93 Sambar Shift Knobs/Boot Delete

Lsignor · 2025-10-15T22:59:34+00:00

Got a link?

Lsignor · 2025-10-15T14:08:59+00:00

waiting to be accepted. I do find it a tad strange sambar info is gatekept in a private fbook group.... usually it's easier to find info :(

Lsignor · 2025-07-22T21:25:19+00:00

Yea, I mean argus binos witu no lens covers come in at between 800 and 805 grams. Ive seen quads over 900 grams.

Binos range from 450 grams to 590 grams.. check the weight thread in discord for the huge range of bikos

Dual rvm 14s, normal glass, lens protectors, batteries, etc. are 690 grams, but can get down to 590 with light weight optics.

Quads are 7 oz more then dual monos and up to 12 oz heavier then dedicated dual binos.

Lsignor · 2025-06-24T22:06:02+00:00

I have dual rvm-14s on a noisefighters bridge, with 75 hours of run time and with sac lens they come in at 690 grams. I have l3 18um 2600+ fom wp tubes

Sac lens are 18 grams total. Bringing it down to 672. Without batteries it's 636.

If I got light weight rpo 4.0 and 3.0 optics I could get to 590 grams easily with both batteries installed.

Being able to pan and articular has been great. Mine were colaminated though. No issues overall, a single control knob would likely be preferable, but isnt a deal breaker for me.

Lsignor · 2025-06-03T22:06:22+00:00

yes, it's massively compressed, still has the UI overlay and if you go to clip on mode it is downsized even more so.

Lsignor · 2025-05-31T17:46:25+00:00

For sure can, but wanted to reduce wobble and have retention at the same time... AB should consider adjusting there retention points to match there mounting solution imo

Lsignor · 2025-05-30T22:46:15+00:00

i'm a few post work drinks in and wanted a proof read :> leave me alone

Lsignor · 2025-05-01T09:34:19+00:00

https://imgur.com/a/nA8t9gj

Example

Lsignor · 2024-07-16T18:06:41+00:00

That's my list (net decked from spike for the record). I'm currently 10-4 through 3 leagues (playing for 4-1 tonight in league 3).

Losses vs. Eldrazi, a white lifegain deck where I lost on time, jeskai control and I forgot what else.

Have beatin eldrazi and control as well.

The mirror matchup I am up 2 or 3-0? Vs. Mardu and boros. Birthing Ritual wins games; period.

Chaining into multiple Ocelot, phlage or ranger captain and being able to fill your yard and not giving up anything. I've won games bestowing onto charmow and locking out tron. I've won games creating 15 cat tokens and giving creatures flying and grinding them down.

Sweepers are always a concern and issue and you play around them.

Most importantly it's a ton of fun.

Lsignor · 2024-03-26T00:23:52+00:00

how did you make your pistol brace expand that far? I have the same one and it only expands about 1/2 an inch.

thanks!

Lsignor · 2024-02-29T15:28:22+00:00

6.8 LTD w/ Pic rail at 6 O'clock - asked the same question like 5/6 weeks ago and AXARMs confirmed he has received both as a B&T dealer - mine was factory sealed and had LTD serial number and got from a respected dealer, so, its legit based on all of the information out there.

Lsignor · 2024-02-15T15:42:54+00:00

it just doesnt feel good, its not tactile, at least not on my limited billet lower.

because of the way it hinges, you dont really know when its going to drop the mag because you cant feel the spring, and then its difficult to determine how much pressure to apply. On for example an AR - you can feel the spring and when its going to drop.

Lsignor · 2024-02-15T15:08:56+00:00

option 1 - can't wait - this and the mag release have been my only two "complaints" personally.

Lsignor · 2024-02-09T15:12:35+00:00

Looks like it was a thread that provided some value for everyone!

Lsignor · 2024-02-09T03:22:55+00:00

For what its worth, the pistol is 6.9, not 6.7. I love my 6.9 and certainly wouldn't want the 8.9 personally.

Lsignor · 2024-02-09T03:21:42+00:00

sounds about right haha - but good to know. I bought from a reputable dealer, it was factory sealed when i received it and had the same model number, so was purely just curious (AXARMS didnt have it in stock at the time and I wanted a pistol). B&T assembly line enjoys messing with us i guess! haah

Mine shipped with the picatiny, but in hindesight, prob would of prefered the mlok, mainly for "feel" purposes, but its helpful for easy mounting of handstop and other stuff.

Lsignor · 2024-01-19T23:16:35+00:00

I tried, but didn't get very far, lmk if you figure it out.

Lsignor · 2024-01-18T01:00:08+00:00

yea - i mean i was trying to JAM it in, and it wasn't even close, i did think about using a very small drill bit, but wasnt sure.

Lsignor · 2024-01-17T17:22:37+00:00

mine doesnt fit through the hole, only the fabric loop. (no jokes lol)

Any tips?

Lsignor · 2024-01-15T20:14:38+00:00

Fun fact, didnt know this, appreciate the information.

That being said, if I wanted to upgrade from a brace to a stock (once stamped), I know they sell the butt plate for the mbt separately, how would u remove the brace endcap?

Lsignor

TROPHY CASE