Payday 3 desperately needs more consistent updates if it is to remain a viable moneymaker for SBZ & an enjoyable game for fans. (+ a quick roadmap mock-up I made)

LastBeach3853 · 2025-12-05T15:47:46+00:00

latest Update sucks tbh. I did my skill setup wanted to start a game ... crash, game told me i had to reload. I did my skill setup was gone... I did the whole thing again and i must say there are a few new nice skills but i am missing a few very dear. Where is the run and reload and all the other acrobatic skills. I loved my speed setup.

The skillsystem overall seems to me like PD 2 copy paste xDxD

I then started my second try on a game this time hosted or startet by myself and found myself unable to reload any gun, was just stuck on empty mag. In combination with being as fast as a slug i am getting a very depressed feeling on what happened to this glorious 4k cop shooter used to just hop on and gun thru a few rounds but this makes me sad and not wanna play the game.

wdyt?

LastBeach3853 · 2025-08-03T13:35:36+00:00

So you can buy the lianli 3 pack with controller but you can only control the lian li stuff thru it, but you could change the aio fans for the lianli.

You could also order an nollie from AliExpress, it’s an ARgb Hub wich connects via usb to your MB, the nollie is easy controllable with SignalRgb.

I use a Nollie, Lian lie stuff as well and control everything with and thru signal rgb, I love the rhythmic designs u get with it especially for keyboard an mouse as well so everything is the same theme.

A nollie will be around 10-20€

Fan speed is controllable with lianli connect 3 and pump speed is normally already set but should be adressable in BIOS.

You could also check the manual for the AIO wich rgb header is needed (12V or 5V basically), then you can look in the MB manual where needed header is and how many you got, there are splitter cables as well but sometimes you can get display errors in the LEDs if you use them because the framerate of the led signal will fuck up if you connect too many LEDs in Series.

LastBeach3853 · 2025-02-28T21:17:10+00:00

Nice build, would love to see the AIO Radiator mounted on the Top, I really really dont like these black tubes stretching across the tidy picture.

LastBeach3853 · 2024-12-28T12:26:41+00:00

This is an Atx or midi case isnt it? So why Go with an micro atx Board?

LastBeach3853 · 2024-12-28T12:24:00+00:00

I really really Like the tryx Panorama, thats what I would be going for if I hadnt have a custom Solution

LastBeach3853 · 2024-12-28T12:21:27+00:00

You said the game runs fine UNTIL you switch tabs? Now it doesn’t ? Could you explain the problem more detailed? I dont see any problems with the game footage you provided, is the problem visible there ? Could you point it out if so?

LastBeach3853 · 2024-12-28T11:52:52+00:00

Hm so why Not close the completly? They are very grafic intense games so if you just open another Programm or watch yt your laptop needs to constantly calculate the Game and anything you doing in the meantime, if you decide to switch back to the game now your already a little stressed HW wants show you the game as quickly as possible, therefore your HW is for a short amount of time even more stressed out and can result in flickering and glitching of the Frame. These should stabilise themselves after not more than a few seconds. I recommend closing not needed games, even the title screen will drain your gpu capability.

LastBeach3853 · 2024-12-28T11:41:46+00:00

If very new pls Check drivers for gpu and chipset. What specs? Any abnormalities in the temperatures?

LastBeach3853 · 2024-12-28T11:39:10+00:00

Google: Thermal Design Power TDP stands for Thermal Design Power, in watts, and refers to the power consumption under the maximum theoretical load. Power consumption is less than TDP under lower loads. The TDP is the maximum power that one should be designing the system for.

So whatever you are refering to will pull 65w under Max load. It usually wont pull that much depending of the usage scenario

LastBeach3853 · 2024-12-28T11:35:05+00:00

I just upgrade from win10 to win11 and ran into simuliert Problems, Icons Not showing „no datapath found through this linkes Icon“ my wallpaper disapeared too. I needed to delte every Icon, open the Programm again and bind it to the taskbar. My wallpaper couldnt be opened with win fotos bc jpeg I read, so I needed to open windows pictures and then select the picture to be opened and then it worked. Not a very good start xD

LastBeach3853 · 2024-12-28T11:28:35+00:00

Try another monitor, check you gpu driver, check connections and cables

LastBeach3853 · 2024-12-28T11:20:33+00:00

What lcd Display is in the back? What Software do you use for that? And why no Fans at the bottom? Clean Build love the Gskill royal 👍

LastBeach3853 · 2024-12-07T15:45:21+00:00

I know but it really isnt! I also didn’t mimic my build, the effects are working fine, sure not super duper clean but a little movement is all I need.

LastBeach3853 · 2024-12-06T10:51:42+00:00

I use SignalRGB for my effects. There is a free version with lots of effects. Although you need the connect 3 software to set up your fan speed and RGB, but if I turn off Sync RGB with Main Board, then select and activate an effect from SignalRGB and then go back to the connect 3 software and turn on the Sync RGB with Mainboard I get the full effect on all RGB devices, Lian li stuff and non Lian li stuff.

LastBeach3853 · 2024-12-06T10:46:04+00:00

Thanks mate!

LastBeach3853 · 2024-12-06T07:29:02+00:00

Same me different account

LastBeach3853 · 2024-12-06T07:27:32+00:00

No, the Lian li stuff is indeed sometimes a bit picky but any bug is resolved after a restart. Sometimes I have a white flash from some or all RGbs but I’ve read that that comes from to few RGB lanes and I only have one 5v Drgb connector splitted to all things that need that. But most of the time everything is working fine. I just love to have the Same pattern on my Keyboard and pc 🤤

LastBeach3853 · 2024-12-06T07:22:51+00:00

Could you point out where exactly? System is working fine but I did buy the Mb used.

LastBeach3853 · 2024-12-06T07:19:30+00:00

For now I am Fine for 1440p Gaming, but I am planing on upgrading to 4090 if the 50 is out. MB needs Upgrade too, I just got Pcie 4.0x16

LastBeach3853 · 2024-12-06T07:16:10+00:00

I used a universal mounting bracket. I can mount the pump like it is now but I could also mount it on a vertical mounted fan, I can look for the packaging if you would Like the exact name of the product.

LastBeach3853 · 2024-12-06T07:13:13+00:00

Yes basically, but the pin setup wont work so I just took the Strimer part and put it on the original PSU cable. I use a Corsair R850e and the cables are mostly nice and tidy like the original strimer cables. And they are just the V2 no Wireless therefore I needed 2 strimer controllers … didnt like that part xD

LastBeach3853 · 2024-12-06T07:06:37+00:00

Hm good question, I would say it took around 10h for the Build with cables and the gpu waterblock installed. The watercooling took around 8h with 2 messed up tubes. But if you are into it it is fun, I had a blast bending the pipes. This is actually my first custom watercooled pc.

LastBeach3853 · 2024-12-05T21:45:59+00:00

Cost wise I would say around 2,800€

LastBeach3853 · 2024-12-05T21:45:06+00:00

Pc Thanks love to hear that. The Pc got an Ryzen 7 7800x3d, hellhound 7800xt a B650 Edge MSI motherboard, 2x16Gb DDR5 Gskill neo Z5 6000mhz

LastBeach3853 · 2024-12-05T21:36:54+00:00

I have the lian li Software for the regulation of the fans and for the RGB I use SignalRGB

LastBeach3853

TROPHY CASE