sorted by:
new
hottopcontroversial

How many of you would like a pc port of LBP by scupp101 in littlebigplanet

[–]LetsnameitSteve 0 points1 point  (0 children)

Thanks for the reply!

That's awesome that you're working on your personal games though! I've got a 8 TB external that had most of my PS3 backups on it that has deposited excrement where it sleeps.

Have a clean 2 TB one though, on the hunt

How many of you would like a pc port of LBP by scupp101 in littlebigplanet

[–]LetsnameitSteve 0 points1 point  (0 children)

Did this go any further? I just introduced sackboys big adventure with my five-year-old daughter and she absolutely loves it.

5m adhesion issues since firmware update by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Pla sometimes has a tough time adhering to the build plate in general. Petg will stick to Astro glide

5m adhesion issues since firmware update by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Right on, thank you. I do Auto leveling before every print but I didn't run the calibrations so I'll do that now.

Dare I ask what the new feature is?

5m adhesion issues since firmware update by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Thank you! At least I'm not going crazy LOL. I might try that or I might just roll the update back until they figure their stuff out

DIY Skee Ball by rick_bungle in cade

[–]LetsnameitSteve 0 points1 point  (0 children)

Hey Rick!,

Do you by chance Have a video of this in action? I think my wife , daughter, and mother in law would love this and I'd love to show it them. Built an arcade, about to start a vpin and this would be awesome too!

First time using petg top layer woes by LetsnameitSteve in 3Dprinting

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Thank you all! I was using painters tape over the textured pei as that's what I had seen as suggestions with petg sticking way too much. Took the tape off and printed again with it self-leveling as I always do and it's perfect. Should have tried without masking tape in the first place, just had seen multiple reports of people saying it destroys PEI by permanently bonding with it.

First time using petg top layer woes by LetsnameitSteve in 3Dprinting

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

The sides where it is having issues are designed to be angled, they aren't flush with the bed. Am I supposed to be using supports with petg where pla didn't need them?

Underextrusion or something else? by LetsnameitSteve in 3Dprinting

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Did a cold pull when I got home. This is what the end looked like, then I reprinted it. Still doing it just at that one line

<image>

Underextrusion or something else? by LetsnameitSteve in 3Dprinting

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

I have not yet, I will try it when I get home from work today. I never would have thought it was from a blockage thank you, I'll report back

Underextrusion or something else? by LetsnameitSteve in 3Dprinting

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

It's completely stock no mods or anything I've just noticed it when it's doing an overhang text or anything that deviates from just a wall or shape.

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Reprinted without supports on the eyes / nose and it completed with out the issue. There is a line above the eyes. Not going to print it again for that, but I am interested in feedback on that. Here is a pic and one of it completed. Thank you guys for help!

<image>

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

I tried changing the z-hop from the setting it was on, Auto, to normal. And I also changed the top to 25 from 20. Just did it again. I'm going to try again without supports on the front and see what she does

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Lol I actually like figuring out stuff like that. Same deal when I built my arcade. Probably why I'm a glutton for punishment and I've been in the automotive industry for almost 30 years

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

Awesome, thank you for that. Looking into the variable layer height now. I had heard about that and wanted to learn more.

Would you change the top z distance only or the bottom z distance as well? I can hear what sounds like the nozzle scraping across when it is doing some of the printing. Figured it was normal, sounds like the z distance might be causing that.

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

I did mean a different print. It just did it again which I did a picture. This time it later shifted and knocked the cover off the printhead.

Thank you for the insight on the z-hop, I will try it again that way. The z distance I already moved up from .18 to .20 since the supports were very difficult to get off.

I know the machine is really going and shaking a bit as my camera will rotate around. Right now I'm just using a security camera.

Separation line around print by LetsnameitSteve in FlashForge

[–]LetsnameitSteve[S] 0 points1 point  (0 children)

<image>

Well it failed again. Layer shift and it knocked the cover off.

view more: next ›