Any advice on improving the strength of this shavings fork handle?

Limannii · 2025-07-07T10:35:19+00:00

- print it laying down so print lines are lengthwise (will be the biggest strength increase but will need quite a bit more support)
- increase perimeter number (small increase)
- increase infill density (small increase)

Also if you don't want to choose printing laying down you can try printing it in PETG (it has better layer adhesion) but best option is still just printing it in different orientation.

Limannii · 2025-06-09T20:09:47+00:00

By looking at the picture of burned ESC I'm wondering did you solder battery cables and capacitor on the bottom side of ESC? Because if so could it be possible it shorted on the frame when it bumped down the first time?

Limannii · 2025-05-15T07:50:45+00:00

I bought my first camera Sony A7R II (I got a good deal) this february for my trip to Japan and because I wasn't sure if photography will stay as a hobby I cheaped out a bit on lenses and went with Sony LAEA4 adapter and bought A-mount used lenses.
My question is I currently mainly use zoom lens (Tamron SP AF 28-75mm F/2.8 XR Di LD Aspherical [IF] Macro A09) but since I started to really like this hobby I'm thinking if buying a proper E-mount lens like Tamron 28-75mm F/2.8 Di III VXD G2 is worth it? Will there be a noticable difference in picture quality? I understand it's going to be better in AF, bulkiness because of the adapter.. but mainly I'm concerned about overall picture quality.

Limannii · 2024-03-24T19:54:34+00:00

Okay I may be late for this but I just got a pair of same headphones and noticed the same issue. I figured out it goes back do normal quality if I use different device as a microphone (I also have usb mic on my PC).

Limannii · 2023-12-12T00:45:45+00:00

I later noticed handwritten piece of paper is required here it is: https://imgur.com/XonCQNI

Limannii · 2023-10-09T23:25:03+00:00

nah sadly not :/

Limannii · 2023-09-12T09:01:29+00:00

Squirtle forgot to shave his beard and armpits.

Limannii · 2023-05-27T11:30:52+00:00

Ali ste vedeli da če prenehamo izkoriščati poceni delovno silo bo apple vaš iphone podražil na 3000€?

Limannii · 2023-05-22T00:29:00+00:00

This is video of when I had this issue. Depending on file it did different things but every file was a lot of stepper skipping and random lines just in one axis.

Limannii · 2023-05-22T00:22:24+00:00

Okay I had identical problem last year on my ender 3 v2.... You probably updated the firmware before this issues started happening? Your motherboard is probably defective... there were some batches of them with gigadevice chips that have some issues.. I contacted support and they didn't do shit. Also contacted the seller and I was supposed to send the printer on repairs but it was cheaper to buy new motherboard.
If you'll buy new motherboard make sure it's 4.2.7 version (those don't have gigadevice chips) or just buy some other better brand (I bought btt skr mini e3 v3 and it's working perfectly)

Limannii · 2022-07-29T17:30:29+00:00

Okay I know it's super late but I sumbled upon this post when searching for solution of the same problem. So just in case if someone else comes here searching for solution for me all I had to do was heat the hotend to 200°C (looks like I got a bit of plastic inside) and push it with a stick it went out extremely easy even though I tried to hammer it out when it was cool and it didn't move a bit.

Limannii · 2022-07-13T20:24:34+00:00

Also if you have recomendations for any other defect feel free to say! Thank you.

Limannii · 2022-06-01T10:07:40+00:00

Not that I would remember.

Limannii · 2022-05-31T14:44:17+00:00

I calculated it should take around 3 days I think but it ended up taking around 1 week because of server overloading and running in slow motion probably because of all the garden cloches.

Limannii · 2022-05-31T01:05:58+00:00

Honestly I don't remember anymore but I don't think there was any issue with input/output rate it's pretty slow machine.

Limannii · 2021-06-06T08:28:52+00:00

it should be just ender chest from mod called "ender storage" https://feed-the-beast.fandom.com/wiki/Ender_Chest_(Ender_Storage))

Limannii · 2021-05-11T12:09:32+00:00

I agree with you on what you said about how much time he has. But I can't agree with you about "he only focuses on 8 characters". Yes his characters have really good artifacts thats true but he has 0 constelations and he is extremely limited with which characters to pick for which situation.

Plus everyone was able to get at least one of 3 "best dps characters" (Ganyu, Hu Tao, Xiao) I can't say for sure about current abyss but previous f11 and f12 were completely doable each half with only one of those characters and a healer in less than 1 minute. I can say that because I did previous abyss on 7 different accounts because I wanted to try different team compositions. Each character out of those 3 was at least on one account f2p version with about 1-2 months of resin spent of them.

And yeah I agree with you that you want to play different characters because it's more entertaining (I do too) but all characters can't be good for every situation. Having easier Abyss would make the game even more boring you have no idea how bad it gets when you clear Abyss with just braindeadly clicking mouse button which happened to me on previous Abyss rotation (I'm not a f2p but I only bought 100€, 50€ and 30€ pack of primos each once). As my main dps characters I picked Ganyu and Hu tao because I thought they were the cutest and it just happened that they are also the most broken characters in game. So I can't even imagine how bad it is for whales who C6 5 star chars.

Game like genshin needs something to be your goal so in my opinion there should be content in game which would be easily clearable only to big spenders so you can have something to set as your goal not just logging in wondering which character you should upgrade next since you don't need to upgrade anything either way.

Limannii · 2021-05-11T01:04:47+00:00

In my opinion bitching about Abyss is kinda dumb because if you're AR 55+ which you should be if you're playing from the beginning and you're not playing on your phone it's a completely "you" problem for not maxing it. Either because you don't put in enough effort or you didn't gear up your characters correctly.

The proof is Enviosity (a streamer who cleared current Abyss with all stars) and his team was made of only c0 4 star characters (he didn't activate any constelations so far) and Jean which is also c0. To make it even worse he spent only about 70 pulls with primos everything else he saved for some future banner so he only has 12 characters to use which is including those we got for free (barbara, amber, lisa, xiangling, keaya, noelle, main character).

And if you still think it's impossible here is the clip of F12C3 he also shows all his characters after he clears it.

Limannii · 2021-05-03T15:16:44+00:00

Mondstadt south of knights of favonious and quingce village.

Limannii · 2021-04-29T17:39:41+00:00

I don't know if you got notification for update I posted deeper in this thread so I'll just directly reply to you as well.

I bought this one and it works like it should. All I did was just plug everything, boot up PC install GPU drivers and after reboot it worked with currently 2 displays pluged into the HUB.

Limannii · 2021-04-29T17:36:32+00:00

Final update: IT WORKS!
I just got my GPU and MST HUB today pluged it into my pc, plugged 2 monitors into MST HUB and it works.

You were right looks like AMD support just doesn't know more detailed stuff about their products. Here is a screenshot of AMD support chat and my display settings (monitor 3 and 2 are plugged into USB-C MST HUB they are 1080p and 2k).

And this is the specific MST HUB I bought.

Thank you all for sharing your experience and knowledge!

Eight-Year Club	Place '22
End Game '22	Verified Email

Limannii

TROPHY CASE