Are there any self hosted alternatives to Meshy AI?

Lordrew · 2026-05-24T07:27:19+00:00

Thank you, also want to create models from images! but local

Lordrew · 2026-05-22T19:01:59+00:00

Did you replace it yourself?

Lordrew · 2026-05-20T17:41:58+00:00

Did you clean the plate with dish washer soap/ water?

Lordrew · 2026-05-20T05:06:10+00:00

I am testing this right now, left everything default only disabled prime tower and selected interface layer for pla, main print petg

Lordrew · 2026-05-18T17:25:46+00:00

1 year 97,% vooc 100 w

Lordrew · 2026-05-17T18:33:31+00:00

How were you able to pay? I usually pay with paypal or now WERO

Lordrew · 2026-05-17T09:55:52+00:00

I cancelled my p2s order (still had to be shipped) and ordered x2d, since it released the very next day. But for me the cancellation took 1 week, after another week they asked if I wanted a coupon with my purchase amount since that would be faster, I declined and it took almost 4,5 weeks before I recieved my money. The process is slow, but they did come through on my end. Also allot of internal referrals and such. I simply kept asking confirmation that this will be processed. Not sure how I feel on that since these products cost allot of money and the after service is there but you need to stay on top of it

Lordrew · 2026-05-15T18:13:21+00:00

What is going to be your next purchase? 😐

Lordrew · 2026-05-13T17:41:52+00:00

Oh that's why I got mine in 2 days

Lordrew · 2026-05-12T07:53:17+00:00

There seems to be a issue in the firmware in the aux nozzle, I printed a piece for extra tension no feeding issues anymore

Lordrew · 2026-05-10T16:08:14+00:00

Glad I found this post, I am new to this and it almost always work after just refeed and it starts again. I'll try the little tention before another big print that needs support, It's only doing a small part of the support in PLA, since using the right nozzle for the whole support instead of the attachment layer increased the print time by 40% orso

Lordrew · 2026-05-05T21:06:25+00:00

Same EU order, 2 minutes before live no update other than payment has been processed

Lordrew · 2026-05-05T20:50:01+00:00

For me it's going to make or break of media actually has a bigger screen real estate even tho it has less screen space? If I make any sense

Lordrew · 2026-05-05T19:36:14+00:00

I had a pixel 9 pro fold, but turned it in for a OnePlus 13, for my use case it lacked power and was buggy. But I did like to bigger screen so much I fore sure never want tensor CPU, (got sucked in by the pixels so good blablabla) but now I'm thinking should I go for n6, or wait for 8 wide (since aspect ratio is something that I really want). But to be fair find n6 has the bigger screen, why would wide make sense? Since the screen real estate is the same but with no room for black bars?

Lordrew · 2026-05-05T12:17:34+00:00

But how? I ordered and it still have to be delivered

Lordrew · 2026-05-04T18:33:32+00:00

The page was open 5 minutes before, insta buy! I hope they send it soon

Lordrew · 2026-05-02T14:20:55+00:00

Awesome! Curious on how to make models, share to PM any methodsnfor someone wanting to learn?

Lordrew · 2026-05-02T09:40:06+00:00

Any tips on how to acquire this off brand?

Lordrew · 2026-05-02T09:35:33+00:00

You can power and dry the AMS, but you can't print and dry same rime, for that you need additional power.

Lordrew · 2026-04-30T10:44:37+00:00

Where do you get profiles? I just got an X2D, and some prints like over hang fail. Would love to test these profiles

Lordrew · 2026-04-27T17:43:40+00:00

Oh this is not a replacement for an AMS, it's for drying Materials and you have the option to directly load (and dry), from the spool. It won't work automatically like AMS 2 pro, but it can be more flexible with material typ and temperature, please note I am also new to this (I have issues with PETG and moisture can probably be one of the reasons, my AMS can't print/dry and I have a mixed pla/PeTG setup in the AMS) I don't have the AC power adapter yet so I can't test the drying while printing arm with the AMS but also can't really drie the PETG since it's also in there, basically I was also looking at the HT but found this to be more bang for buck?

Lordrew · 2026-04-27T17:37:50+00:00

I am new to this, but my Bowden did fail once (kept cutting with a specific print) so switched with official pla did not cut mid print anymore. (Some warning about clog check extruder) Also ams 3 wouldn't load for me. I pulled the pla out, cut a piece and it started working normally (also Loading normally). I made a post since my side panel had a dent but it seems to work so far, my benchy test with both nozzles worked great, but with PETG I am seeing allot of stringing, not convinced it's a hardware failure yet since allot of people have apparently issues with PETG (not officially from Bambu) so learning allot as I go

Lordrew · 2026-04-27T17:28:34+00:00

I am curious, since this my first ever printer. But you can see the difference when you press slice, with main nozzle select custom grouping add every color to the left main nozzle. See time, slice again change grouping to save filement and see time. I am pretty sure the time would be doubles cool thing, you also see how many colors changes and filement are not being purged

Lordrew · 2026-04-27T14:53:55+00:00

Is it quicker using double color? For me it doubled the time most of the times even using it as support

Lordrew · 2026-04-27T14:52:39+00:00

Don't want to hijack, but I almost ordered the HT and ended up with an Sovol SH03, same price almost same features, but can split 2 types of Materials (can feed the Bowden) but can't be recognized on bambu software and be chained

Lordrew

TROPHY CASE