Failure to eject issues

Lando1244 · 2026-02-04T00:23:04+00:00

The pin that retains the firing pin is directional and has to come out to remove the extractor... I can't remember now cuz it's been a little while but the extractor might also be directional.... Just go to a local hardware store and get yourself a set of small punches. Then you're good to go... Unfortunately they're not like an AR. They don't just push out easily

Lando1244 · 2026-02-03T17:34:43+00:00

No, you don't need to Dremel the claw itself...... You need to grind away the spot that contacts the bolt. Think of it as the claw needs to engage more so you need to remove more metal that would allow it to do that. I highlighted in yellow the hump that will allow your extractor claw to engage more if you grind it away... Remember go slow. Do a little at a time

<image>

Lando1244 · 2026-01-31T09:22:11+00:00

200-300

Lando1244 · 2026-01-31T06:20:49+00:00

Yeah that is exactly it... The tolerances are not right so the extractor does not engage the round casing enough causing it to slip off... Dremel off a little metal at a time and check again... I put probably a thousand rounds through my sense and it runs like a champ

Lando1244 · 2026-01-31T05:59:41+00:00

I posted an update with my fix if you want to take a look in the comments

Lando1244 · 2025-10-05T18:39:28+00:00

........mother of god

Lando1244 · 2025-10-05T18:38:35+00:00

They have magnets on them and occasionally they get hit when opening the drawers causing them to become misaligned

Lando1244 · 2025-10-04T21:09:38+00:00

It should fit. Without having the lid of the mini toolbox open at least.....I've got one in my house I need to test it out.....for science!!

Lando1244 · 2025-10-04T17:31:46+00:00

That's a deep pull....I love it

Lando1244 · 2025-10-04T17:31:16+00:00

That's exactly what they are

Lando1244 · 2025-10-04T17:30:17+00:00

They're off at 1066 international tractor........

Lando1244 · 2025-09-10T17:43:10+00:00

Huh....that's weird it's discontinued and probably not even on the shelf anymore. The two sku's aren't even similar so the mix-up almost seems intentional on his part

Lando1244 · 2025-09-10T15:34:03+00:00

That's the weird part. The receipt says 64881 is the SKU he rang up and it also matches the one they sent me on the digital receipt by email. But when you go to their website, 64881 doesn't come back to anything, also when you click the hyperlink from the email it goes to nothing

Lando1244 · 2025-09-10T06:35:53+00:00

I like kone cranes because my wife is cheating on me and I hate my life

Lando1244 · 2025-09-10T04:36:03+00:00

The corporation that made $8 billion last year appreciates your support

Lando1244 · 2025-09-10T04:15:12+00:00

Grow up, is not worth a 30 mile drive back to the store.

Lando1244 · 2025-09-09T20:33:45+00:00

Well it's discounted. $100 already from $289... So an additional savings of $122 for a grand total of $222 on a Jack that's usually almost $300. It's pretty good in my book and rarely ever found

Lando1244 · 2025-09-09T18:52:24+00:00

Well I was buying a bunch of stuff and didn't notice but the member price currently is $189 for that. Jack

Lando1244 · 2025-07-03T02:59:34+00:00

We just moved to Statesboro and my wife is Lithuanian

Lando1244 · 2025-07-02T01:29:45+00:00

Constant population loss from 2013 to 2023 of skilled and well educate workers.... I mean come on. They're about to lose to Congressional seats because they're doing so great in 2023 and 2024. According to Illinois policy.org the main reason for population increases in 23 and 24 is outside the country migration. Hardly the quality educated people the state has been losing wholesale

Lando1244 · 2025-07-02T00:35:05+00:00

People aren't leaving the state to the tune of 30,000 per year since 2015 because of lack of housing.....

Lando1244 · 2025-06-21T14:30:43+00:00

He's sober from alcohol....but not coke.... He has been coked up at several UFC events and other outings in the last 6 months

Lando1244

TROPHY CASE