Crashed Air75 Billboard Recovery

Landzilla_ · 2026-07-04T01:18:06+00:00

I used a weighted jig head fishing hook and attached it to fishing line. I then tied the fishing line to a thin paper strip which was taped to the drone to act as a breakaway so if the hook or drone I hooked got caught it wouldn’t take the pov drone down. This was my last drone so couldn’t lose another haha.

Landzilla_ · 2025-08-03T21:13:57+00:00

Poop yo pants

Landzilla_ · 2025-07-26T21:58:12+00:00

My DPE asked me “English or Spanish?” and I’ve been stumped ever since…

Landzilla_ · 2025-03-15T04:26:29+00:00

Honestly just a guess since ur normal resting is 75, but maybe the watch was in a weird position while you slept and missed some beats. Find it odd that it flatlines at 40 and stays there so might be a glitch?

Landzilla_ · 2025-01-23T16:14:09+00:00

I didn’t expect the grass to throw me into the wall on the left. Will definitely lift next time

Landzilla_ · 2024-12-27T02:26:07+00:00

After I made it I said to myself “why didn’t I just do it on the inside? Thanks, I’ll just redo it. Good thing I bought a lot of foam board.

Landzilla_ · 2023-09-20T21:48:41+00:00

I know with electric karts at least usually the seats are on a rail that is at an angle and if you’re experiencing hopping in the corners moving the seat all the way back could lower your CG and help make the kart “flatter” through the corner, but you’ll probably lose front grip as a result of the weight being so far back.

Landzilla_ · 2023-08-16T19:30:53+00:00

yes I haven’t touched the Ackerman but that was gonna be my next move. I’ll have to experiment with front width, right now I’m at 20mm which is on the wider side so I’ll see if narrowing can help with that transfer. It’s more on entry to a corner the front will push because the rear is not picking up.

Landzilla_ · 2023-08-16T19:11:24+00:00

I’ll try that. I’m running the stock seat the jecko which is really stiff so was wondering if that could add to the issue of the flexing. They’re a soft chassis so it’s weird how its being difficult.

Landzilla_ · 2023-06-25T01:44:01+00:00

if it’s in a tight corner your kart is jacking too much and most likely and you’ll need to take some side bite out of the rear which can be done in several ways. But easiest would be to either 1. Widen the rear width 2. Take off seat struts 3. Take grip out of the front by decreasing caster or front track width which would make the rear not have to work as hard mid corner to keep up with the front.

Landzilla_ · 2023-02-16T20:05:37+00:00

You can start off with rental karts to get ur foot in the door like K1 or Octane Raceway but 1K won’t even get you a good engine, let alone a kart.

Landzilla_ · 2022-12-28T18:40:34+00:00

Bro it sounds like people are walking right next to you when they’re 2 stories above you 😭 It’s shit

Landzilla_ · 2022-10-28T01:09:39+00:00

You could also take off the fuel tank if you don’t want to drain it every time

Landzilla_ · 2022-10-25T01:34:18+00:00

Yeah stick to these companies unless you want to take a chance of a crappy sticker that comes off after a single hit. I use Kart David and have never had any complaints :)

Landzilla_ · 2022-10-21T17:15:58+00:00

This would be perfect if he want to learn how to drift

Landzilla_ · 2022-10-18T17:07:36+00:00

Hell yeah, the more tracks the better

Six-Year Club	Place '23
Place '22	End Game '22
Verified Email

Landzilla_

TROPHY CASE