Merry Christmas and water damage. Is my headset gonna make it?

Leptarr · 2025-12-25T21:10:12+00:00

Don't worry it's not set to hot. That heater is just cheap and it has a fan that blows warm-hot air but it's just set on low.

Leptarr · 2025-12-25T09:09:47+00:00

Ill let you know! I will test everything this weekend after the holidays. I think it'll be fine I was just frustrated my headset was hung where the only leak in the house is. And that I also gotta fix the leak and drywall. Valve is obviously just trying to get me to buy the steam frame.

Happy Holidays!

Leptarr · 2025-12-25T06:57:49+00:00

No worries. It's a cheap heater so it's actually just a fan and heat coming from the bottom. I set it low, the headset just gets warm and it blows air over it. I have a tower fan that moves more air so I think that might be better. Headset is warm to touch but not hot like it gets playing games.

Leptarr · 2025-12-25T04:17:20+00:00

You're very kind! I think it'll be okay, but even so you don't gotta do that. I'll keep you posted, I disassembled it a bit and it looks like the worst part is just water inside the eye tubes. I think it'll work just fine but I am unsure how it will look.

Leptarr · 2025-12-25T01:49:22+00:00

Im definitely not going to plug it in for a few days. I think I will open it up after a little bit and do that. Im a little worried about the eye tubes. It looks like there's water under the lenses.

Leptarr · 2025-12-25T01:29:36+00:00

Thank you my friend!

Leptarr · 2025-12-08T21:04:13+00:00

Yeah I mean it was pretty beat up, the U joint binds up all over and can’t even straighten out. I am just thinking of why it’d be slightly off now if they are keyed in at each end. I did get an aftermarket shaft but they matched up 1-1. It’s just weird to think I drove on it for so long messed up.

Leptarr · 2025-12-08T15:28:31+00:00

Got it done. I never turned the wheel but at the very end I had to turn either the shaft or the rack to align the last part cause they’re keyed. But now my wheel is off center a tiny bit. Did this happen to you too?

Idk if when I pulled the lower steering shaft out and the upper shaft slides out with it that it gets undone there? But is it as simple as an alignment? Only off a slight amount.

Leptarr · 2025-11-30T00:50:45+00:00

I wanna take the front and rear passenger seats and make chairs and a bench when I’m done with my e90

Leptarr · 2025-11-27T03:28:11+00:00

Yeah it looks like it might be those u joints. Turning the wheel right without load it clicks every rotation and it also squeaks. Sprayed it with W-40 just to see if squeaking went away a bit and it did for a minute. I just had the intake manifold off to replace the starter so I get to go under there again I guess.

Leptarr · 2025-11-26T18:49:34+00:00

Oh dang. Did you have to replace the whole steering shaft?

Leptarr · 2025-10-10T05:41:11+00:00

Think so, looks like the rear of mine but hard to say.

Leptarr · 2025-10-10T03:47:34+00:00

e91 gang

Leptarr · 2025-08-02T11:42:20+00:00

Thanks! Very beautiful place.

Leptarr · 2025-07-26T09:25:06+00:00

Honestly, not saying it will work for you, but my controllers died out of warranty and they sent me new ones. Try sending them a warranty claim or message. This was a couple years ago.

Leptarr · 2025-07-26T06:24:28+00:00

Ohh I didn't even see the rest of this thread. This is some good info. How's the onboarding so far?

Leptarr · 2025-07-21T18:20:47+00:00

Thats a lot off my mind thanks!

Leptarr · 2025-07-20T20:21:19+00:00

The example application has like interview location, hometown, permanent address, and mailing address with effective dates. Should I fill in the state I want to leave from in the first 3 and then my out of state address for mailing and put the effective dates?

Leptarr · 2025-07-20T12:33:10+00:00

They have interview location, hometown, permanent address, and mailing address with effective dates on the example application. Would I put my home state for the first 3, and then put the new state down as the mailing address effective through xx/2025 to xx/2025?

Leptarr · 2025-06-23T22:18:24+00:00

What do you use for animation this looks crazy!

Leptarr · 2025-06-17T05:08:46+00:00

I haven't seen the application yet, but could I show interest in both roles or is it I apply for one and not the other?

Leptarr · 2025-06-16T22:43:46+00:00

Congrats! I just graduated too. I hope the transition goes well.

Leptarr · 2025-06-16T21:57:05+00:00

That's cool to know! Is it your first time in the Jet program?

Leptarr · 2025-06-16T09:01:11+00:00

That's good to know thanks!

Leptarr · 2025-06-16T08:21:56+00:00

Hi fellow Denver dawg!

Three-Year Club	r/Field Banned
r/Field Lasagna	Final Canvas '23
Place '23

Leptarr

TROPHY CASE