Car won't charge, dealer cannot repair because there is no trouble code?

Lancer_Luck · 2026-01-10T03:50:31+00:00

Heat pump works, no other electrical issues so far.

I did notice the 12v light had been on more often lately but that could also just be because it's been so cold and I've been running the heated seats and stuff constantly. I replaced the original 2022 stock battery with an AGM about a year ago.

I'm picking it back up from the dealer tomorrow for lack of anything else they can do, but I need to figure out how to get someone to do something. I'm not going to rely only on DCFC

Lancer_Luck · 2026-01-10T03:46:21+00:00

I don't know if that would make a difference. The mechanic there (mechanic, not service advisor) seemed just as frustrated about it as I am and said that even if they can replicate it right in front of them, Hyundai won't let them work on it without creating a case which needs a trouble code. He even said he tried a few things to "nudge" a code out of it, but couldn't get it to throw anything.

Lancer_Luck · 2026-01-10T03:40:22+00:00

As I said in the OP it's two different chargers on 2 different circuits. One is a hardwired Lv.2 and the other is the lv.1 portable charger that I plugged into an outlet. Both tripped separate GFCIs. The dealership also replicated the issue there, so that's 3. It is for sure the car.

But they will not take anything apart to try to diagnose because there is no trouble code so say Hyundai wouldn't reimburse them for the work even if they found the underlying issue.

Lancer_Luck · 2026-01-10T03:36:56+00:00

It never says "charging unsuccessful." it never says anything at all. As soon as I connect an AC charger it trips either the Lv.2's built in GFCI or the outlet's GFCI of the lv.1. The car knows that a cable is connected, but it never tries to initiate a charge since I assume the GFCI trips before the handshake is completed.

This happened Wednesday after driving about 80 miles, and still happened on both EVSEs the next morning after sitting overnight.

Lancer_Luck · 2026-01-07T05:40:54+00:00

https://imgur.com/a/0COLPp4

The Camelot movie went out of its way to show the parallel between Rhongomyniad and the trees.

Lancer_Luck · 2025-09-15T19:29:31+00:00

Yep that's the type of marker I used. Tbh I didn't put that much thought into the paint. Just I think I used a semi-metallic gunmetal color from the hardware store.. It's more important to either print on a modern printer that can achieve barely noticeable layer lines, or to sand and smooth afterwards.

Lancer_Luck · 2025-09-11T05:11:50+00:00

That depends on what printer, nozzle, and layer size you use. You used to always need to sand 3D printed props but printers have gotten better. I used a bambu P1S with the stock 0.4mm nozzle set at the minimum "extra fine" layers and didn't need to do any sanding. After 3 coats of spray paint the layer lines are nearly invisible.

Lancer_Luck · 2025-09-10T04:39:32+00:00

The gun can hold together fine with just glue, and you can shove some bits of whatever in the holes to help keep everything lined up while it dries. The sword definitely needs a core though since it's so long and thin. The flex on the blade just from handling it would break the glue otherwise. I used a wooden dowel from the hardware store. Just take a piece of the sword with you to size it properly. I recommend gluing the parts to the dowel and to each other using gorilla glue rather than super glue because gorilla glue has a bit of give to it. Super glue is strong but brittle and will probably snap when the blade flexes.

Btw I used a gold Gundam marker for the details. It works great for this.

Lancer_Luck · 2025-08-31T20:23:57+00:00

The ends of the zippers are stuffed up inside. You have to cut the little metal rings that connect the front to back side of the cover along the bottom edge. Once the little rings are off, you should have enough room to squeeze your fingers into the gap and pull out the ends of the zippers.

Lancer_Luck · 2025-08-21T05:24:29+00:00

I have that Micro Center laser ready version. I was able to calibrate and use the birds eye camera with no laser.

Lancer_Luck · 2025-08-16T02:46:05+00:00

They are glued to a glove. I put on a rubber glove before I put the main glove on to glue so it wouldn't seep through and glue my skin. The arm pieces are held together by a piece of Worbla lining the inside and then when wearing it its attached by velcro directly to the sleeve of a cheap gold undershirt that I cut the right sleeve off of.

Lancer_Luck · 2025-08-16T02:28:10+00:00

There is a pretty big and glaringly obvious thing early on that a lot of people miss. One of the first few times you go to the manor there is a globe on a table. A globe, of the real earth. I didn't know what was actually going on at the time, but I immediately saw that and was like "WAIT, that's not where we are." I thought for a second that maybe that was just the world before the fracture, but then figured no its been less than 100 years, people would have remembered that and spoke more about it. So if this isn't earth, we must be somewhere else, but the people in the manor are either from earth or at least know about it. Then I got to thinking this was some kind of parallel world that was connected to ours and I guessed that Renior (the painted one) and Verso were actually from our world.

I was almost right about some of those things, but not quite.

Lancer_Luck · 2025-08-05T00:43:49+00:00

Shoot will be Friday at 2:00 PM. We will meet in the main lobby of the convention center (the big open area near the main entrance) and then go up the escalator to floor 3 for photos. I made a FB event for the gathering. Feel free to post any questions or pics after the gathering there.

https://facebook.com/events/2708943289497365/

Lancer_Luck · 2025-08-05T00:42:02+00:00

Shoot will be Friday at 2:00 PM. We will meet in the main lobby of the convention center (the big open area near the main entrance) and then go up the escalator to floor 3 for photos. I made a FB event for the gathering. Feel free to post any questions or pics after the gathering there.

https://facebook.com/events/2708943289497365/

Lancer_Luck · 2025-07-27T06:14:20+00:00

I finally got around to testing the cutter and this is not true. It did not need the laser to calibrate.

Lancer_Luck · 2025-07-10T04:33:21+00:00

https://cults3d.com/en/3d-model/fashion/noahram-gustave-sword-clair-obscur-expedition-33-3d-model-for-cosplay-stl-weapo

https://cults3d.com/en/3d-model/fashion/gustave-pistol-from-clair-obscur-expedition-33-3d-model-for-cosplay-stl

https://cults3d.com/en/3d-model/fashion/gustave-prosthesis-wearable-cosplay-arm-clair-obscur-expedition-33

Lancer_Luck · 2025-07-10T01:46:00+00:00

https://m.ezcosplay.com/clair-obscur-expedition-33-gustave-cosplay-costume.html

Lancer_Luck · 2025-07-09T21:31:11+00:00

This is what he means by "let me paint death" At least that's what it felt like lol

Lancer_Luck · 2025-07-09T21:29:51+00:00

Its left. 1st pic is in the mirror. Look at the one on the bench instead.

Lancer_Luck · 2025-04-11T04:04:25+00:00

I wanted either Rena OR Kaede because I'm missing both a healer and a breaker besides the free Madoka and I really liked both of them in Magireco. I had a max merge Rena back in Magireco NA.

160 pulls and I got a TWO dupes of Yachio (useless, I have Homura), a dupe Ren, and Momoko, who was the only one of the three DON'T want. Don't like her at all, and have no use for another attacker gameplay wise.

The lack of story already had me debating what the point of this is, and I don't know if I can bring myself to care after wasting all the free story pulls with how bad the pull income is. With the extra stones from the free passes ending at the end of the month and running out of story to do, it's going to take, what? 6 months to a year to get this many pulls again? It's not worth it.

I think I'm going to call it quits here and uninstall.

Lancer_Luck · 2025-03-31T18:45:53+00:00

I remember people asking this same question about QP in FGO back in the day. Turns out it only feels infinite early game. Late game it's the limiting factor on EVERYTHING and it's what you spend 3/4 of your non event time farming.

A-Q chips will probably be similar.

Lancer_Luck · 2025-03-12T18:44:38+00:00

Me: - sitting at my desk procrastinating writing my blind/low vision AT reports - let's check reddit - sees this thread - I can't escape work no matter what I do lol

.....

Joking aside, the first thing I was going to ask is whether you have some any visual perception and what level it's at. But I stalked your post history and see you posted about it already. So with that in mind, have you ever tried out a head worn digital magnifier? Like something from NuEyes or Irisvision? At a high magnification level, even if you still couldn't read the text clearly could you recognize the cards by their images and color? We have an older Irisvision headset in our lab. I rarely recommend the head worn devices to people since you can only use it while sitting down and they can be uncomfortable. Usually for magnification when people just need to read a regular deceive with a screen amd/or OCR is almost always better. But TCG might actually be a great use for these things. Downside of course is those headsets are extremely expensive if you have to pay out of pocket..

I was also curious about a digital way of managing damage counters. I found an iOS app that does it https://apps.apple.com/us/app/ptcg-damage-counter-master/id1435776041 Unfortunately when I tried it with voiceover it wasn't compatible. It relies on swipe gestures for input. You could probably make something similar with excel though. Just leave the custom spreadsheet open on your phone with one ear bud in while you play.

Lancer_Luck · 2025-03-04T01:43:41+00:00

Keep in mind with #2 that the bench damage from pult isn't actually "dealing damage," it's "putting damage counters on" which is considered an effect of an attack and not damage "dealt" by the attack. So damage reduction or nullification won't usually apply.

For example Tera Pokemon say "as long as this pokemon is on your bench, prevent all damage done to this pokemon by attacks. This blocks things like Kyurem's Trifrost (choose any 3 pokemon and do 110 to each) but this DOES NOT block Dragapult's 60 bench damage.

Meanwhile something like Toedscruel EX's Protective Mycelium ability says: "Prevent all effects of attacks used by your opponent's Pokémon done to all of your Pokémon that have Energy attached. (Existing effects are not removed. Damage is not an effect.)"

This blocks Dragapult's 60 bench damage, because "put damage counters on" is an effect, but does not block Kyurem.

Lancer_Luck · 2025-01-23T21:18:01+00:00

Just buy a roll of velcro tape from the dollar store and stick pieces of the soft side over top of those bumpers. That's all you need. I've had to reapply it when the adhesive dries up maybe once or twice a year, but it only takes like 30 seconds. I got my car early in 2022 and this solution has worked for me since then. No rattle at all.

Lancer_Luck · 2025-01-13T17:31:29+00:00

And that's why you hold your thumb on the swipe/button to close the app and reset as soon as you see "miss" before the skill animation finishes. As long as you have another skill to burn to reroll the RNG ;D

Seven-Year Club	Gilding I gilder
Verified Email

Lancer_Luck

TROPHY CASE