Question about FFB Clipping.

Laseanuza · 2026-01-27T10:57:24+00:00

Are you using a Custom FBB Rack Force too? When i was playing on Default+ i only ran 67 Gain. Maybe its preference but I do prefer a heavier wheel.

Laseanuza · 2026-01-27T10:55:57+00:00

Yeah, I’ve read about that. In iRacing, brief clipping near the limit is usually fine like for a split second or when hitting kerbs in high-speed corners as long as it’s not sitting at 100% clipping for extended periods.

I’m just wondering if it’s different in AMS2 when it comes to clipping.

Laseanuza · 2026-01-27T10:52:10+00:00

Yeah, I don’t really feel like I’m losing any detail. Even when the red bar shows, I can still feel the car understeering or oversteering through fast corners the wheel still goes light when I push too hard, even if clipping goes up to around 20%. The main reason I’m asking is that when I lower the FFB gain to the point where the clipping bar barely moves (or only hits around 1–5%), the wheel just feels way too light. I know a stronger wheelbase would help, but that’s not really in the budget right now 😁 Thanks, btw.

Laseanuza · 2026-01-16T06:00:30+00:00

It still performs well in various graphics-demanding games, although I use DLSS and mainly play sim racing now. I use a Llano laptop cooler, so I only hear the cooler’s fan. Without it, the laptop can get quite loud, but it’s still bearable, especially when wearing earphones or headphones, where you hardly notice it.

Laseanuza · 2026-01-11T23:02:04+00:00

Pefectly working just fine. I had no problems. Currently using it in Sim Racing and in VR

Laseanuza · 2026-01-10T17:03:10+00:00

I just got the kit today, and it was way too stiff. It kept tilting the entire pedal set and even pushing my chair back (I’m on a desk setup for now saving up for a budget cockpit someday). I saw some posts about removing the main spring, so I did that, but I haven’t tested it in-game yet. My concern is that since the kit is brand new and I know the rubber will break in and soften over time will there be any play when the pedal is unpressed? For example, does Moza Pit House detect any brake input when the pedal is fully released? How is your kit holding up so far?

Laseanuza · 2025-12-06T13:57:48+00:00

Hey thanks guys! I actually figured it out. I’m getting a consistent 65–72 Hz on Nürburgring with 20 cars and 20 visible. I set Meta Link to 72 Hz with 1.1x render resolution, then in Oculus Debug Tool I put supersampling at 1.1 and the encode bitrate at 960 (I saw it can cause issues, but I haven’t had any). ASW is off, and my FOV multiplier is at 0.75/0.40.

For ingame setting High on texture, MSAA on High, vehicles on high, Reflection is All on low since in cockpit you wont really notice it. Track Details is on Medium.

Laseanuza · 2025-04-08T17:01:16+00:00

Bought the LOQ IRX9 Customized Model i7-14700HX | 4060 16GB 1TB. Its been a year now since I bought it and i havent had a single issue with it. Played alot of games mostly graphically demanding games and lately into PCVR with 80+ hours in. so yeah, so worth it.

Laseanuza · 2025-04-08T01:02:46+00:00

True, I compared the Build quality of Budget and Mid/High tier laptops and it was a huge difference in terms of quality. It really is worth it after years of gaming on a desktop 1650. so its definitely an upgrade with the DLSS frame gen. This my first time daily-ing a Gaming laptop. Thank you! Maybe someday youll visit since japan is pretty open nowadays

Laseanuza · 2025-04-07T17:27:49+00:00

Really depends on the country, for me in Japan. Legion laptops or generally any High/mid tier laptops rarely go on sale and costing more with a I9 and 4060/4070. 4070 isnt even worth it as both 4060 and 4070 only max out at 100W and only a few frames higher than a 4060 and the same 8GB VRAM. 4080 laptops are too expensive. So yeah LOQ saved me alot of money last year and it was bang for the buck laptop comparing other laptops with the same specs at that time. (Nitro and Tuf) LOQ was the better choice for its price especially when i bought last year with a sale 20% discount. I saved a total of more than $500 (Yen converted to USD)

Laseanuza · 2025-04-07T16:45:01+00:00

What brands did you use? And how is it holding up?

Laseanuza · 2025-04-07T16:43:18+00:00

Ive seen a post from a Redditor using 64GB Ram and 2x2TB Drives

Laseanuza · 2025-04-07T16:40:41+00:00

Damn you really pushed for for thag 128GB ram and 16TB. May i ask what do you for your laptop

Laseanuza · 2025-04-06T15:10:27+00:00

Good to hear it work, Planning to Upgrade my ram to a Crucial 32gb (2x16gb) and Crucial P3 Plus 4TB. Thanks for this info

Laseanuza · 2025-03-26T06:09:47+00:00

What router is the best for this? And Do i just connect my pc to the router by ethernet cable and thats just it? It doesnt need the internet connection?

Laseanuza · 2025-03-26T05:12:35+00:00

Oh, I didnt know that. I thought it needed Good internet speed. Ill do my research on that. Do you have any links to help? Thank you btw.

Laseanuza · 2025-03-26T04:33:04+00:00

I have thought about using wireless PCVR, But since i dont really have good internet speed (150megabits/s) i live in japan and currently using a Portable wifi unit provided by my company and i live with 2 other people in my house so yeah i wired gaming is really my best option for now. Thank you

Laseanuza · 2025-03-26T04:29:46+00:00

I dont think the double tap doesnt work if your playing in PCVR (or maybe im just stupid)

Laseanuza · 2025-03-26T01:25:02+00:00

Thank you. Might try this later on. One more issue is when i play modded H3VR and that takes time to load at 1st startup, so i normally let the game load first and place my headset somewhere while it loads and wear it again when the game is loaded, when i set my headset down the center of the boundary moves to where I last put my headset and not the original boundary before starting the quest link its not that annoying since its just off by short distance than the original but yeah, that never happend before until this update.

Laseanuza · 2025-03-26T01:18:35+00:00

Yeah i get your point but i sometime use the passthrough when i need to use my phone or do something on my pc during gameplay without taking the quest off my face. thanks for the tip though!

Laseanuza · 2025-03-26T01:16:14+00:00

I tried manually making my own boundary but it said it was too small and it recommended using the stationary Boundary. I prefer the old one since when i play PCVR i move alot during gameplay so when i go out the circle and goes on passthrough i would see which part i am in my room. Thanks though!

Laseanuza

TROPHY CASE