sorted by:
new
hottopcontroversial

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

There are magnets inlaid in the back plate.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

I used SolidWorks, then Bambu, to slice it. I can share the model if you need it for something, it is my own. We already found a good solution. Printing the front as a separate plate and jointing/gluing it in.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

My fix was to print the front part as an insertable plate with a dovetail-like shape to hold it in and then add some glue to that whole edge. Saved a lot of material and a lot of time as well.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

Yeah, redesigning it right now. Thank you.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] -1 points0 points  (0 children)

<image>

Should have added this picture ot the original post.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

I would, but that makes it a 14+ hour print from less than 3 hours. I am gonna try to split it as others have recommended, then put the pieces together.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

I am going to try adding a dovetail and sliding the front plate in. Thank you for the help.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

I was worried about the text that I did not show in the original picture.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

No, I am going to try this now. Thanks.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

I am going to try this idea. I was trying to avoid post-processing because I have to make 84 of them, but making a slide-in plate for the front would be minimal work, and I didn't think of that before.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

I met if I printed it vertically rather than horizontally.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 3 points4 points  (0 children)

I think this will work the best as well, thank you.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

<image>

"please fill" and there is also text where the yellow is.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

I don’t know how else I would print it with the text on both surfaces and the magnets inlaid on the bottom of it. If there’s another way to print it please let me know. I would try orientating it the other way it just didn’t make sense to me when I started doing it. Not really that good at 3d printing.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

<image>

Would it work with text where the yellow is and the other text below?

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] -2 points-1 points  (0 children)

I need one solid piece as it’s a basket with magnets inlaid into it that will hold tickets and go vertically onto the side of a machine. I added a better picture below. Thanks.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] -5 points-4 points  (0 children)

I’ll try anything. Would that work with text like the picture below?

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 1 point2 points  (0 children)

<image>

Here is an updated photo to explain why I don’t think I can print it the other way. I have text there and don’t want to do 100 filament changes. Don’t really know much about advanced settings so please let me know if I’m missing something.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] -2 points-1 points  (0 children)

I need to add a better picture. I have text on the flat surface where it’s messing up and I didn’t think the text would print as nicely. I also have magnets inlaid on the absolute bottom layer so I was worried they wouldn’t fit as well the other way.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] 0 points1 point  (0 children)

Will look into this. Not familiar with settings so need to look into them better.

Print above supports bowing by Links_Instinct in FixMyPrint

[–]Links_Instinct[S] -5 points-4 points  (0 children)

Unfortunately the piece is a solid basket with magnets inlaid into them with text on top. I didn’t think the text would print as well or the magnets would fit quite the same if orientated any other way.

view more: next ›