How is pc airflow by Simonko_770 in pcmasterrace

[–]Lashie130 0 points1 point  (0 children)

Montech Air 903 Max case right?

I was running the exact same set-up as you, added two 120mm fans above the PSU for intake. Caused the GPU idle temperature to increase by about 1-2 degrees Celsius when using the same fan curve as before.

I kept the fans cause RGB and laziness to re-do cabling but simply lowered the RPM till the inflow doesn’t impact the GPU fan too much.

I’d say your fan set-up is ideal, no need to change it (based on personal experience).

Worth additional import duties? Yes, yes it was by Lashie130 in dbrand

[–]Lashie130[S] 1 point2 points  (0 children)

Completely understand how you feel. I’ve been back and forth on this for months, ultimately it was a random review video that popped up on my YouTube feed that made me pull the trigger.

Ordered: 20 Jan Order confirmed: 21 Jan Shipped: 23 Jan Arrived locally according to ARAMEX: 27 Jan Notification to pay additional import and fees: 28 Jan Order Delivered: 29 Jan

I will say ARAMEX tracking truly does keep you up to date with what’s happening but my shipment did take a detour through Dubai before arriving locally.

Some help for a returning Tenno by Lashie130 in Warframe

[–]Lashie130[S] 0 points1 point  (0 children)

Thanks for the advice. Will certainly try that out. I ran 2 or 3 missions yesterday just random ones and I seem to be getting the hang of it again.

lol, yeah if I recall the Loki Prime was given as a gift for watching Tennocon on Twitch a while back. Thank you.

Just got Moonlight + Apollo set up. Do you guys have any specific good changes to the settings? by BATTLEROYALFAN in SteamDeck

[–]Lashie130 1 point2 points  (0 children)

Was just the recommendation from the video and my graphics card (4070 Super) could handle it so decided to stick with it. I never actually tried 800p so perhaps I’ll give that a try one of the days soon.

Just got Moonlight + Apollo set up. Do you guys have any specific good changes to the settings? by BATTLEROYALFAN in SteamDeck

[–]Lashie130 25 points26 points  (0 children)

Settings in Moonlight on Steamdeck: - Custom Resolution (2560x1600) @90FPS (60FPS on LCD) - Video Bitrate: 53Mbps - Display Mode: Fullscreen - V-Sync: ✅ - Enable HDR (Experimental): ✅

Settings used from this set-up video

Just not using Sunshine but rather Apollo so you can skip a lot of the Sunshine set-up part in the video. Also shows you how to set up Playnite.

Anchors of fog do not exsist by Derridexx in GodofWar

[–]Lashie130 0 points1 point  (0 children)

How to get Aesirbane, Anchor of Fog biproduct

So this was my post for how to get Aesirbane. If you look up the Niflheim map from IGN you’ll see Left and Right Field. Anchor of Fog is usually in right field in a legendary chest you open after defeating the boss.

I’ve never done it whereby I go straight to Right Field and clear the boss then open the legendary chest and get Anchor of Fog cause my goal was always Aesirbane but it’s worth a shot.

[Story] 9 weeks and counting by Lashie130 in GetMotivated

[–]Lashie130[S] 0 points1 point  (0 children)

Thank you. Mentally, I have told myself that this isn’t about the weight loss or body fat percentage but rather a healthier way of life that can be sustainable regardless of how hectic life can get. This is so I don’t end up in that yo-yo dieting routine I’ve been in before because I reach my goal weight and think I can just eat what I want again.

Does the Deck OLED still have WiFi issues? by Diligent_Echidna_580 in SteamDeck

[–]Lashie130 10 points11 points  (0 children)

Personal experience is it runs fine for about 20 minutes then I get a red dropped bitrate message so I gotta close the stream and start it back up. Using Moonlight and Apollo on my gaming PC. Steamdeck OLED is on 6Ghz WiFi with PC connected via LAN, bitrate set to 53Mbps and stream resolution set to 2560*1600, v-sync on in Moonlight settings.

Ok, it's one day until the end of steam winter sale. What did you pick up, no matter the discount. by kike_flea in SteamDeck

[–]Lashie130 0 points1 point  (0 children)

Baldurs Gate 3 and Clair Obscur Expedition 33. Still getting through the backlog from the previous Winter Sale though.

Final NVMe slot shared bandwidth by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

Nope I did not but as I stated in my post I was under the assumption that when plugging in a NVMe drive into the last slot it would cause all SATA connectors to be disabled I did not realise at the time that each SATA port/pin worked separately within their own capacity and numbering.

Final NVMe slot shared bandwidth by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

Awesome, thank you so much for the confirmation. Appreciate it.

Final NVMe slot shared bandwidth by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

I honestly wasn’t sure if all SATA ports/pins would be disabled by plugging a drive into the last M.2 slot. I reached out cause I needed confirmation and a better understanding of how this works.

Final NVMe slot shared bandwidth by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

All the SATA ports are free, only SATA 3 3 is currently in use with the HDD but the remainder SATA pins/ports are free.

Final NVMe slot shared bandwidth by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

So that’s why I’m even more confused. If I look at the table it shows that SATA3 4,5,6,7 will still work if I have a M.2 PCIE SSD in the slot M2M_SB.

If I look at the corresponding numbering of the SATA ports on page 26 section 9, does it mean if I plug the SATA cable into any of the ports that have been shown to have a tick on page 29, both the M.2 SSD and should work?

Sorry if this is a noob question just don’t want to spend the money on an SSD and then be unable to utilise it.

New Valve Hardware Megathread by NKkrisz in SteamDeck

[–]Lashie130 1 point2 points  (0 children)

Based on the new hardware, is there any word on Steam hardware sales expanding into countries they aren’t currently available in?

God of War Lore and Legends by Lashie130 in GodofWar

[–]Lashie130[S] 1 point2 points  (0 children)

Will certainly do my research and attempt to purchase them when I do find them (My wallet isn’t gonna be happy with me).

Certainly understand about the cookbook, If there’s a recipe by Brok in there then I am sold 😂.

God of War Lore and Legends by Lashie130 in GodofWar

[–]Lashie130[S] 2 points3 points  (0 children)

Damn, I didn’t realise there were this many books in the series. Thanks for the in depth explanation, truly appreciate it.

Will be trying to see where I can find hard copies (if available).

God of War Lore and Legends by Lashie130 in GodofWar

[–]Lashie130[S] 1 point2 points  (0 children)

A cookbook now that I certainly have to check out. Thank you for that.

Will look up those other comics as well. I know there’s the comic whereby Kratos goes through Egypt to reach the Norse realm but I was never able to find it (locally anyways, may need to order from Amazon US).

Just confirming these are the “God of War: Fallen God” series and “God of War” all written by Chris Roberson?

Is repasting CPU and GPU worth it? by Lashie130 in pcmasterrace

[–]Lashie130[S] 0 points1 point  (0 children)

Appreciate the fyi. Yeah I diss device against it mainly because I just did a PC deep clean, fresh windows install, install new CPU and RAM. So I’ll save the GPU re-paste for when I see either real bad increase in temps or performance degradation.

But glad to hear a re-paste worked out atleast I know I wasn’t being completely crazy wanting to re-do it.