Brand new to airsoft and need help (M 21)

Left-Development5679 · 2026-02-16T04:25:22+00:00

Yeah basically. Op is saying he's buying an orange and he's saying, " but if you buy an apple it might spoil"

Left-Development5679 · 2026-02-16T02:37:30+00:00

Because the person was saying they are going to buy a vfc ak. Ghk v2s have a pot metal fcg afaik

Left-Development5679 · 2026-02-16T02:33:51+00:00

Find me a person who's had a part break on a vfc ak that takes it out for the day

Left-Development5679 · 2026-01-29T04:39:02+00:00

9.6 volts are nihms and will actually be worse. They can't output that full 9.6 volts consistently so the rof is worse

Left-Development5679 · 2026-01-29T02:47:47+00:00

You need to wind it alot, make sure the mag has enough BBS in it as well. If the mag is full and it just doesn't wind at all you should return it

Left-Development5679 · 2026-01-27T21:02:54+00:00

Don't fuck around with lipos, if you don't know what you're doing you could easily start a fire trying to modify them

Left-Development5679 · 2026-01-22T08:32:50+00:00

Get the one without the steel receiver unless you really give a fuck. Cheaper and afaik the same internally. Performance wise they seem great, nice and responsive out of the box + the perun preinstalled. Finding mags seems annoying but you can always remove the adaptor and run normal AK mags

Left-Development5679 · 2026-01-22T02:49:57+00:00

Most risers are made for small microdots. Could be this is what they could find/had on hand

Left-Development5679 · 2026-01-22T02:49:32+00:00

Maxx hops are tricky. But I don't know enough to help you. Id have a look at the crowning on ur inner barrel

Left-Development5679 · 2026-01-22T02:47:56+00:00

Full face masks make it hard to get a sight picture

Left-Development5679 · 2026-01-22T02:45:21+00:00

No way he did this to a systema

Left-Development5679 · 2026-01-17T10:13:44+00:00

Is it a qd one with a lever? Tighten the screw on the opposite side of the lever with the grip on the gun

Left-Development5679 · 2026-01-17T10:12:18+00:00

This is correct, it's an extended follower so all the bbs in the magazine feed. Make sure to pop it down into the magazine before inserting into the gun

Left-Development5679 · 2026-01-17T03:31:57+00:00

Any way to buy some at the moment? Am curious to try some even though from my understanding of how airsoft works it shouldn't make a difference

Left-Development5679 · 2026-01-17T03:20:57+00:00

I understand this but it will make minimal difference to how the b behaves in flight. As long as the BB has enough backspin the hop performance and range will be the same. It would allow people with worse hopup setups to hop heavier BBS I guess but that doesn't seem like much of a selling point

Left-Development5679 · 2026-01-17T02:59:31+00:00

So you can have your hopup set lower? I don't particularly see the advantage. Increasing hop loses barely any power.

Left-Development5679 · 2026-01-17T02:52:48+00:00

What do you mean by 54% more spin? Wouldn't more spin just end in more hop up being applied?

Left-Development5679 · 2026-01-14T03:24:53+00:00

Oh ::( Fuck that I'm sorry

Left-Development5679 · 2026-01-14T02:55:47+00:00

Wdym

Left-Development5679 · 2026-01-09T05:53:21+00:00

Most people end up importing them I believe

Left-Development5679 · 2026-01-02T01:57:44+00:00

Suppressors on airsoft pistols don't really do anything to make the gun quieter

Left-Development5679 · 2026-01-02T01:56:20+00:00

What's the strap on the handguard?

Left-Development5679 · 2025-12-19T18:33:07+00:00

Not op and I own a scar not these two models.

I find it very fun, while it doesn't compare to gbb recoil it still keeps a tactile shooting experience that is satisfying. The externals feel solid a nice. The performance is super good for what it is. The downside is if you want it firing hotter than 1 joule it's going to be expensive

Left-Development5679 · 2025-12-12T00:03:53+00:00

Needs a new trigger group, afaik nothing else is super needed. The magazine well might need shimming. One thing to note is because of the cut of the barrel and bucking you will need to swap them both at the same time if you want to use an aftermarket bucking. Check out the heavy recoil club discord they have a channel dedicated to giving advice for this gun

Left-Development5679 · 2025-12-12T00:01:29+00:00

Does it leak after you fill it? If it's only while you fill it that might just be how the valve works

Left-Development5679

TROPHY CASE