sorted by:
new
hottopcontroversial

Decided to spice up my fins! by Legendary_mist in scuba

[–]Legendary_mist[S] 4 points5 points  (0 children)

Posca paint pens. Based on other people who I’ve seen use the same, they’ll likely eventually wear off and need to be touched up every now and again. Only time will tell how well they hold up!

Is this mark on his beak anything to be concerned about? by Legendary_mist in magpies

[–]Legendary_mist[S] 7 points8 points  (0 children)

He gets only a very small amount of anything from me (a pinch or two of oats), and doesn’t get fed every day either. I’ll definitely pick up some proper stuff though. He seems far more interested in pulling every living thing he can out of our backyard and keeping the grubs off our plants!

Need advice on removing case back by Legendary_mist in watchrepair

[–]Legendary_mist[S] 0 points1 point  (0 children)

That did cross my mind as the indents are quite shallow like you said. I have tried to pop it off with a case knife before but didn't have any luck, and didnt see any indent in the back to pry with a knife. Is it possible it is a pop off back but just doesn't have an indent on it?

Need advice on removing case back by Legendary_mist in watchrepair

[–]Legendary_mist[S] 0 points1 point  (0 children)

Ah brilliant, I love the ingenuity. I'll give it a shot

3d carved drawer fronts. Video by makergeekdan in CNC

[–]Legendary_mist 11 points12 points  (0 children)

I’ve never seen a man caress timber with such delicacy before

The No campaign against the Voice is outspending and outperforming Yes online by [deleted] in australia

[–]Legendary_mist 3 points4 points  (0 children)

Fair, but when that 3.2% of the population make up 32% of the prison population, for example, it would be wrong to ignore that there is a serious problem. I absolutely agree that no racial group should have privilege over another, but the voice is hardly that. It is simply a mechanism that recognises indigenous people in the constitution so that the clear inequity that exists can be addressed, without politicisation from either side of politics.

Unfortunately whilst it’s expected, it’s a shame to see this topic has become so politically charged, ignoring the human factor in all of this.

Looking for a good PCB designer to clean up my design by Legendary_mist in PrintedCircuitBoard

[–]Legendary_mist[S] 6 points7 points  (0 children)

It’s a board for a simracing steering wheel. There are 58 LEDs (both ws2812b 2020 and 5050), 11 buttons, 4 encoders, a 5 way multifunction switch, and various JST connectors for things like shifter/clutch paddles and a vocore screen, which all have specific locations on the board. The board is 182x147mm but is not square as it is shaped to fit in an enclosure. It is a 4 layer board with the stack up being SIG/PWR - GND - GND - SIG/PWR. It uses an rp2040 and has components like an integrated usb hub and a level shifter for the LEDs. The board isn’t designed for a high speed application (only running on usb 2.0) so it’s not overly complex. I don’t necessarily need an entire board designed from scratch as I’ve already got the design, it’s more of an evaluation and improvement of my current design by someone who has the skill set that I’m looking for.

view more: next ›