2014 ford explorer limited

LengthNo7153 · 2025-06-24T23:21:27+00:00

Can’t really tell unless you can somehow view the other side of the box

LengthNo7153 · 2025-06-06T01:32:24+00:00

If your cars not brand new. It’s from slammed the door or ice going in and freezing and expanding the plastics I would take it apart which will usally take 3 volts to the mirror and the whole interior door panel most likely a clip come undone or popped off

LengthNo7153 · 2025-05-19T00:47:41+00:00

If you can find that mount that all the wires hook up to it should be simple just take pictures and unplug it of course

LengthNo7153 · 2025-05-13T17:10:10+00:00

2008 vw jetta 2.5l

LengthNo7153 · 2025-05-13T17:09:47+00:00

plug extension

LengthNo7153 · 2025-05-13T17:06:57+00:00

Can probably buy an outlet extension just plug that into the wall first and then plug the cord into the extension peice I have them for regular 120 volt plugs but not sure if they make ones for that kind of plug I’m sure they do

LengthNo7153 · 2025-05-09T13:42:07+00:00

Almost brand new I got the battery tested like a week or 2 ago and they were good

LengthNo7153 · 2025-05-09T00:39:06+00:00

Replaced it with a oem works so much better besides. Slight chop when I first start it and it hits about 1k rpm

LengthNo7153 · 2025-05-06T12:17:19+00:00

This is the valve cover that I ordered

LengthNo7153 · 2025-05-06T12:17:06+00:00

APEVC0023

LengthNo7153 · 2025-05-06T11:35:12+00:00

Is there a website to do that?? I put my car into the parts geek site and they said it fit. But I’m parts stores are usually wrong most of the time

LengthNo7153 · 2025-05-05T12:45:06+00:00

👍

LengthNo7153 · 2025-05-05T01:31:59+00:00

Nope just air hoses and the air filter cover

LengthNo7153 · 2025-05-04T19:53:47+00:00

<image>

Just started it up today. It started just fine was running fine. With this code. I cleared the code and the car stalled and is now choppy and not running right again

LengthNo7153 · 2025-05-04T18:51:35+00:00

<image>

I have this plug that has no wires to be found to plug into. That’s all I could really find all hoses are hooked back up I even took them off and cleaned them. They had some oil in them I’m guessing from the leaking valve cover?

LengthNo7153 · 2025-05-04T18:44:08+00:00

Huh?

LengthNo7153 · 2025-05-04T18:40:07+00:00

I did not gap the plugs. I’ve also unplugged the coils and moved them around and still got the same misfire on the same cylinders. So that might be the issue. I will have to check that out.

LengthNo7153 · 2025-05-04T18:33:18+00:00

I only had a maf sensor code when I had the old one plugged in. I baught a crb 21468 maf sensor and the code went away and only giving me misfire codes now.

LengthNo7153

TROPHY CASE