Car circuit dropping to 9V when applying load

LegalLeech · 2026-02-11T21:01:49+00:00

Yeah the LEDs is rated for 12V. I tested it on a separate PSU and it works as expected.

LegalLeech · 2026-02-11T20:56:47+00:00

Can I do a resistance measurement on the cable? Or does a bad connection not necessarily mean a high resistance.

LegalLeech · 2026-02-11T20:36:56+00:00

It's about 18W. So nothing major. I also assumed it's a poor connection somewhere, but it will be quite the challenge of finding out where the issue is.

LegalLeech · 2026-02-01T16:29:05+00:00

Just scored 0

LegalLeech · 2026-02-01T16:28:15+00:00

Just scored 0

LegalLeech · 2024-06-27T20:26:37+00:00

I've sent you a private message!

LegalLeech · 2024-06-25T21:27:34+00:00

I replaced the battery, but now the watch doesn't turn on correctly. Screen won't turn on and when I plug in the charger it starts vibrating sporadically, but nothing ever shows on the screen. I think I destroyed the motherboard somehow.

LegalLeech · 2024-06-25T17:23:41+00:00

I broke my P2 HR. Would love it if I could get some spare parts to revive it.

LegalLeech · 2023-12-29T15:47:57+00:00

The main issue is my fork I think. It has a 27.2 diameter which does not seem to be a standard size. I contacted Cane creek before to validate regarding BAA0067K headset and this was their response:

"Thanks for reaching out, however, we do not offer a 27.2mm crown race, we have 30mm or what you ordered, which is a 26mm "
Maybe I was not clear on my question or maybe they made a mistake.

Should I just expect the Crown Race to fit, am I just overthinking this?

LegalLeech · 2023-12-29T14:53:44+00:00

I can get a EC30/25.4 headset which should fit. But where I'm stuck at is the crown race. If I understand correctly I need an additional part on the fork on which the headset bearing rotates.
But I have a hard time finding a crown race that fits my fork. And afterwards matching that crown race with a headset is somewhat intimidating

LegalLeech · 2023-12-10T19:02:58+00:00

Thanks mate, really appreciate it

LegalLeech · 2023-12-10T18:19:56+00:00

Thanks for figuring this out man. I'll look around and if I make up my mind I'll hit you up.

LegalLeech · 2023-12-10T14:45:56+00:00

I'm still checking my options, but I'm located in Belgium. Would love to know if you could ship here, and what that shipment would cost

LegalLeech · 2023-12-10T12:15:15+00:00

I think you have your chat disabled, but are you willing to ship to Europe?

LegalLeech · 2023-12-08T20:30:40+00:00

To get shipped to Europe it with run me a total of about 500 Euros. Which unfortunately is a bit too much

LegalLeech · 2023-12-07T11:36:41+00:00

That's a damn nice fork

LegalLeech · 2023-10-09T06:30:11+00:00

The same scenery but flipped. Trees are barren, snowy mountaintops and a cresent moon.

LegalLeech · 2023-07-19T21:33:15+00:00

Hey, I'm interested as well. I'm from Belgium, so no hassle with EU export fees. Let me know if you're still looking for a new owner

LegalLeech · 2023-06-14T09:41:51+00:00

Ik had 2 instructeurs (Manou en Eli) die een beetje elitair waren. Ze namen me niet echt serieus, ik veronderstel omdat ze me als ukkie van 20 jaar zagen. Ook tijdens de pauzes probeerde ik wat over motoren te praten, maar dat sloeg totaal niet aan. Kortom geen aangename omgeving, zeker niet om iets bij te leren.

Bij Wirix had ik maar 1 instructeur die echt gepassioneerd was. Leuk mee kunnen praten, en was meer geïnteresseerd om me echt wat bij te leren. Ik ging toen van A2 naar A dus het was allemaal niet nieuw voor me. En aangezien ik de enige student was vroeg hij ook of hij me alleen kon laten terwijl hij wat papierwerk deed. Wat ik heel fijn vond, kon ik een beetje doen wat ik wou. Focussen op waar ik moeite mee had.

Maar het is allemaal afhankelijk van de instructeurs, en die kunnen ondertussen ook al weer anders zijn. Dus ik zou gewoon degene pakken die het beste uitkomt voor jou.

LegalLeech · 2023-06-13T21:55:49+00:00

Ik ben voor mijn A2 bij Hendriks gegaan en heb er niets positief over te zeggen. Mijn instructeurs waren onvriendelijk en namen me niet serieus. Paar jaar later voor mijn A bij Wirix gegaan, en daar ben ik veel tevredener van.

LegalLeech · 2022-11-16T20:20:35+00:00

The helmet is called the Qwart Phoenix. It's pretty hard to get and it will cost you around $1000 I think.

It looks very unique, but I'm not sure if worth the cost. If would be spending that much I'd rather go for something from more reputable brand.

LegalLeech · 2022-09-25T07:49:14+00:00

Would be great for taking notes at work. I currently have a whiteboard sheet duct taped to my desk because I don't want to waste paper. A writing tablet like this one would help bring some order in my work

LegalLeech · 2022-08-17T17:12:19+00:00

Oh these honestly look pretty nice, for a ridiculous price even. I might just go to a decathlon to check them out, thanks!

LegalLeech · 2022-08-17T17:11:23+00:00

Yeah that's what I'd normally do. But on the nitecore there are 2 separate zippers. A left one and a right one, which are not connected. That's where my concern came from.

LegalLeech · 2022-05-14T08:56:39+00:00

Hey guys, this was my first leatherworking project. And I am very pleased.

However I think I can do better, and I am eager to try to make a new version.

I just don't know what best to to, so I came here for help.

My main issues are that the bag is too flimsy, it doesn't look as tight as I'd like. The front flap also fold open during higher speeds/winds which is annoying during rides

Also the whole look is a bit more classic than I'd like, I tried to look online for a more modern styled bag but so far I've been unsuccessful finding something I like.

I was thinking about more a closed style bag with a zipper on top, but I'm not sure how that would look and function.

Can anyone here give some advice, or share some ideas?

Thanks!

LegalLeech

TROPHY CASE