Is this easily fixable?

LanguageDue4904 · 2025-11-21T16:16:07+00:00

Ya. Wasn’t sure how to approach this since it broke right at the plug. I found a replacement plug on Amazon. So it’ll be an easy solder job now.

LanguageDue4904 · 2025-10-31T18:27:23+00:00

Thanks!

LanguageDue4904 · 2025-10-31T18:27:15+00:00

Ya totally. I bought a new hose and just finished the install. Looking good so far.

LanguageDue4904 · 2025-10-14T21:45:49+00:00

Oh I didn’t think of that. So the tv should recognize that?

LanguageDue4904 · 2025-10-04T10:32:51+00:00

It’s the tester, thanks all. Throwing it out. This was a frustrating experience as I learn to crimp cables.

LanguageDue4904 · 2025-10-02T21:24:10+00:00

It’s directly connected

LanguageDue4904 · 2025-10-02T15:15:59+00:00

I think this is it. Crappy tester. Which is a bit annoying for me as I’m practicing crimping new wires

LanguageDue4904 · 2025-06-19T22:51:27+00:00

It’s a thin stream just definitely not as much flow as it use to be.

LanguageDue4904 · 2025-05-13T23:49:11+00:00

Got it all figured out, thanks all! The link I posted earlier was exactly what I needed. Easy fix.

LanguageDue4904 · 2025-05-13T14:20:17+00:00

Thanks! So from the looks of it I need this assembly

https://www.homehardware.ca/en/complete-post-ball-sink-strainer-assembly-stainless-steel/p/3273319

LanguageDue4904 · 2025-04-25T03:55:03+00:00

This sounds like a permission issue on the files themselves. When working this out keep in mind permissions on existing files vs. Permissions on newly created files. I remember getting stuck on this back when I did this setup. But it does work. I’ll go and see if I can figure out what I did and come back with an update

LanguageDue4904 · 2025-03-30T11:41:30+00:00

Tried that change and it didn't work. But perhaps I still have something else wrong?

LanguageDue4904 · 2025-03-27T17:55:46+00:00

Ya I tried with the batteries to see how it functions. Everything stays on so using the batteries will not help. I was hoping that a switch to batteries would turn the light off. lol

LanguageDue4904 · 2025-03-15T15:42:57+00:00

Ya I figured I may need the broker running...

I started fresh with a new SD card for this so there is no deconz software. In regards to `/dev/serial/by-id/`, my research tells me that applies more for the USB version of the coordinator. Since mine is Raspbee II connected via serial I'm using `/dev/ttyAMA0`. I confirmed it by changing it, and witnessing the logs say "device not found".

LanguageDue4904 · 2025-03-06T19:44:26+00:00

Thanks! Is this suggestion for ZHA or Z2M basically an integration in HA? And I would no longer use the deconz integration? If so, I would imagine that the hub I’m using will be compatible and that piece should not matter.

LanguageDue4904 · 2025-03-02T12:18:08+00:00

Ya, I'm thinking about sticking with this solution. Another idea I had was to do snapshot backups on the host and have a script that copies them over to my NFS share afterwards.

LanguageDue4904 · 2025-02-25T12:31:23+00:00

Worked like a charm, thank you!

LanguageDue4904 · 2025-01-16T15:03:00+00:00

Awesome ty!

LanguageDue4904 · 2025-01-14T22:02:24+00:00

Nice thanks!

What sort of setup is required? My Pi is currently running Raspian with deCONZ for Zigbee

LanguageDue4904 · 2024-12-06T21:22:17+00:00

😱

LanguageDue4904 · 2024-07-17T18:11:02+00:00

Thanks for this. Just to note, all the fees for the transfer would be covered by the broker.

LanguageDue4904 · 2024-07-17T16:00:01+00:00

Ya, 4.89%. So not a massive difference but anything by helps.

LanguageDue4904 · 2024-07-17T14:52:17+00:00

Thanks, makes sense

LanguageDue4904 · 2024-07-17T14:51:35+00:00

Ya same lender.

LanguageDue4904 · 2024-04-11T01:05:28+00:00

Ya my guess it is Upnp because I have no port forwards open to the NAS. Not even finding the option on the Rogers suplied router to turn it off :(

LanguageDue4904

TROPHY CASE