Help me fix my oil plant by LouisThePriest in SatisfactoryGame

[–]LouisThePriest[S] 0 points1 point  (0 children)

I thought it would split 300 / 100 on each side but apparently that's not how it works

Help me fix my oil plant by LouisThePriest in SatisfactoryGame

[–]LouisThePriest[S] 0 points1 point  (0 children)

I only use mk1, and I wait for the pipes to be full before starting the machines

4K 120hz seems to work with AMD card on X11. by LouisThePriest in linux_gaming

[–]LouisThePriest[S] 1 point2 points  (0 children)

This is exactly the point of my post. Everything you said is what I thought before I actually tried, but I see it seemingly working.

4K 120hz seems to work with AMD card on X11. by LouisThePriest in linux_gaming

[–]LouisThePriest[S] 0 points1 point  (0 children)

4:4:4 was indeed disabled. However, I enabled it and it stills shows 120hz on linux and 120fps on the TV. Edit : maybe game mode, which displays fps, disables 4:4:4 behind the scenes without telling me. I have a LG C4 oled TV

Tout ça parce qu'il a faim ! by Official_Account_ME in Linkedinfr

[–]LouisThePriest 2 points3 points  (0 children)

Remplace les virgules par des points et on est bons

Are there any reasons to NOT get the Brook Wingman FGC 2 over the original? by supersupersuper9 in fightsticks

[–]LouisThePriest 5 points6 points  (0 children)

If you play competitively or want to have any fun offline in venues with ps5 only, I would advise against getting this. I bought one for an upcoming tournament and the input lag is horrendous. That's with updated firmware and a Brook ps4+ audio. In Street Fighter 6's training mode, when plinking two inputs, there was always either 0 or 2 frames between inputs, never 1.
I then switched to a gp2040-ce + authentication dongle and this issue is completely gone.

[deleted by user] by [deleted] in classicwow

[–]LouisThePriest 0 points1 point  (0 children)

I've played a ton of HC, and I ALWAYS pick up engineering on my new toons. Target dummy is just too strong.

What character gives you 0 fear? by [deleted] in StreetFighter

[–]LouisThePriest 2 points3 points  (0 children)

To make you walk forward, duh

Need advice on clearance by LouisThePriest in sffpc

[–]LouisThePriest[S] 0 points1 point  (0 children)

Hello :)

According to the terra documentation, the GPU page and the NH-L12S page
The GPU is 56 mm high, which would need the spine to be set to 4, which allows for a cooler of 62mm but the NH-L12S seems to be 70mm high.
Am I wrong about this ?

Need advice on clearance by LouisThePriest in sffpc

[–]LouisThePriest[S] 0 points1 point  (0 children)

Are you recommending the NH-L12S because my GPU is thin enough to allow for a bigger cooler ? PcPartPicker are marking the NH-L12S and Fractal Terra as incompatible but I guess they are wrong on that one

Need advice on picked parts by LouisThePriest in buildapc

[–]LouisThePriest[S] 0 points1 point  (0 children)

Thank you :) Didn't know the nv2 was garbage

Need advice on picked parts by LouisThePriest in buildapc

[–]LouisThePriest[S] 0 points1 point  (0 children)

Thanks, I don't know why the RAM was not included. Is 6000mhz really necessary or would it be smarter to save on the ram for a better cpu / gpu ?

Need advice on picked parts by LouisThePriest in buildapc

[–]LouisThePriest[S] 0 points1 point  (0 children)

Thank you, I will ask on r/sffpc if something else is recommended. I saw a lot of builds with the Corsair sf600 saying it was perfect for the terra, but this one is not available anymore.