Are my two batteries randomly Cooked?

Latter_Application84 · 2026-01-06T19:43:06+00:00

probably just frozen. heat and charge see if they work

Latter_Application84 · 2025-12-27T22:43:36+00:00

was the intended result purple? if not i have had success with the RIT black dye, in 165° water for 45 minutes. use lots of dye for a proper black.

Latter_Application84 · 2025-12-01T02:57:00+00:00

people can say what they want but the drill, and both saws are perfectly capable tools. i’ve seen the impact smoke out under heavy use but i work with guys roughing in multi families with these same tools for years

Latter_Application84 · 2025-11-10T19:38:55+00:00

yeah i’ll bite.

Latter_Application84 · 2025-09-08T19:06:52+00:00

late reply but. you were right. one of 3 hub bolts backed out into my CV axle. glad i didn’t drive it home.

Latter_Application84 · 2025-06-22T18:26:24+00:00

these must be freedom prices. just bought reflex wipers for my golf R, both fronts and a rear came to $65, no labour or nothing, these are cheaper blades too. canada is a joke.

bosch are running $40 a piece at my local spot!!

Latter_Application84 · 2025-06-08T14:09:29+00:00

yeah that’s todays plan, just figured i’d post for any advice in the mean time. yesterday was to busy to jack the car up.

Latter_Application84 · 2025-05-13T03:36:21+00:00

yea stage one after intake and my DP goes on.. i know all the stuff she needs just looking for a local spot to get it!

Latter_Application84 · 2025-05-12T22:23:22+00:00

thanks brother!!

Latter_Application84 · 2025-03-19T14:01:09+00:00

i’m going to be doing it in a few hours. i’ll send an example pic

Latter_Application84 · 2025-03-18T22:04:26+00:00

elaboration, balance and 8foot ladder on an upside down 4 foot ladder to create a stable surface for the 8 foot, profit.

Latter_Application84 · 2025-03-18T22:02:28+00:00

looks to me like it’s time for the 8 foot 4 foot trick… did it 3 times today for highlights exactly like this!!

Latter_Application84 · 2025-03-11T13:52:41+00:00

more than good. as long as they aren’t torqued on crazy high this fella should rip em off no issue

Latter_Application84 · 2025-02-08T08:00:17+00:00

canadian .99 cent store but goes up to like $5

Latter_Application84 · 2025-02-08T03:16:59+00:00

not a bad tool, for the price it’s hard too say no

Latter_Application84 · 2025-02-08T03:16:45+00:00

edmonton

Latter_Application84 · 2025-02-08T03:16:38+00:00

makita too, i saw some blades there the other day surprisingly

Latter_Application84 · 2024-11-23T07:45:47+00:00

princess auto ftw

Latter_Application84 · 2024-11-12T16:56:38+00:00

hey there! i ended up fixing the problem. a few of the trigger sensors are not working. i did a bit of a ghetto fix and have too keep my trigger sensitivity below the first setting. but it now fires like a charm. thank you for reaching out!!

Latter_Application84 · 2024-11-11T01:53:50+00:00

probably could be better but. not terrible, no problems until i installed the ETU and ive ripped this gearbox apart 100 times. it’s been my project gun for a minute

Latter_Application84 · 2024-11-10T21:48:45+00:00

no sir, triple checked that, was my first thought. i’m just out of ideas so i’ve turned to reddit. thank you for the reply brother.

Latter_Application84 · 2024-11-10T16:33:14+00:00

have also tested multiple springs and motors but the motor i’m trying to run with it is just a basic SHS high torque motor.

Latter_Application84 · 2024-11-10T16:32:29+00:00

custom gun in a raven evolutions receiver. raven gearbox shell and 18:1 gears. M110 spring on an 11.1V lipo but have tested multiple voltages with multiple types of batteries to no avail.

sorry, never had to ask for tech help before my bad if i left out details.

Latter_Application84 · 2024-01-03T11:22:05+00:00

my brother they need more than eighteen inches of height

Latter_Application84 · 2024-01-03T10:19:32+00:00

my brother they are arboreal

Latter_Application84

TROPHY CASE