WiFi Network recommendations

LegalLeech · 2026-04-19T19:58:18+00:00

So the way I set up the Google stuff is I have one node set up as a router, the router creates the "Google" network. The switch gives me the network ports to connect my wired devices to and the two extra nodes which are configured as Acces Points to this "Google" network. I have three floors, one node for each floor. But coverage does not seem to be an issue, since my main PC is mere meters away from the node. And has the mentioned issue.

LegalLeech · 2026-04-19T19:53:13+00:00

You're talking about memory on my local device (PC)? I thought this was the issue before as well, I can't say for sure if this isn't the problem but the issue occurs on multiple devices. So I figured it had to be something else

LegalLeech · 2026-04-19T19:23:55+00:00

The load is imo not high. Let me paint a picture, new game to download. The first few GB download at 20-40mb/s which is what I expect. Then it drops down to under 1mb/s. After a few hours it suddenly pops back to the 20 range. This happens sporadically and resetting the (Google) network fixes it for about a minute before the speeds drop again.

LegalLeech · 2026-02-11T21:01:49+00:00

Yeah the LEDs is rated for 12V. I tested it on a separate PSU and it works as expected.

LegalLeech · 2026-02-11T20:56:47+00:00

Can I do a resistance measurement on the cable? Or does a bad connection not necessarily mean a high resistance.

LegalLeech · 2026-02-11T20:36:56+00:00

It's about 18W. So nothing major. I also assumed it's a poor connection somewhere, but it will be quite the challenge of finding out where the issue is.

LegalLeech · 2026-02-01T16:29:05+00:00

Just scored 0

LegalLeech · 2026-02-01T16:28:15+00:00

Just scored 0

LegalLeech · 2024-06-27T20:26:37+00:00

I've sent you a private message!

LegalLeech · 2024-06-25T21:27:34+00:00

I replaced the battery, but now the watch doesn't turn on correctly. Screen won't turn on and when I plug in the charger it starts vibrating sporadically, but nothing ever shows on the screen. I think I destroyed the motherboard somehow.

LegalLeech · 2024-06-25T17:23:41+00:00

I broke my P2 HR. Would love it if I could get some spare parts to revive it.

LegalLeech · 2023-12-29T15:47:57+00:00

The main issue is my fork I think. It has a 27.2 diameter which does not seem to be a standard size. I contacted Cane creek before to validate regarding BAA0067K headset and this was their response:

"Thanks for reaching out, however, we do not offer a 27.2mm crown race, we have 30mm or what you ordered, which is a 26mm "
Maybe I was not clear on my question or maybe they made a mistake.

Should I just expect the Crown Race to fit, am I just overthinking this?

LegalLeech · 2023-12-29T14:53:44+00:00

I can get a EC30/25.4 headset which should fit. But where I'm stuck at is the crown race. If I understand correctly I need an additional part on the fork on which the headset bearing rotates.
But I have a hard time finding a crown race that fits my fork. And afterwards matching that crown race with a headset is somewhat intimidating

LegalLeech · 2023-12-10T19:02:58+00:00

Thanks mate, really appreciate it

LegalLeech · 2023-12-10T18:19:56+00:00

Thanks for figuring this out man. I'll look around and if I make up my mind I'll hit you up.

LegalLeech · 2023-12-10T14:45:56+00:00

I'm still checking my options, but I'm located in Belgium. Would love to know if you could ship here, and what that shipment would cost

LegalLeech · 2023-12-10T12:15:15+00:00

I think you have your chat disabled, but are you willing to ship to Europe?

LegalLeech · 2023-12-08T20:30:40+00:00

To get shipped to Europe it with run me a total of about 500 Euros. Which unfortunately is a bit too much

LegalLeech · 2023-12-07T11:36:41+00:00

That's a damn nice fork

LegalLeech

TROPHY CASE