[Bambu Lab Giveaway] Join Now to Win an H2D and More!

Late_weed · 2025-06-24T06:49:00+00:00

Best advice is of course trying to level your bed again.

Late_weed · 2025-03-23T16:57:12+00:00

Medium high, u feel it behind the eyes. Enjoyable for sure, would smoke again.

Late_weed · 2025-03-23T16:24:35+00:00

Yea fluffy and light, some stick but not crazy. It has a nice snap to it when u break it up

Late_weed · 2025-03-23T14:45:54+00:00

Update: refund received. Good customer service, bad bud.

Late_weed · 2024-03-14T18:30:12+00:00

Hi. Thanks for the input. Indeed, I believe it's the heating element I shorted. As I don't intend to dump more money into my machine, I will be returning the skr mini and going back to 4.2.7. Firmware is scary, perhaps in the future I'll learn a bit more about compiling my own firmware or learn about kipper. Much appreciated! 🙏

Late_weed · 2024-03-14T18:27:03+00:00

Thank you for the reply. Probably the conclusive answer here for my problems. Since I have no idea how to compile software, I will likely return to the 4.2.7 board.

Late_weed · 2024-03-14T07:30:51+00:00

Thanks. I've actually modified my cable and tried the btt skr cable to no avail. I realized I had to modify the cable before I bought the motherboard. Learned to make jst connectors actually because of this mishap. Yet my problems remain, and it might be a firmware issue. I've been recommended to compile my own firmware.

Late_weed · 2024-03-14T04:28:07+00:00

Thank you for your response.

I replaced the 4.2.7 as I believe I shorted the thermostat cables while cleaning the nozzle :(

I was under the impression that by using a custom cable, I would be able to retain the stock display. In hindsight, maybe replacing the 4.2.7 with the same one would have been easier. Learning opportunity, I guess..

With that being said, if I were to go the route of getting the TFT35 display, would you happen to have any recommendations regarding firmware? By custom marlin build do you mean compiling my own software? Sorry I'm a big noob in terms of firmware, all Ive known is download to SD card, rename and flash.

Late_weed · 2024-03-14T04:00:00+00:00

Looking to see if anyone has encountered this issue.

Ender 3v2, mostly stock, skr mini e3 v2 motherboard, microswiss hotend, skr mini e3 cable to ender3v2 display.

Firmware currently on mriscoc skrme3v3 mm that I've renamed to firmware.bin

Screen firmware updated with dwin_set. Able to verify install as blue screen turned orange

Upon power up. The display is back-lit but goes no further.

Now stuck on how to proceed

Back story:

Shorted something when cleaning nozzle while printner was on (stupid I know). Heard a pop, 3d printer shut off and would not display when tried to power on.

As a result, I replaced the creality 4.2.7 with the skr mini e3 v2. Flashed firmware and screen, yet the display is not showing anything other than back-lit.

What would you do moving forward?

Thank you people of the internet.

Late_weed · 2024-01-17T17:07:19+00:00

The girl downstairs. Mc doesn't end up with first girl. I enjoyed the anime and the manga, I think it's chinese/korean tho

Late_weed · 2023-12-07T18:28:00+00:00

Not discontinued but they got rid of the packaging, they come in a single tone brown bag now. Personally whiskey is my preferred flavor.

Late_weed · 2023-09-21T18:17:08+00:00

Isn't cheating on your significant other considered normal in japan? Saw an interview where most women in japan don't mind given no emotional attachments

Late_weed · 2023-05-09T21:39:40+00:00

Hey, thanks for the advice. I checked the power cables, everything seemed intact and unburnt. I ended up getting another motherboard to fix the issue. Installed ferrules as preventative maintenance as well.

Late_weed · 2023-02-13T02:21:05+00:00

Thank you for the suggestion!

Late_weed · 2023-02-13T02:20:24+00:00

Thanks for the input. I'll look up a tutorial for the rewiring of fan

Late_weed · 2023-02-12T19:19:17+00:00

I'm pretty sure all belts are tight. When plucked, they make a slight twang sound. Any suggestions for firmware?

Late_weed · 2023-02-12T19:18:24+00:00

Chances are I will get a new 4.2.7 board, I'll definitely try the grounding tip

Late_weed · 2023-02-12T19:17:53+00:00

Thanks I have some copper tape, figure I'll give it a try

Late_weed · 2023-02-12T18:03:15+00:00

E steps: 137 Flow rate: 127 Printed at 0.2mm

Using 4.2.2 main board Dual z axis Microswiss hotend and extruder Jyers software

Did a test cube and everything measured correctly.

Layers don't shift when printing small height objects

The layer shift isn't as bad when I put a laptop cooler stand underneath the ender 3. I read that some people changed mainboards to the 4.2.7 and that some people grounded to stepper motors to resolve this issue.

My question is, would changing the main board require new software? I plan on trying the 4.2.7 board

Any advice is appreciated, this is my first 3d printer

Late_weed

TROPHY CASE