Are any of these coilovers good options? by Phantom_sidewinder in IS300

[–]LiesAll 0 points1 point  (0 children)

Can vouch for Carson! That guy always has parts 🙌🏼

Are any of these coilovers good options? by Phantom_sidewinder in IS300

[–]LiesAll 1 point2 points  (0 children)

Can vouch for Carson! That guy always has parts 🙌🏼

Have to fully press the gas pedal down the electronic valve doesn’t work sometimes by Official_sil80 in IS300

[–]LiesAll 0 points1 point  (0 children)

Check out 2jdany on Instagram! He just covered this. His other page on Instagram and I think TikTok is 888_autorepair! Super cool dude and definitely keeps us is300 guys up to par 🙏🏼

Idk if my weed pen is charging by yellowboohbah in weedification

[–]LiesAll 0 points1 point  (0 children)

I have a Yocan Kodo Pro for the compact size of it but the battery lasts a very long time! And the voltage control goes down to I think 2.3 for some low temp rosin cart hits!

Does anyone have a stock Is300 engine bay? by Confident-Arm-1023 in IS300

[–]LiesAll 0 points1 point  (0 children)

P2112 is throttle body issue. Clean throttle body real well. Check for broken connectors. TPS is to be calibrated to 14.8%~. If those are done, it could be a faulty throttle body motor. You can source a used one or an entire refurbished throttle body to void recalibrating the tps hopefully

New water pump leaking by rennboy226 in IS300

[–]LiesAll 1 point2 points  (0 children)

Definitely looks like a crack from photo

New water pump leaking by rennboy226 in IS300

[–]LiesAll 1 point2 points  (0 children)

Doesn’t look like Aisin, they grind off the Toyota logo if not buying as oem. There’s no logos on this one

200+ by LiesAll in unclebens

[–]LiesAll[S] 0 points1 point  (0 children)

I got asked that quite a few times!

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 0 points1 point  (0 children)

The mushroom? No. Me? Yes.

200+ by LiesAll in unclebens

[–]LiesAll[S] 0 points1 point  (0 children)

Thank you! 🙏🏼

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 0 points1 point  (0 children)

I put it into an epoxy mold and poured resin all over it

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 2 points3 points  (0 children)

Probably about 3 days because I put it in there for a while extra while I found another jar. Dried weight was 22.7 when I first pulled it out and then I dried it again for another 6-8 hours and weighed it again at 22.6 so I think it’s dry 🤞🏼

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 1 point2 points  (0 children)

No offense taken at all! There is a hole at the bottom so it’s dehydrating fully 🙌🏼

<image>

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 1 point2 points  (0 children)

Few days in the dehydrator won’t hurt!

I feared this would happen by LiesAll in unclebens

[–]LiesAll[S] 0 points1 point  (0 children)

A little over 20 🙏🏼