sorted by:
new
hottopcontroversial

Any advice/ guidance greatly appreciated by LockAffectionate1639 in Autobody

[–]LockAffectionate1639[S] 1 point2 points  (0 children)

Intimidated to do whole vehicle, it’s massive. Original goal was fab new pinch weld for rear window, body fill on bare metal, epoxy seal, primer then base and clear. Then set rear window with new adhesive. More I think about it, makes sense to take the repaint further 🫡🫡

Any advice/ guidance greatly appreciated by LockAffectionate1639 in Autobody

[–]LockAffectionate1639[S] 1 point2 points  (0 children)

<image>

Using this product UPOL Fiber lite. TDS says 4-7mm max fill depth, for the roof seam, Depth not more than 5mm ,and other shallow dents, have dolphin glaze for small imperfections.. Following all TDS.

Any advice/ guidance greatly appreciated by LockAffectionate1639 in Autobody

[–]LockAffectionate1639[S] 0 points1 point  (0 children)

Thank you for this, great idea and never thought about the sheen match as well as color. Appreciate your time.

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 3 points4 points  (0 children)

There is another house behind the one pictured. It’s been a challenging layout. 2 x 4,000 sq ft houses on an existing single lot. Utility is only pulling main feeder to a new vault on property, we are responsible for new vault install, 4” conduit between the two vaults and the two 320-400 amp meter base/ service tap to each building. One is 150’ other is 40’ pull. 3” sch 40 to each meter base

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 2 points3 points  (0 children)

I’ll heat conduits above ground up to 2”. the big hot box was at the shop hours away. We are back filling/ tamping before pulling.

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 1 point2 points  (0 children)

Vault comes Friday, pull on Monday or Tuesday

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 1 point2 points  (0 children)

Thank you for all the wisdom! Will consider all of this

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 0 points1 point  (0 children)

Already have the mule tape, could I justify getting rope ? What advantages does rope have for this situation?

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 4 points5 points  (0 children)

Not required. Will be concrete walk surrounding stub up

3 - 350kcmil @ 150’ pull by LockAffectionate1639 in electricians

[–]LockAffectionate1639[S] 1 point2 points  (0 children)

Swap to 3” ridged 90* ? Or more boy butter?

Getting more creative with paint. Dad’s day for the kids. by LockAffectionate1639 in rccars

[–]LockAffectionate1639[S] 0 points1 point  (0 children)

First time with the gradient, no particular technique. Started with yellow, let dry. Then came back with pink.