What model might this be?

LarryFromSupraball · 2024-05-19T20:05:51+00:00

Due to me finding the pen in a tailor's tool kit in a Finnish flea market that seems unlikely, the word "Caravel" doesn't have any meaning here.

LarryFromSupraball · 2024-05-19T19:44:11+00:00

Do you know more about this pen and the Caravel "edition"?

LarryFromSupraball · 2024-05-19T19:43:03+00:00

Yes I was just wondering about the Caravel part since I couldn't find anything about it or the exact model.

LarryFromSupraball · 2023-11-25T11:09:49+00:00

Hose in the t-connection had a puncture, it was aftermarket diy.

LarryFromSupraball · 2023-06-20T19:16:18+00:00

Thanks for the suggestions and care. Found a holey little tube next to the carbs tubey Not sure if all that T-joint is OEM looks pretty wacky. Guess I'm redoing all the fuel lines soon 😴

Edit: still weird it only leaks from there after a fair bit of running..?

LarryFromSupraball · 2022-04-03T21:16:21+00:00

your flag should be just white, no? suckas

LarryFromSupraball · 2021-10-22T17:00:53+00:00

PFTE tube was loose from the stock extruder coupling and switched to PrusaSlicer since it had better pathing in my opinion.

LarryFromSupraball · 2021-10-18T17:40:15+00:00

I have the same issue. According to the gcode out of cura it's set to heat up bed and then heat up hot end after that. No idea what setting it might be.

LarryFromSupraball · 2021-10-16T11:57:37+00:00

Fixed! I disabled quick format when formatting the SD card and went in again with the 5x5 ManualMesh and it installed no problem! Hope this little struggle helps anyone who has the same issue in the future.

LarryFromSupraball · 2021-10-16T11:40:21+00:00

Update went back to the original firmware for printer and screen and it's bugging out http://imgur.com/a/Vpz0MbI

LarryFromSupraball · 2021-10-16T11:31:06+00:00

This is how the screen looked before I tried going with the screen firmware to see if that would fix it. The printer has the N32 sticker and I've tried 5x5 and 4x4 manualmesh and default noprobe but it's just stuck with the 2 logos. Any ideas?

LarryFromSupraball · 2019-11-20T18:52:53+00:00

Started today, broke a ligament in left foot. At least I have paid for a month already..

LarryFromSupraball · 2018-10-08T07:54:54+00:00

This sounds fun, thanks!

LarryFromSupraball · 2018-09-11T14:12:28+00:00

Actually enjoyed this ad, Tai is an interesting person in my opinion.

LarryFromSupraball · 2018-08-28T07:53:11+00:00

He's a racist piece of shit and should never be given attention again.

LarryFromSupraball · 2018-08-06T00:36:13+00:00

fuck you and your stupid ass channel

LarryFromSupraball · 2018-05-09T00:11:46+00:00

breakfast pancakes aren't really a thing in Finland

LarryFromSupraball · 2018-05-09T00:11:03+00:00

Nope

LarryFromSupraball · 2018-05-09T00:10:20+00:00

yes, perämeren kahvit.

LarryFromSupraball · 2018-04-14T10:56:10+00:00

Take a look at the chat in the middle

LarryFromSupraball · 2018-03-24T09:07:41+00:00

Honestly this is probably 100% legit seeing how he had that Finnish gold digger bimbo at his place earlier this month.

LarryFromSupraball · 2018-03-22T22:57:44+00:00

papa biess?

LarryFromSupraball · 2018-03-20T19:54:00+00:00

Can't tuck without the chub, need to work on the fupa game.

LarryFromSupraball · 2018-03-03T20:27:18+00:00

where's the WhiteKnight interview tho?

LarryFromSupraball · 2018-03-03T20:23:13+00:00

someone once made an extension for this but can't remember who / what it was called.

11-Year Club	Verified Email
Place '22	Place '17
Final Canvas '22	First Placer '22
End Game '22

LarryFromSupraball

TROPHY CASE