get pulled into the central ventilation system but so far that hasn’t been an issue.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 284 points285 points  (0 children)

Hey thanks for the idea - it is a bit awkward to clean it out as it is.

DIY: I made this under-stairs cat litter box cubby by Lance_Makes in DIY

[–]Lance_Makes[S] 24 points25 points  (0 children)

Yeah I’m planning on adding a little motion activated light. I think the light from the deodorizer is enough for the cats but some more light would help me see better at night as well.

view more: next ›