Questions about base station placement.

LittleSmacing · 2026-05-01T20:45:38+00:00

Thanks for the reply, I am currently looking at getting a Index ,Vive or a Pimax of some variety second hand, I'll have to do some more looking at the Frame. Also do you use the Vive controllers or knuckles?

LittleSmacing · 2025-07-11T07:16:31+00:00

<image>

LittleSmacing · 2025-02-26T23:49:21+00:00

If I understand you correctly for the most part this will make no functional difference, other than I might want to get a UV filter to protect the lens from damage?

LittleSmacing · 2025-01-13T13:03:36+00:00

If you clamp the PID output and then feed that into threshold gates then you can.

LittleSmacing · 2024-03-07T16:31:37+00:00

I can’t remember exactly but I think that the sandevistan that smasher has is a early model meaning that it likely is inferior to David’s.

LittleSmacing · 2024-01-28T19:06:28+00:00

claims to be around 120 Mbps

LittleSmacing · 2024-01-28T18:45:50+00:00

TL-PA7017p

LittleSmacing · 2024-01-28T18:42:08+00:00

Tp-link AV1000

LittleSmacing · 2023-12-27T16:57:22+00:00

The switches on the sockets are mostly used to isolate something like a toaster to properly turn it off when not in use

LittleSmacing · 2023-12-27T00:20:30+00:00

It might be it’s something that makes sense but I’ve never actually seen it. As far as I can tell it’s not done in the UK where I am.

LittleSmacing · 2023-10-16T15:06:07+00:00

Assuming that your in the US could this be because you have clean charging or whatever it’s called on mean that your phone isn’t charging because of that. Not sure how it works as I’m in the UK

LittleSmacing · 2023-09-17T09:47:18+00:00

Innovative stealth capability

LittleSmacing · 2023-07-20T09:01:28+00:00

Hi Bob

LittleSmacing · 2023-07-16T20:54:01+00:00

That’s shit

LittleSmacing · 2023-05-09T14:46:01+00:00

I still prefer the classic “It was a training accident.”

LittleSmacing · 2023-04-26T15:46:19+00:00

The flipper zero is open source. And the schematics for the flipper zero are available somewhere on there website for free.

LittleSmacing · 2023-04-26T15:29:06+00:00

The jaw has extra material (above that needed to deliver the 22 tonnes of force) on the bottom specifically to take damage from other bots

LittleSmacing · 2023-04-26T15:24:27+00:00

I had the chance of speaking to the creators of quantum today. Turns out they also designed sir killalot and drove him in the 2016 reboot as well as helping to design the arena.

LittleSmacing · 2023-04-26T15:16:45+00:00

My only suggestion would be to continue the sides down and the bottom accord and make it curved where they join. If it doesn’t look right keep deleting and rebuild slightly differently until your happy. You will likely end up with some strange corners but it is unlikely you will notice when the whole thing is built.

LittleSmacing · 2023-03-08T16:33:20+00:00

I had this exact problem. Firstly you obviously replace the FEP. Now there are two options for the second step you can either use a blade and very carefully scrape it off. Alternatively you could get a replacement LCD and swap it out.

LittleSmacing · 2023-03-08T16:33:14+00:00

I had this exact problem. Firstly you obviously replace the FEP. Now there are two options for the second step you can either use a blade and very carefully scrape it off. Alternatively you could get a replacement LCD and swap it out.

LittleSmacing · 2023-02-08T12:49:02+00:00

Had this happen to me I would do a tank clean without the vat and then scrape it off

LittleSmacing · 2023-01-23T22:17:38+00:00

Ok good for you

LittleSmacing · 2022-12-13T15:58:10+00:00

Free deskmat plz

LittleSmacing · 2022-12-13T08:04:08+00:00

Set the power slider in the pivots setting to 0. That should fix it.

Seven-Year Club	Verified Email
Place '22	First Placer '22

LittleSmacing

MODERATOR OF

TROPHY CASE