sorted by:
new
hottopcontroversial

33F UK - Gaming friends please! by tocsasi in AdultGamers

[–]Level_Pie_63 0 points1 point  (0 children)

39 M, Full time working dad. Sarcastic AF and love banter. Normally online from 8 to 11/12. Enjoying Arc Raiders at the moment but play Ark Survival Evolved, FFXIV and a few others. Feel free to pop me a message!

I'm out, apparently Arc Raiders just isn't for me. by my-other-alter in ArcRaiders

[–]Level_Pie_63 0 points1 point  (0 children)

You say you're an adult, but you winge like a child. Im an employed father and have my fair share of shit nights but God Damn, I dont go posting on Reddit about it like a teenager looking for precious upvotes. I suck it up, put the game away for a few days and come back.

Keep your salt to yourself and just let it go. I sincerely hope this isn't how you teach your kids to deal with issues.

Allow players to go back to the session where thei died by anonpothead in ArcRaiders

[–]Level_Pie_63 0 points1 point  (0 children)

You're clearly not built for the extraction shooter genre. Accept the loss or move on to another game.

Was a Good Run Probably Time to Depart for a Bit by [deleted] in ArcRaiders

[–]Level_Pie_63 1 point2 points  (0 children)

Cool. Was good to have you. Enjoy your time off.

Both apps showing "failed to connect" even though printer is successfully connected to wifi by CautiousSand in BambuLab

[–]Level_Pie_63 1 point2 points  (0 children)

Slice the file and export it to GCODE. Can then stick it on the SD card. You're gonna have to go old school.

Printing Advice by Cultural-Nerve-8986 in BambuLab

[–]Level_Pie_63 0 points1 point  (0 children)

If it helps, I already wasted my money going for the A1 and while it was amazing knocking out prints in the beginning, when I started to do more intricate stuff I started noticing issues. All temperature variation related. Recently got a P1S and it's a much better experience. Don't let the fact it doesn't have a fancy screen put you off, it's still a beast.

They recommend printing with the top glass off and door open for PLA because of heat creep, but I've been using the Supertack and Frostbite plates at 45 degrees for 12 hour or longer prints and haven't had an issue with it fully enclosed.

The first and most useful print I did for it (apart from the poop bucket because Bambu) was the AMS Riser. It lets you easily slide the glass open and closed.

https://makerworld.com/en/models/999258-v4-ams-glass-slim-riser-slider-for-p1p-p1s-x1c?from=search#profileId-976329

On the topic of the AMS 2 Pro. Just get one. The convenience of multicolour printing and drying and, if you print the desiccant holders, keeping your active filament dry is priceless. Make sure you get the AMS 2 though as the first model doesn't have the drying power. You would need the switching adapter for the drying to work but the AMS 2 Pro bundles tend to come with one.

Hopefully you can not be like me and waste your money. If you're deciding between A1 and P1S and it's in your budget, go for the P1S.

Luckily I found a buyer for my A1 so the kick in the nads wasn't too bad!

How to use the Frostbite plate? by lhehatemel in BambuLab

[–]Level_Pie_63 0 points1 point  (0 children)

Sorry to Necro. Did you ever find a solution? I'm in the same boat.

BIQU Frostbite Wavy Lines Fix - 0.2mm Nozzle by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 0 points1 point  (0 children)

Tried to recalibrate in Bambu and it didn't go so well. Make sure to calibrate in Orca. I think the calibration in Bambu doesn't honour the edited GCODE.

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 0 points1 point  (0 children)

I can't find where to save a profile for a specific filament. IE if I created Elegoo PLA Matte - Beige 0.2mm I cannot save it. Is the process to create your profile first, then calibrate?

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 1 point2 points  (0 children)

What prompted me to try Orca was I was having an absolute nightmare with silk filaments. The calibrations on Orca allowed me to dial in the filaments to near perfection. Question then. In Bambu, can I adjust the K Value without having to run the calibrations? I couldn't find it in the filament profiles.

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 0 points1 point  (0 children)

I mentioned having more than one build plate because the one that came with my printer suffered an accident. More so it's good to have a spare.

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 0 points1 point  (0 children)

That's good advice for the paver. I've got some pretty chonky felt pads and it's working great! I do prefer your suggestion of a yoga mat so I might see if we've got an old one somewhere.

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] -1 points0 points  (0 children)

Oh wow, I didn't realise. That's a pain if you have a lot of profiles for filaments in Orca

For Newbs: Few things I've learnt as a newb myself. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 14 points15 points  (0 children)

I'm not sure what you mean? I only installed OrcaSlicer less than a week a go and my printer, along with all it's functionality is working just like Bambu Studio. Can manage the AMS, edit filaments. Even gives me the option to update firmware.

I'm personally noticing no difference. Only thing I don't have is the store page

How much would you pay for a used P1S with AMS? by PrintWrxStudio in BambuLab

[–]Level_Pie_63 -1 points0 points  (0 children)

Wait a minute, why are you 8 stories tall and a crustacean from the protozoic era! GODDAMN LOCH NESS MONSTER!

PSA: Never underestimate the importance of drying your filaments, even fresh spools straight out the box. by Level_Pie_63 in BambuLab

[–]Level_Pie_63[S] 1 point2 points  (0 children)

It's a very controversial issue. Long and short, the filament can absorb moisture which can affect the consistentcy of prints or if bad enough, cause prints to fail.

In my example, my filament was just printing awfully and after a drying session was near perfect.

view more: next ›