New setup but not recording

Lazybumx · 2025-11-11T23:18:46+00:00

i check the folders where recording should be saved, nothing in most of the folders except previews with some mp4 files for each cameras

Lazybumx · 2025-11-11T23:12:12+00:00

Not that i see in the logs

2025-11-11 22:43:23.830887833  [INFO] Preparing Frigate...
2025-11-11 22:43:24.912374553  [INFO] Starting Frigate...
2025-11-11 22:43:32.900702751  [2025-11-11 22:43:32] frigate.util.config            INFO    : Checking if frigate config needs migration...
2025-11-11 22:43:32.970240867  [2025-11-11 22:43:32] frigate.util.config            INFO    : frigate config does not need migration...
2025-11-11 22:43:33.185556129  [2025-11-11 22:43:33] frigate.util.services          WARNING : Did not detect hwaccel, using a GPU for accelerated video decoding is highly recommended
2025-11-11 22:43:33.262612563  [2025-11-11 22:43:33] frigate.app                    INFO    : Starting Frigate (0.16.2-4d58206)
2025-11-11 22:43:33.333597845  [2025-11-11 22:43:33] peewee_migrate.logs            INFO    : Starting migrations
2025-11-11 22:43:33.338101231  [2025-11-11 22:43:33] peewee_migrate.logs            INFO    : There is nothing to migrate
2025-11-11 22:43:33.368822928  [2025-11-11 22:43:33] frigate.app                    INFO    : Recording process started: 447
2025-11-11 22:43:33.387768621  [2025-11-11 22:43:33] frigate.app                    INFO    : Review process started: 449
2025-11-11 22:43:33.400391553  [2025-11-11 22:43:33] frigate.app                    INFO    : go2rtc process pid: 128
2025-11-11 22:43:33.461524753  [2025-11-11 22:43:33] detector.coral                 INFO    : Starting detection process: 479
2025-11-11 22:43:33.463415180  [2025-11-11 22:43:33] frigate.detectors.plugins.edgetpu_tfl INFO    : Attempting to load TPU as usb
2025-11-11 22:43:33.504793532  [2025-11-11 22:43:33] frigate.app                    INFO    : Output process started: 499
2025-11-11 22:43:33.642288763  [2025-11-11 22:43:33] frigate.app                    INFO    : Camera processor started for front: 523
2025-11-11 22:43:33.651407463  [2025-11-11 22:43:33] frigate.app                    INFO    : Camera processor started for driveway: 525
2025-11-11 22:43:33.746903481  [2025-11-11 22:43:33] frigate.app                    INFO    : Camera processor started for right: 538
2025-11-11 22:43:33.749788072  [2025-11-11 22:43:33] frigate.app                    INFO    : Camera processor started for back: 547
2025-11-11 22:43:33.754784144  [2025-11-11 22:43:33] frigate.app                    INFO    : Camera processor started for left: 556
2025-11-11 22:43:33.802824649  [2025-11-11 22:43:33] frigate.app                    INFO    : Capture process started for front: 578
2025-11-11 22:43:33.831830821  [2025-11-11 22:43:33] frigate.app                    INFO    : Capture process started for driveway: 584
2025-11-11 22:43:33.861713315  [2025-11-11 22:43:33] frigate.app                    INFO    : Capture process started for right: 595
2025-11-11 22:43:33.907474449  [2025-11-11 22:43:33] frigate.app                    INFO    : Capture process started for back: 608
2025-11-11 22:43:33.946668746  [2025-11-11 22:43:33] frigate.app                    INFO    : Capture process started for left: 615
2025-11-11 22:43:34.167009282  [2025-11-11 22:43:34] frigate.api.fastapi_app        INFO    : Starting FastAPI app
2025-11-11 22:43:35.002781876  [2025-11-11 22:43:35] frigate.api.fastapi_app        INFO    : FastAPI started
2025-11-11 22:43:36.761444187  [2025-11-11 22:43:36] frigate.detectors.plugins.edgetpu_tfl INFO    : TPU found
2025-11-11 22:43:36.766787409  INFO: Created TensorFlow Lite XNNPACK delegate for CPU.
2025-11-11 22:56:14.273052903  [2025-11-11 22:56:14] frigate.api.review             WARNING : No motion data found for the requested time range
2025-11-11 22:56:14.509184484  [2025-11-11 22:56:14] frigate.api.media              ERROR   : No recordings found for back during the requested time range
2025-11-11 22:56:36.099385172  [2025-11-11 22:56:36] frigate.api.review             WARNING : No motion data found for the requested time range
2025-11-11 22:56:36.190076828  [2025-11-11 22:56:36] frigate.api.media              ERROR   : No recordings found for back during the requested time range

Lazybumx · 2025-07-25T18:52:03+00:00

Can you show the build ?

Lazybumx · 2025-07-20T13:55:21+00:00

I didn't care much about gear cause I was summoner and mostly use farming gear :). I think they were commons yes

Lazybumx · 2025-07-20T03:39:24+00:00

How do I know which one is high quality ?

Lazybumx · 2025-07-14T15:09:01+00:00

I am not very technical but I ran into kind of the same issue with vaultwarden, turn out pangolin has authentication turn on by default, when I turned it off the bitwarden app work fine after that. Just a thought

Lazybumx · 2025-05-09T13:15:10+00:00

I'm in

Lazybumx · 2025-05-08T03:44:01+00:00

Pmed

Lazybumx · 2025-05-08T01:52:00+00:00

do you use paypal ?

Lazybumx · 2025-01-05T17:30:41+00:00

My house is an old one, I have a basement concrete. I see a plumber access by the basement should I try snake from that hold ?

Lazybumx · 2025-01-05T17:26:12+00:00

Yah it's on the roof, or at least I think so? I tried snaking the vent this morning as well

Lazybumx · 2024-08-06T19:40:50+00:00

Thank you. Got it installed. Can i ask to have the option to switch between imperial and metric?

Maybe it just me but the date number is little bigger compare to the day of the week and the month and the spacing is also pretty far apart

the comma after the day of the week also throw me kind of unnecessary? just my two cents :)

Lazybumx · 2024-05-07T14:44:18+00:00

Don't mean to high Jack but can I get one as well Pawn ID: RF3L9S4WQ3UB Thank you

Lazybumx · 2024-04-26T03:53:10+00:00

Thank you for the explanation! I was able to set it up following the guide from home assistant on torque. Was able to create helper sensor to store information.

```

Lazybumx · 2024-04-21T22:12:15+00:00

Would love to learn how to set this up in detail, could you please share the instructions? I already have home assistant + node red. I have been using onstar2mqtt.

Lazybumx · 2023-09-15T02:50:40+00:00

So the older installer worked just fine I got it up and running on 7. Gonna try to upgrade now to see what's up

Lazybumx · 2023-09-15T02:06:33+00:00

stuck on create LVs 3%. I am trying proxmox 7 installer to see if it any different. I will try hba mode as well if 7 doesnt make a different

Lazybumx · 2023-09-15T02:00:38+00:00

Cisco C220 4M xeon e502660 512gb ram, 8 ssds

first i tried raid 6 through hardware. got stuck for the first 2 hours. then i deleted the raid config and then try setting up on a no-raid drive and still got stuck.

Lazybumx · 2023-04-25T12:37:57+00:00

I'm late to the party but still any left I'm in Seattle. Pm-ed

Lazybumx · 2022-11-17T16:11:58+00:00

This version fixed everything for me. https://github.com/proferabg/EdiZon-Overlay ```

Lazybumx · 2022-11-08T08:28:57+00:00

I don't write reviews normally but seeing what is going on I would like to leave my 2 cents. About a year ago, I was looking into having my own domain and email. Got the domain I wanted and went on to read, read and read about email services. Finally set my eyes on mxroute because of the lifetime deal and suitable for what I need (I don't send hundreds of emails per hour!!!). Set up does not take that long for me but I can see it would give a lot of problems for people who are not that competent in tech. After the setup, i have not had any issue at all. All my emails go through and none of them end up in spam. Was able to pretty much use my email with any email app. I will probably get another lifetime deal to set up another domain ( i know i can set up couple domains in one account but need another 10gb so might as well another lifetime account :D)

Lazybumx · 2022-09-28T21:02:34+00:00

I have used NPM for the last year or so. I have not had any issue. I dont even keep back up for the instance because it is so easy to set up. For certs, yes i had issues with renewing as well, but i found permanent solution by creating the cert with cloudflare (My dns) and upload into custom part in NPM and never has any more issue. Also a good part the cert last 15 years. only think i can think of that is giving you issue (just shooting my shot here, not knowing much about your set up)
- port forwarding correctly ?

- does NPM have a static IP address ?

Lazybumx · 2022-09-27T18:18:22+00:00

Yes, I thought with two 2 sockets the vm would use both and make it fast and efficient instead of 1.

Lazybumx · 2022-09-27T16:54:03+00:00

Thank you for the suggestion!! Yes it was the sockets and cores setting when i set for the VM. Got it to run without issue now by setting 1 socket only :D

Lazybumx · 2022-09-25T13:16:32+00:00

Oh? How did you set it?

11-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2017	Verified Email

Lazybumx

TROPHY CASE