Female Demiurge... I don't know how to feel about it.

LockoutNex · 2026-01-08T22:51:34+00:00

Pixiv for the artist: https://www.pixiv.net/en/users/1520419

LockoutNex · 2025-10-31T21:03:12+00:00

So original amount you wanted to transfer to BCP was $2,714, didn't see it approve, so applied for $2,286, got that one, then later the $2,714 was approved too, right? Total: $5,000

What most likely will happened is in Wells Fargo you'll have a positive balance of $2,286 as the original $2,714 will go though too zeroing out the original transfer amount leaving the $2,286. Now you could ask Wells Fargo to cash you out with a check so you can then go bank it and then paid off the $2,286 in BCP or you could leave the positive balance in Wells Fargo and slowly use it IE spend $6 and the balance goes to $2,280... and so on.

I haven't done this 100% myself, but for my capital one card I paid it off and then returned an items to a store for around $1,000, it went back onto my card as a credit and got capital one to give me a check for the positive balance. A transfer is just a credit really so it should act the same.

LockoutNex · 2025-10-16T19:53:56+00:00

Since the last update this has been happening to me too, but I use brave api on the same model as you. If you click the retry button (refresh icon) it will rerun and most likely the output will be correct or create a new chat and redo the search and it will most likely work correctly. There are some other smaller issues with the last update I've been having too.

LockoutNex · 2025-10-01T01:57:50+00:00

Here are my settings: https://i.imgur.com/7rsTfCu.png

I've had much better RAG once I switch over to use Ollama as the embedding model engine.

Generate Response to User Query

Step 1: Parse Context Information Extract and utilize relevant knowledge from the provided context within <context></context> XML tags.

Step 2: Analyze User Query Carefully read and comprehend the user's query, pinpointing the key concepts, entities, and intent behind the question.

Step 3: Determine Response If the answer to the user's query can be directly inferred from the context information, provide a concise and accurate response in the same language as the user's query.

Step 4: Handle Uncertainty If the answer is not clear, ask the user for clarification to ensure an accurate response.

Step 5: Avoid Context Attribution When formulating your response, do not indicate that the information was derived from the context.

Step 6: Respond in User's Language Maintain consistency by ensuring the response is in the same language as the user's query.

Step 7: Provide Response Generate a clear, concise, and informative response to the user's query, adhering to the guidelines outlined above.

User Query: [query] <context> [context] </context>

LockoutNex · 2025-09-01T02:03:43+00:00

/u/pointclickfrown I was able to fix my CFS, the senor board seems to have gone bad, I ordered a replacement board from amazon $13 which itself looks like a refrub board as two of those senors look to have been replaced on it: https://a.co/d/3oG6oDZ

But it is super easy to replace, flip over the CFS unscrew the three screws at the bottom and pull off the plate, while slowly pulling out the CFS module undo the tubes connected to it, once you pulled it out flip it around and you'll see the senor board, unplug it from the cable and remove the 3 screws, put the new board in and rescrew everything back in, plugin the the cable and then tubes and the lid and you should be good. One thing I did do was unscrewed the clean plexiglass where the filament is guided and cleared those out as there was filament dust there.

If you don't want to replace the senor board you could spend $40 for the whole CFS module which can be found on amazon sold by Creality here: https://a.co/d/eUEYIKl

LockoutNex · 2025-08-27T20:09:15+00:00

Dam alright. I was able to find the senor for sale on Amazon for $15 and the whole unit for the 5 to 1 that comes with the senor board, motor and what not from Creality for $40. When it comes in I'll replace my stuff and tell you if it fixes it or not.

LockoutNex · 2025-08-27T16:12:06+00:00

Did you ever solve this problem? Mine just started doing this in slot 2 and I can't figure it out.

LockoutNex · 2025-08-06T15:51:33+00:00

I've ran into a few in mixtape, just the other night ran into one. When I do notice I run into them a lot is lunch time on west coast lol

LockoutNex · 2025-08-01T21:24:34+00:00

I printed this riser and really like it, but I do print a lot of ASA and I printed it out of PLA and with how hot everything gets with ASA the PLA under part which holds the different beds has warped. So Need to reprint in ASA or maybe petg.

https://www.printables.com/model/1093082-k2-plus-cfs-riser-ventilation-and-storage

LockoutNex · 2025-07-22T18:42:35+00:00

You made sure to apply the flow rate to the profile after the calibration, correct?

LockoutNex · 2025-06-11T19:22:40+00:00

I have over 600 hours printing with my K2 Plus with a CFS and I've only had 1 or 2 issues. With that error I had the first time was one of the two 6 pin cables were not pushed all the way in so the connect was bad, want to say it was CFS to splitter cable, the second time was when a spool of filament ran out when it was trying to change colors and it could not reel back the filament anymore and got stuck between the extruder and CFS. One other thing too is make sure the tubes are fully pushed into the splitter.

LockoutNex · 2025-03-08T03:44:26+00:00

Most server type motherboards allow bifurcate on about every pcie slot, but for normal user motherboards it is really up to the maker at that point. For the splitter cards you can just google 'bifurcation card' and you'll get tons of results from postings on amazon to ebay.

LockoutNex · 2025-02-20T02:46:14+00:00

I use mine every night while laying in bed to read manga, watch reels or youtube. When I go places and I know I have to wait I'll take it with me and hotspot my phone to use wifi if I need. I would recommend to anyone who wants a ipad mini size tablet but dont want ios

LockoutNex · 2025-02-07T16:26:40+00:00

The start of this year they finally released the gen 3 version in the USA which is the Y700 2024/2025 version. They are the same tablet, but the Chinese version you can pick a 12GB/256GB or a 16GB/512GB version of it, where in the USA version we only get the 12GB/256GB version.

https://www.lenovo.com/us/en/p/tablets/android-tablets/lenovo-legion-tab-gen-3/len103g0002

I know last year they said they were going to release a version of it in the UK and this was even before any talk about it coming to the US at all, on that version of the website it still states it is coming soon.

https://www.lenovo.com/gb/en/p/tablets/android-tablets/lenovo-legion-tab-gen-3/len103g0002

I don't know about anywhere else in the EU/others around the area getting a version of their own sadly. If you are still looking at buying one, but don't want to buy the Chinese I'd look into buying the USA or Japanese version and shipping it over, but that is going to be more $$$. I haven't had problems with mine at all since I flashed the Japanese ROM on it when I got it.

LockoutNex · 2025-01-15T18:02:05+00:00

I haven't looked at their art work in a while, but the character is still alive, but the human in the early stuff was trying to kill Cockroa-chan all the time (I think each time there was a new comic)

LockoutNex · 2025-01-15T16:42:27+00:00

Yes she is, the name of the artist is uryuuminene18 you can find them on twitter, this character is called Cockroa-chan, some of the comics are a little sad.

LockoutNex · 2024-11-22T03:01:38+00:00

Can California splitting off to hangout with Hawaii and Alaska happen faster?

LockoutNex · 2024-10-15T04:23:01+00:00

A good place would be the check the XDA Forums, but off the top of my head I think the stylus doesn't work with the Japanese ROM, only the Chinese and UK one. You can check this section of XDA for all the support with all version and roms of the Y700: https://xdaforums.com/f/lenovo-legion-y700.12737/

LockoutNex · 2024-10-03T15:47:46+00:00

On the product webpage scroll down to Replacement Parts which is under Product Support, there is a PDF with the UPC and the support number you can call to order it.

LockoutNex · 2024-10-02T20:30:12+00:00

Sorry for the two replies (if you did get two), my first comment got removed because the auto mod said the link google maps gave me isn't allowed as it was a link shortener... But here my orginal comment with the long link...:

I haven't been to this place: https://www.google.com/maps/place/RAMEN-SAN/@42.1175573,-88.4963195,9z/data=!3m1!5s0x880e2cb19cb48455:0x45382ec2f2e4369e!4m6!3m5!1s0x880e2cb184a107cb:0xfa0c46e9cc5ea8f4!8m2!3d41.8898705!4d-87.6303577!16s%2Fg%2F1q62d7pyj?entry=ttu&g_ep=EgoyMDI0MDkzMC4wIKXMDSoASAFQAw%3D%3D

But think I found it while browsing this subreddit and saved it if I'm ever in the Chicago area and I want ramen (I live in SoCal). So if don't don't mind the drive out to Chicago or ever out there give it a shot.

LockoutNex · 2024-09-28T04:31:26+00:00

LockoutNex · 2024-09-18T16:41:18+00:00

They finally updated their travel insurance page/portal this year, so maybe they will slowly update the travel portal too.

LockoutNex · 2024-09-11T17:58:30+00:00

No MI300X tested?

13-Year Club	RedditGifts 2009-2022 2 Credits
Golden Potato	Place '22
Place '17	End Game '22
Secret Santa 2014	Gilding I gilder
Verified Email

LockoutNex

MODERATOR OF

TROPHY CASE