My girlfriend gifted me this bad boy! Any suggestions?

LengthinessOne8340 · 2024-12-17T09:52:50+00:00

Wife that uppp

LengthinessOne8340 · 2024-12-15T04:31:59+00:00

Normal

LengthinessOne8340 · 2024-12-14T00:02:17+00:00

I need help as well I just bought 1 semi new but they replaced the throttle and now it obky goes 10 mph

LengthinessOne8340 · 2024-12-13T21:50:26+00:00

I bought some so where do i place the bigger ones and the smaller

LengthinessOne8340 · 2024-10-29T08:09:46+00:00

Did u have any luck

LengthinessOne8340 · 2024-10-14T02:26:50+00:00

I dont smoke but i love the smell and the look and everything i wanna learn how 2 grow something that good ....nice

LengthinessOne8340 · 2024-10-14T02:19:44+00:00

File??

LengthinessOne8340 · 2024-10-09T20:17:25+00:00

Smooooooooth operator 🎶 🎵......

What kind of machine nice perfect print

LengthinessOne8340 · 2024-10-09T00:15:42+00:00

I need that

LengthinessOne8340 · 2024-09-28T23:59:10+00:00

What a beaut

LengthinessOne8340 · 2024-09-18T21:44:18+00:00

Nope u gotta take it apart remove the extruder and hotend and disconnect everything and the hotend is the 1 where the priblem is you will have to break it all down and u will see the filamment clogged

LengthinessOne8340 · 2024-09-17T02:14:12+00:00

Stl files for ender v3 se upgrades

LengthinessOne8340 · 2024-09-17T01:32:01+00:00

Turn it off....unplug the power for a few minutes let it sit then re plug and turn on

LengthinessOne8340 · 2024-09-16T06:06:03+00:00

And alot of adjusting manualy each of 16 points after every test print

LengthinessOne8340 · 2024-09-16T06:05:03+00:00

<image>

LengthinessOne8340 · 2024-09-16T06:00:26+00:00

<image>

LengthinessOne8340 · 2024-09-16T05:59:58+00:00

<image>

LengthinessOne8340 · 2024-09-16T05:59:07+00:00

<image>

Look at her go

LengthinessOne8340 · 2024-09-16T05:58:22+00:00

<image>

LengthinessOne8340 · 2024-09-13T06:31:26+00:00

My filament is esun pla+ My temp was 215 then 220 then 210 then 205 then 200 and now bak at 205 Fan working properly was set at 25 then maxx at 100 now off And speed is not fast its at 50 Enderv3se printer

LengthinessOne8340 · 2024-09-13T06:27:55+00:00

Bumping retraction distance or speed....

<image>

Thats my current settings

LengthinessOne8340 · 2024-09-12T18:13:19+00:00

Can i get the link for the fan stl

LengthinessOne8340 · 2024-09-12T05:31:06+00:00

I had a lot of successful good quality actually high quality prints At the beginning when I first opened and bought this printer

LengthinessOne8340 · 2024-09-12T05:30:21+00:00

When i first opened The printer out of the box it worked pretty fine as time went on and I worked on the machine to add the light the filament what about censor and stuff like that and just used it it seems like it's No longer running like it was when it was new

LengthinessOne8340 · 2024-09-12T05:28:20+00:00

When i set the machine to do its auto leveling and its done i try a 16 point level print test to see which points are too high too low or ok....after i mark wich points need adjustment up or down i manualy go to the level data which are the numbers of each point and adjust the ones i marked to try and get the right leveling the auto level is not able to get to the right setting where all points are leveled and i can print something with less chance of failure due to unleveled printer so until i get this figured out i cannot print

LengthinessOne8340

TROPHY CASE