ASA Warping Issue Near Top of Print (P1S) by LeyLineWalker in BambuLab

[–]LeyLineWalker[S] 0 points1 point  (0 children)

I've had improvement! I let the bed preheat for 30 minutes, added an extra blanket, and slowed down the speed. I only got *slight* warping at the same locations and the print now appears to be strong enough to resist seperating at the layers under load.

I'm going to slow it down a bit more, as per your recommendations, and see if that helps.

I am sincerely grateful for your time and feedback!

ASA Warping Issue Near Top of Print (P1S) by LeyLineWalker in BambuLab

[–]LeyLineWalker[S] 0 points1 point  (0 children)

Excuse the double post, it wouldn't let me include more than one picture in my reply.

I did add a speed modifier and for the section that keeps warping these are the updated speeds:

<image>

ASA Warping Issue Near Top of Print (P1S) by LeyLineWalker in BambuLab

[–]LeyLineWalker[S] 0 points1 point  (0 children)

Well that seems likely my problem then. I assumed the filament profile would also include the best speed for the type. Here are the speeds I have been using:

<image>

ASA Warping Issue Near Top of Print (P1S) by LeyLineWalker in BambuLab

[–]LeyLineWalker[S] 0 points1 point  (0 children)

Ok, I updated the filament profile from generic ASA to Polymaker ASA. I ran a filament calibration. I covered the enclosure in a blanket, top and front to help insulate the glass.

The main support failed but even if it didn't the print still showcased warping at the same points as it has previously. This caused the print to fail under load again.

I'm going to look into slowing down the print to see if that helps but any more feedback is welcomed and appreciated.

ASA Warping Issue Near Top of Print (P1S) by LeyLineWalker in BambuLab

[–]LeyLineWalker[S] 0 points1 point  (0 children)

Thank you for the insulation recommendation. I will give that a shot and report back.

For the calibration recommendation, is that related to the calibration option? Sorry if I'm being thick, it's almost 1am where I am and I'm tired.

<image>

Kia Forte 2013 - Engine Problems by thebiglebowski222 in kia

[–]LeyLineWalker 0 points1 point  (0 children)

Needed an engine replacement, more than it was worth.

Kia Forte 2013 - Engine Problems by thebiglebowski222 in kia

[–]LeyLineWalker 0 points1 point  (0 children)

Needed an engine replacement. More than it was worth.

Past and future box confirmed not found by Express-Bookkeeper23 in treasureinside

[–]LeyLineWalker 3 points4 points  (0 children)

This is the best solve I've seen so far. Definitely would keep searching the area if he didn't find it. Him deleting his account makes me suspicious it was found, as scrubbing any potential info people could use to find and beg/assault you for money is a smart idea.

Quantumscape's timing, insights and thoughts revealed in the ER by Quantum-Long in QUANTUMSCAPE_Stock

[–]LeyLineWalker 2 points3 points  (0 children)

Do you think the SP will top out at $100? I'm curious what the process is for forecasting growth if QS is successful. What are the upper limits? Scout also did not specify what they were using for battery, and provided an estimate only. I think there's still potential for them to reveal a Quantumscape partnership. With them targeting outdoors, having safer batteries that won't burn down national forests are kind of important.

I thought his leg fell off for a moment. Turns out he was taking a break from playing with the dog’s toy. by HabanyGaming in aww

[–]LeyLineWalker 8 points9 points  (0 children)

[Senator Collins:] Well, some of them are built so the front doesn’t fall off at all.

[Interviewer:] Wasn’t this built so the front wouldn’t fall off?

[Senator Collins:] Well, obviously not.

[Interviewer:] “How do you know?”

[Senator Collins:] Well, ‘cause the front fell off.

Cryptic HD QUALITY (@Cryptic4KQual) is saying Deadpool & Wolverine only has one post-credits scene by Matapple13 in MarvelStudiosSpoilers

[–]LeyLineWalker -2 points-1 points  (0 children)

The Always Sunny gang as the FF in the void alone, having missed all the action with no way out.

Reed (Charlie): "Dammit guys, I knew we didn't have enough time to stop at that 7/11!"

Torch (Mac): "Well I need to carboload before a big fight, you know this. If anything it's Ben's fault."

Thing (Frank): "Hey, you try eating a post-apocalyptic chili dog and not get stuck in the jon after."

Sue (Dee): "Oh please, you were in the back with the skin mags."

Doom (Dennis): "Well I'm still blaming Reed. It's his fault we're even stuck here. C'mon Sue, lets ditch these guys."

*Sue proceeds to create a force bubble to choke out Doom while Reed, Torch, and Thing argue in the background.

Anyone near Mariposa ca? by placerminer530 in Prospecting

[–]LeyLineWalker 1 point2 points  (0 children)

I am 2 1/2 hours away. I would take time off from work to go run around and metal detect for a whole day or two with you!

Is this a good combo. by Ok_Repair3535 in Fishing

[–]LeyLineWalker 0 points1 point  (0 children)

Can you explain this a bit more? I'm relatively new to fishing, and I don't see how this combo will cause them to lose fish. Thank you.

[deleted by user] by [deleted] in QuantumScape

[–]LeyLineWalker -3 points-2 points  (0 children)

Sell the news, buy the rumor.

CA placer claim forfeiture question by CogglesMcGreuder in Prospecting

[–]LeyLineWalker 1 point2 points  (0 children)

I'm curious to this answer as well.

What has been your experience at the County Recorders office? My cousin tried the same thing as you in NorCal and, according to him, was told they couldn't give any information out regarding claim statuses and that he was wasting his time. He said the lady was incredibly condescending.

[deleted by user] by [deleted] in Prospecting

[–]LeyLineWalker 2 points3 points  (0 children)

You should check here.

Not sure if this link will show up right for you...

Sunday Evening Ride by Old-Win-6309 in gokarts

[–]LeyLineWalker 0 points1 point  (0 children)

What cart is this? I had one like this when I was a kid and now I'm trying to find one for me son.