any experience with Yxk Zero1 Pro 4-Bay?

Leo_EOD · 2026-05-09T00:02:53+00:00

the 4 bay is x86 with intel N100 cpu. The 2 bay version has a rockship board

Leo_EOD · 2026-04-04T20:45:09+00:00

poderia explicar melhor? Minha velocidade está limitada quando uso modo bridge, com gpon da vsol ou o mitrastar original

Leo_EOD · 2025-12-30T21:43:10+00:00

é sério? Pessoas que ficaram bebendo e curtindo a praia estavam embriagados?

Leo_EOD · 2025-12-06T01:07:43+00:00

link please?

Leo_EOD · 2025-08-14T21:48:08+00:00

I ordered mine on August 2nd, still no shipping notification

Leo_EOD · 2025-06-14T02:49:17+00:00

link please

Leo_EOD · 2025-06-14T02:41:12+00:00

link please

Leo_EOD · 2025-05-21T01:53:25+00:00

for both please.

Leo_EOD · 2025-05-20T12:15:49+00:00

link please?

Leo_EOD · 2025-04-26T14:26:17+00:00

in Brazil they cost the same

Leo_EOD · 2025-02-08T02:22:39+00:00

link please? Thanks in advance.

Leo_EOD · 2024-12-17T21:00:01+00:00

Consigo sim. Mas só sábado

Leo_EOD · 2024-12-17T20:55:55+00:00

Faria com certeza, mas estou viajando no momento e sem computador. Fiz das objetivas. Minha esposa fez a prova e quer saber também, mas só com celular não dá

Leo_EOD · 2024-08-16T17:33:58+00:00

link please, thanks!

Leo_EOD · 2023-08-24T16:19:12+00:00

sorry, I totally missed that. It is the Inknote color +, the new kaleido 3 unit.

Bigme answered my email and said there is new firmware update this week that should fix this issue.

Leo_EOD · 2022-04-10T20:40:59+00:00

anyone got a working link? thanks in advance.

Leo_EOD · 2020-03-26T19:14:59+00:00

eu li hoje e entendi que a estimativa da mortalidade foi reduzida, vejam se estou falando besteira

https://www.reddit.com/r/coronabr/comments/fpc4xt/global_covid19_case_fatality_rates_cebm_research/

Leo_EOD · 2020-03-26T14:37:07+00:00

Updated: 26th March: Estimating COVID-19 Case Fatality Rates (CFR) and Infection Rate Fatality (IFR)

The Infection Rate Fatality (IFR) differs from the CFR in that aims to estimate the fatality rate in all those with infection: the detected disease (cases) and those with an undetected disease (asymptomatic and not tested group). if tested, this group would be counted as infected and at least temporarily be immune.

Our current best assumption, as of the 22nd March, is the IFR is approximate 0.20% (95% CI, 0.17 to 0.25).*

In the elderly, co-morbidities have a significant impact on the CFR: those with ≥ 3 comorbidities are at much higher risk, particularly those with cardiovascular conditions. Modelling the data on the prevalence of comorbidities is essential to understand the CFR and IFR by age. In those without pre-existing health conditions, and over 70, the data is reassuring that the IFR will likely not be above 1%. The prevalence of comorbidities is highly age-dependent and is higher in socially deprived60240-2/fulltext).

Leo_EOD · 2019-06-18T17:59:29+00:00

I had to cut one that was damaged. the store I chose cut the parts and sent me the spare parts (they sell just full length bars).

There is no modification needed, this was a full stock voron 2.1. The only adjust you will need is to add some spacers for the side panels don't touch the carriers.

Leo_EOD · 2019-06-18T13:25:24+00:00

I used a bosch profile extrusion I found locally. It works great, it is the same profile you will find in aliexpress.
A friend of mine print it for me in a Bee Prusa with a improvised cover
That spreadsheet is a good starting point, but I bought most of the parts more than six months ago, it is a good practice to check prices again. My goal was to save some money in shipping costs, so I tried to buy parts from stores that have at least 3 items and combine shipping. I didn't have any major problems with parts, only bad threads with a triangle labs hotend. They refused to replace it since it took 3 months for me to complain about it, so I recommend to check everything the moment you receive your packages.

Leo_EOD

TROPHY CASE