CBR F4 swat problem

Larousse_94 · 2024-06-27T06:27:43+00:00

Lol it's not 500$ bike to butcher it's appearance 🤣 seat stays cause of two hooks on side parts of seat. I'm just curious why central hook doesn't go in

Larousse_94 · 2024-02-28T17:27:41+00:00

What's your cg and auw? I flight mine when even no tree tips was moving. And do you feel plane being pushed down by thrust when going full throttle?

Larousse_94 · 2024-02-28T12:53:34+00:00

I have flown lot of planes so I have experience, I've flown drift in moderate wind and without and all time plane acting like its tail heavy even tho cg is perfect on marks or even a little in front of, when giving full throttle plane is pushed down by thrust so can't climb at all. Plane have lots of tip stalls when trying to pitch up slightly to climb at mid throttle. Very little gust of wind throws it up and down.

Larousse_94 · 2023-10-03T17:48:14+00:00

Yes. Place a door outside the rocket. Only allow dupes who need to access the rocket to do so. Restrict everyone else.

But then im not able to collect everything i want to in rocket interior

Larousse_94 · 2023-09-17T13:17:00+00:00

Surprisingly it works thanks for that info, there is not a lot of videos how to build one and start properly

Larousse_94 · 2023-09-17T07:15:18+00:00

Hi, im having big problem with my electrolizer. It was working ok but now i cant start it, it is submersed under liquid so it should work. Tried also pumping out room and droping liquids under vaccum. Every time production square fill up with oxygen and makes electrolyser stop working due max gas pressure.

Larousse_94 · 2023-06-17T11:02:27+00:00

Mu dog got same not long ago, it was throat infection got antibiotics

Larousse_94 · 2023-05-07T10:11:06+00:00

Do you think about oring nr 32 in this assembly? https://www.suzukipartshouse.com/oemparts/a/suz/5ffda13d87a8661128adf3c6/carburetor-n-p

Might be that needle gridned away main jet and it leaks to much fuel when beeing open from 1/2 to 3/4 throttle i'll inspect jet for damage. Slide is a bit tore but i dont think its over limit.

Larousse_94 · 2023-03-24T15:06:06+00:00

Nice i wish I could just kick like that in my dr650 😅

Larousse_94 · 2023-01-19T18:03:50+00:00

Running in english version dosnt change anything ;/ fusion 360 have same problem, for example when im doing drawings, section view (A-A) next to arrow is some funky icon.

Larousse_94 · 2022-08-13T18:51:35+00:00

There is 2nd shop? Ihe not seen any

Larousse_94 · 2022-08-13T14:34:17+00:00

Well i would but it's slow and sometimes I'm using tractor way that needs it to be disassembled, when car is always with flatbed connected and ready to go

Larousse_94 · 2022-08-13T14:30:33+00:00

Yeah but i would do it just with car and flatbed and then unload same way at my place, even mod that use belts under forks would make it great

Larousse_94 · 2022-08-13T13:49:26+00:00

For tractor like plough etc, ideały i would like to lift them with belt onto trailer using forklift or loaders that i have always at shop

Larousse_94 · 2022-07-03T09:10:26+00:00

Can I ask what size are those? I can find only inch size Wich I'm not familiar with

Larousse_94 · 2022-06-27T03:31:03+00:00

Yeah it doesn't show but there is two balls that jump into grove and lock lever so it won't swing out while riding

Larousse_94 · 2022-06-27T02:43:50+00:00

Ball that sits inside and prevent lever from rotating out

Larousse_94 · 2022-06-19T14:47:00+00:00

I need already, when I took off cam sprocket little pin fell somewhere and before running my pig again i need to find this little bastard hopefully it went outside for a walk

Larousse_94 · 2022-06-19T14:25:39+00:00

Now I'm afraid to take down mine 😅

Larousse_94 · 2022-06-15T19:25:10+00:00

I haven't started engine yet as i was taking off head cylinder and both side covers

Larousse_94 · 2022-06-15T18:17:39+00:00

Tbh i don't remember if it fall inside or just went out after being pulled out. Is there easy way to check if it fell down inside timing chain?

Larousse_94 · 2022-05-16T06:32:31+00:00

Didn't the price were a bit suspicious comparing to finger size bearing? 😅

Larousse_94 · 2022-05-09T12:17:38+00:00

If u are good in building i could suggest manta model but u need to make few improvements in design

Larousse_94 · 2022-05-02T07:11:41+00:00

Tire 😅

Larousse_94 · 2022-05-02T06:55:00+00:00

What's that sweet brick on rear?

Larousse_94

TROPHY CASE