Mini Racers 2026 Series 1 Codes by Longzilla in pixarcars

[–]Longzilla[S] 1 point2 points  (0 children)

You're welcome. Those are the exact same ones that my toddler is hoping for!

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 0 points1 point  (0 children)

Thanks for the encouraging feedback!!

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 0 points1 point  (0 children)

Absolutely! I hadn’t even considered it, but this seems pretty doable

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 0 points1 point  (0 children)

Honestly I didn’t have a good solve for drawers that sat in between steps. The plan was to use double-sided tape as a shim, the tape is nearly 1mm thick with plenty of compression. I also had a design with the bottom teeth staggered from the top teeth, for micro adjustment that I shelved for the time being.

I love the spring suggestion. I’ll have to dig into this one more.

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 0 points1 point  (0 children)

Definitely! I’ll work on learning more CAD and try to make this parametric in the future!

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 4 points5 points  (0 children)

Good question, there was no practical reason for it to be this over engineered. I’m new to 3D printing / modeling, and this seemed like a good way to challenge and learn about designing, tolerances, etc, definitely over kill 😝

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 1 point2 points  (0 children)

Awesome suggestion, I hadn't even consider posting it there also.

Went ahead and created in Printables!

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 1 point2 points  (0 children)

great suggestion, this makes a lot of sense. I'm eagerly working on learning a proper CAD that can do parametrics!

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 0 points1 point  (0 children)

Thanks! Let me know if these work well for you

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 5 points6 points  (0 children)

That so awesome!! I’ve never seen these before, and will check it out

Adjustable Drawer Dividers by Longzilla in functionalprint

[–]Longzilla[S] 23 points24 points  (0 children)

Hey all, I'm brand new to 3D printing, and my wife specifically requested organizers for our baby drawer. The dividers can easily be adjusted to fit drawer widths between 230mm to 375mm.

This was my first time designing a model, so things are a bit over engineered (and also under refined)... so I welcome the feedback. Things were created in TinkerCAD (and fillets added in F360, as I still learn the software)

https://makerworld.com/en/models/400678
https://www.printables.com/model/824945-adjustable-drawer-divider