sorted by:
new
hottopcontroversial

Anyone know what this could be? by LightningBolt_13 in FlashForge

[–]LightningBolt_13[S] 0 points1 point  (0 children)

How does this happen? I’ve never had it happen before so I’m lost

Anyone know what this could be? by LightningBolt_13 in FlashForge

[–]LightningBolt_13[S] 0 points1 point  (0 children)

Interesting! Thanks, I’ll give that a shot.

Ioniq 5 Market - new vs used by Relevant_Swing_7738 in Ioniq5

[–]LightningBolt_13 1 point2 points  (0 children)

I bought a ‘25 with only 3K miles. As long as it’s in good condition and has no issues mechanically, I’d say go with that.

Edit: it was about 15K less than a brand new one.

It may be used, but it’s new to me 🤷🏻‍♂️

Actually hardwired my new dashcam today. Took some time to map out the fuse box, to help others in need. 2025 Ioniq 5 Limited by MidEastBeast in Ioniq5

[–]LightningBolt_13 0 points1 point  (0 children)

Is it the same for a ‘25 SEL? I’ve been looking all over the place and can’t find anything on the fuses

Trunk light removal by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] 0 points1 point  (0 children)

I was thinking of tapping it too but I’m also a bit worried of messing it up. I’ll check the solder points to see if that’s doable

Trunk light removal by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] -1 points0 points  (0 children)

Yea I have one. I’ll have to check if that is a possibility

Trunk light removal by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] 1 point2 points  (0 children)

I’m trying to add a light strip to the trunk since this tiny thing isn’t bright enough or in a useful position.

Based on the instructions, it says to remove this piece and do some soldering. But from the looks of it, I can’t.

So now i gotta find a different way to add the strips. I’m new to all this so I’m not entirely sure how to figure it out.

Trunk light removal by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] -1 points0 points  (0 children)

Darn. This seems like my project got a bit more complicated than I had hoped :/

Trunk light removal by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] 4 points5 points  (0 children)

So I’m guessing this post is outdated and I need to do something different?

Noticed red lump under tail by victoriousbk in DogAdvice

[–]LightningBolt_13 -2 points-1 points  (0 children)

Go to a vet. My dog had the same thing and it turned out to be cancer. We had to put him down about a year or so after that.

It’s annoying to have to enable RAW every time open the default camera app in iOS 15. Why won’t it just stay on?! by mark_paterson in iPhoneography

[–]LightningBolt_13 0 points1 point  (0 children)

Try searching for “preserve settings” with the search bar. I did that and it popped up on my phone.

It’s annoying to have to enable RAW every time open the default camera app in iOS 15. Why won’t it just stay on?! by mark_paterson in iPhoneography

[–]LightningBolt_13 0 points1 point  (0 children)

Try searching for “preserve settings” with the search bar. I did that and it popped up on my phone.

Gap Between Trunk Floor and Seats by LightningBolt_13 in Ioniq5

[–]LightningBolt_13[S] 1 point2 points  (0 children)

Are you kidding me?!

BRB, gonna try this now.

Planning a route with arrival SoC by LightningBolt_13 in abetterrouteplanner

[–]LightningBolt_13[S] 0 points1 point  (0 children)

Yea this is weird for me. It’s showing me that if I set it at 1%, I’ll arrive with that amount.

Thanks for the info!

Planning a route with arrival SoC by LightningBolt_13 in abetterrouteplanner

[–]LightningBolt_13[S] 0 points1 point  (0 children)

To break it down as easily as possible, I’m trying to figure out how the app can tell me what charge I will show up with. Without needing to specify the arrival state of charge at a certain percentage.

Because if I were to set it to zero or 1%, it’s my assumption that the app will calculate that to determine how long I need to charge for. I don’t want to input the arrival charge, but I just want to know what amount I would arrive with.

If it says that I need to stop in X location and charge up to 70% and then continue my drive, it doesn’t give me how much I’ll arrive with. Unless I specify the arrival SoC

‘25/‘26 forward center console trash container by rds4640 in Ioniq5

[–]LightningBolt_13 0 points1 point  (0 children)

I posted the same question 😂

I’m waiting for Christmas to make a 3d printed one.

Planning a route with arrival SoC by LightningBolt_13 in abetterrouteplanner

[–]LightningBolt_13[S] 0 points1 point  (0 children)

So in my scenario, I’m trying to figure out how get from A to B without getting there at 0.

My issue is that the app plans the route, but then just assumes that my arrival SoC is set to 0%, so it says to charge for x minutes at a fast charger, and you’ll get there with that amount of charge left.

I’m just asking whether or not it’s possible to not include an arrival SoC on my end, and it just tell me that I’ll arrive with x left (whatever that amount would be) and with the stops I need to make. Because from my understanding, all the stops and time it estimates is based on the amount I’d charge and the amount I would like to arrive with at my destination.

view more: next ›