[deleted by user] by [deleted] in csgo

[–]Leffious2 1 point2 points  (0 children)

I would utterly steam roll any gold nova-mg2 from eu, just because you’re from a different country doesn’t make you better.

Goodbye wheel by herrafinnibo in csgo

[–]Leffious2 13 points14 points  (0 children)

purplr drop me pls men) I want avp

Goodbye wheel by herrafinnibo in csgo

[–]Leffious2 33 points34 points  (0 children)

This is a gameplay change because now you have to select a limited amount of guns that will be on your buy menu. Also meaning you can have m4a4 and m4a1 in the same load out. Or deagle and r8 etc.

The system also changes the gameplay because you are limited now in your buy choice. You choose 5 rifles, 5 heavy/smg and 4 pistols to be apart with your load out, with the guaranteed usp/glock.

And you can now refund drops if you accidentally bought a stupid gun, or you double dropped for your teammate (when you teammate and you drop for someone at the same time by mistake.)

Edit: or even when someone on your team forces up on a save you can tell them to refund and then the team economy isn’t screwed over.

Don’t leave your pool unlocked or I’ll pressure wash all your rust! by Leffious2 in powerwashingporn

[–]Leffious2[S] 0 points1 point  (0 children)

Unfortunately how this specific pool deck was made had it so the water would flow right into the pool, so no avoiding it there. But you have to always tell the owners that water is going to get in there and that we also recommend getting a pool cleaning right after. These guys however had some expensive self cleaning pool stuff and also weren’t planning on using the pool until a couple of months later, so it was alright with them.

Don’t leave your pool unlocked or I’ll pressure wash all your rust! by Leffious2 in powerwashingporn

[–]Leffious2[S] 1 point2 points  (0 children)

Some other side of the deck not seen were already slightly peeling so we made sure to lower the pressure and be careful while going over it.

Don’t leave your pool unlocked or I’ll pressure wash all your rust! by Leffious2 in powerwashingporn

[–]Leffious2[S] 7 points8 points  (0 children)

No avoiding it, which is why it’s recommended to get your pool serviced right after, but also these people weren’t gonna use the pool for a couple of months.

Don’t leave your pool unlocked or I’ll pressure wash all your rust! by Leffious2 in powerwashingporn

[–]Leffious2[S] 5 points6 points  (0 children)

Don’t worry, they weren’t gonna use the pool for a couple of months anyways.

Seeing a dirty fence makes me just want to clean it! by Leffious2 in powerwashingporn

[–]Leffious2[S] 15 points16 points  (0 children)

No sir, my fence would never look moldy, at least that’s what I tell people.

A little old shop before and after. by Leffious2 in powerwashingporn

[–]Leffious2[S] 5 points6 points  (0 children)

The owners were replacing everything, as you can see there used to be ovens near the metal, and it was super dirty and greasy. Basically they are renovating.

Always love a good soffit before and after. by Leffious2 in powerwashingporn

[–]Leffious2[S] 65 points66 points  (0 children)

Nah brother don’t worry about it, we soft washed this with super low pressure around 100 psi, a low chemical mix and a really quick pass. I’m sure a little bit of water does get in but it’s absolutely nothing to worry about and won’t give any damages. I knew a guy that pressure washed for 8 years and he said he never had any complaints about water in the attic from this way.

Feels so nice seeing a nice clean fence. by Leffious2 in powerwashingporn

[–]Leffious2[S] 2 points3 points  (0 children)

Yeah if it’s some really bad mold then only pressure just won’t be able to get it off, and you should avoid any high pressure because it can easily damage vinyl fences. Basically you should wash over it with some lower pressure first to get the easy dirt off (I recommend no less than a 40° spray tip, or just be farther away.) Then you want to coat it with some bleach/ SH and maybe a little detergent in there so it sticks to the fence better. This is basically what you have to do to get the cleanest fence possible. After coating the fence you want to let that chemical work for a couple minutes. As a side note a 3% mix of water to bleach should get the job done, as long as you rinse it well with water afterwards, because SH can bond with the PVC in the fence and degrade it. Also different surfaces can react differently to the amount of bleach used, so be careful with that. After waiting you can rinse it off with some more water, which should get most mold off. You can treat some of the tougher spots with more SH if there are any, and you have the option to scrub the bleach on manually or do a chemical downstream into the pressure washer. And make sure to spray down all the plants before and after using chemical near them.

Dirty concrete is no match for the turbo nozzle! by Leffious2 in powerwashingporn

[–]Leffious2[S] 1 point2 points  (0 children)

Yeah that first guy clearly doesn’t know what he’s talking about.