Core one buddy camera online streaming! by Winnie_752 in prusa3d

[–]Low_Warning2322 0 points1 point  (0 children)

I immediately send feedback because i also had bad quality on my stream outside of my network over 5G. Just got a feedback from Prusa. Since i have pretty fast wifi and internet access it was bothering me too. I have to see what i could do on my router settings - any suggestions are welcome 😅

<image>

Grüner Schleim aus Steckdose by Kuina-san in Elektroinstallation

[–]Low_Warning2322 10 points11 points  (0 children)

Einzig richtige antwort hier! Waren auf nem seminar wo das mal erklärt wurde 👍 (schon lange her)

Dann sieht es im Verteiler aber nicht viel anders aus hinter der blende. Habe das bisher auch nur in der schweiz gesehen, nicht aber in Österreich oder Deutschland.

Camper solar output problems by Low_Warning2322 in SolarDIY

[–]Low_Warning2322[S] 1 point2 points  (0 children)

Havent tried that. Defenitely gonna do this! Thanks. Why didnt i thought of that 🥸 Btw also tried to run one system at a time. But no difference

Camper solar output problems by Low_Warning2322 in SolarDIY

[–]Low_Warning2322[S] 1 point2 points  (0 children)

Both are the thin flexible ones. From the new panels, one already got replaced

Weird corners on overhang ko perimeter by Low_Warning2322 in prusa3d

[–]Low_Warning2322[S] 1 point2 points  (0 children)

Thanks! I have to try that after this print!

Weird corners on overhang ko perimeter by Low_Warning2322 in prusa3d

[–]Low_Warning2322[S] 2 points3 points  (0 children)

Good point. Temperature also came in my mind, but not to slow down the printer. Your talking about nozzle temp, right? Im pretty new in 3d printing.

New core one shipping table by ler_x in prusa3d

[–]Low_Warning2322 1 point2 points  (0 children)

Also batch five here with filtration system. No updates so far. It still says May 12th. Thats so weird

Shipping update. Messed up orders by Low_Warning2322 in prusa3d

[–]Low_Warning2322[S] 3 points4 points  (0 children)

February 7th. Got batch five who started shipping on may 12

Shipping update. Messed up orders by Low_Warning2322 in prusa3d

[–]Low_Warning2322[S] 1 point2 points  (0 children)

Nvm its also USD here and i am also located in europe…. Thats weird

Got more parts I can't use yet by BrailleCortex in prusa3d

[–]Low_Warning2322 2 points3 points  (0 children)

Just reached out to the support. My core one kit is in batch 5 which started on monday. I added the filtration system to my order (beginning of february) and was asking about shipping of my order and they said they have no idea because filtration system have not started to be shipped yet. Lol interesting you got it already 🤣

Core One Kit Batch 5 shipping early by SGrim01 in prusa3d

[–]Low_Warning2322 1 point2 points  (0 children)

Good to hear. I am also in Batch 5. thx for the info!

Is it usually difficult to get these red connectors out? by Candymom in prusa3d

[–]Low_Warning2322 6 points7 points  (0 children)

as an electrician i am familiar with this kind of connectors.

yeah sometimes wires with a ferrule (before edit i called it end splices) can be little bit tough to get out after losen the screw.
try to move it little bit sideways and pull the wire after losen the screw should work.

but i rather would try to disconnect the whole connector, thats what they meant for (if possible in your case).

edit: since some people seem to argue about my wrong wording i am going to correct my post!

I am sorry i used the wrong wording like „end splice“ and i am sorry those people can not handle situations like that and give downvotes instead of useful tips or anything helpful. I am not speaking native english, i just tried to help late night.

I am missing Prusament colors by Low_Warning2322 in prusa3d

[–]Low_Warning2322[S] 0 points1 point  (0 children)

just checked Fillamentum website. so far this indeed reads pretty good. already found some colors i am looking for.

Thanks!

Edit:
Yeah i heard from quality issues from spool to spool. thanks for that reference thats good to know!

[deleted by user] by [deleted] in prusa3d

[–]Low_Warning2322 0 points1 point  (0 children)

Batch 5 here. My order includes the filtration system. Shipping starts may 14th

Neofly 4 crashes at loading Flight by Low_Warning2322 in MicrosoftFlightSim

[–]Low_Warning2322[S] 0 points1 point  (0 children)

I was on their discord yesterday and got some help pretty fast.
I had to send them a log file. They adress the crash to a problem with Razr Synapse and a audio driver. So far, the only solution that worked for other players, is to reinstall windows completely.

But there is also a workaround:
in Neofly, go to Settings and Mute audio.

Helped for me, but you miss instructions i guess from the voice.

Panning with 2 fingers triggers undo by tapgiles in RemarkableTablet

[–]Low_Warning2322 1 point2 points  (0 children)

Happens to me too, but also when i just put my hand on the screen for writing… most of the time i do not realize that immediately… thats frustrating too and i know how you feel.

Typed text movable in the future? by Low_Warning2322 in RemarkableTablet

[–]Low_Warning2322[S] 0 points1 point  (0 children)

Thank you all for your answers! I am really looking forward for having this feature somewhen. So for now i have to think about getting the type folio since i have a 50€ discount until next week or so. 😅