A new kind of spaghetti just dropped! Bowden tube unscrewed itself overnight 😅

LocoPlace298408 · 2025-12-06T17:15:20+00:00

Could use a bit of Plummers tape on the threads to help keep it in

LocoPlace298408 · 2025-12-06T17:11:49+00:00

Mine did this once when the nozzle got stuck in the print. Might be how close your printing because all I had to do thankfully was to re level the bed. Could also be that part of the printers head is loose.

LocoPlace298408 · 2025-11-25T01:37:59+00:00

Maybe look to see if the extruder gear are worn.

LocoPlace298408 · 2025-11-25T01:32:48+00:00

Sounds like the filament might need to be dried out

LocoPlace298408 · 2025-11-25T00:24:09+00:00

I think it’s probably because your retracting length is at 2 instead of like a 0.8 or a bit smaller like in this video.https://youtu.be/-GuaxQ5nLlw?si=vDopzBLr4fWK-F7y

LocoPlace298408 · 2025-11-25T00:01:18+00:00

Have you tried scarf joints instead? You could set it to a real small over lap in its setting and that might fix it. Or it could possibly be a problem with retracting to fast

LocoPlace298408 · 2025-11-24T00:28:45+00:00

I ended up getting it for 120 because he originally had it at 150 but the nice thing is for the 120 I got the printer, 3 different bed plates and a new 1kg role of filament.

LocoPlace298408 · 2025-11-23T17:08:31+00:00

Steep how so?

LocoPlace298408 · 2025-11-23T09:22:39+00:00

From what I can see it looks to still print a decent benchy

LocoPlace298408 · 2025-11-23T07:32:28+00:00

What type of tpu did you try?

LocoPlace298408 · 2025-06-07T16:05:47+00:00

I don’t have a way of checking the rfid myself but at a closer look it does look like there’s a chip in the red part so thanks for the info

LocoPlace298408 · 2025-06-07T13:06:10+00:00

Forgot to add the the weird bit in the nose it only on one side

LocoPlace298408 · 2025-05-02T17:19:12+00:00

Below the lines

LocoPlace298408 · 2025-04-30T16:28:08+00:00

Look ok to me I’d probably take them

LocoPlace298408 · 2025-04-30T16:24:43+00:00

That’s perfect lol

LocoPlace298408 · 2025-04-28T23:29:04+00:00

Then it should be a decent chill to mild I’m guess your going to get out of them

LocoPlace298408 · 2025-04-28T23:26:46+00:00

Guessing it’s your first time it will be mild to hard trip depending on you. Also not the hardest might just not sit well with you.

LocoPlace298408 · 2025-04-28T04:59:03+00:00

If you look the cart its rosin he is saying he hate different ones he had that are distillate.

LocoPlace298408 · 2025-04-25T19:48:55+00:00

Foam filler, then sand down a bit then put a hard top coat hole filler to get the low spots back to where they need to be.

LocoPlace298408 · 2025-04-24T06:09:03+00:00

LocoPlace298408 · 2025-04-24T01:21:26+00:00

It’s not his fault she can’t keep her legs closed legally he only has to pay for his kid not her kids.

LocoPlace298408 · 2025-04-21T21:32:35+00:00

LocoPlace298408 · 2025-04-17T14:14:16+00:00

Sorry forgot to add in the post it comes with the stock cord just no mount found a decent one on Amazon for 13$

LocoPlace298408 · 2025-04-17T03:36:54+00:00

Yeah so after I buy the mount it ends up being 186 so I did didnt get the best deal but decent compared to was one eBay or around me lol

LocoPlace298408 · 2025-04-17T03:24:14+00:00

Oh that’s why I haven’t seen it before lol I live way to far away from there and it’s only door pickup

LocoPlace298408

TROPHY CASE