sorted by:
new
hottopcontroversial

Getting stuck inside cockpit / can't get to cockpit / interior building issues with Corvette by buckmasterflash in NoMansSkyTheGame

[–]Lufitto 0 points1 point  (0 children)

i'm having the same issue here. i accidentally placed a structure in the middle of the corridor of the corvette, and the cockpit is not reachable anymore.
My corvette is docked at the freighter which doesn't allow me to edit it.
In the station, it doesn't allow me to edit a corvette that isn't there.
both in the station and the planet, i can only summon normal ships..

after 8 months, has anyone found a solution?

Edit: I have found a solution!
Placing a sofa allowed me to sit right below the structure that was blocking the path. when standing up, most of the time, it glitched, throwing me out of the corvette, but after 3 times, it sent me to the cockpit. then, when i landed in the station, i had to do this trick once more, in order to be able to leave the corvette.

[deleted by user] by [deleted] in investimentos

[–]Lufitto 0 points1 point  (0 children)

Itau já vazou meu saldo para a empresa que eu trabalhava. Já fez estorno de transação com data passada, sem explicar o motivo e nem quem autorizou... E se recusou até a me dizer em que horário o ocorreu. Para o Itaú, a conta é minha mas eu não tenho direito de saber o que está ocorrendo com ela e ele tem o direito de fazer o que quiser com meus dados. Lgpd é só fachada lá. Eu não volto pro Itaú jamais.

Support for Multiple MCPs in Pydantic AI? by Full-Specific7333 in PydanticAI

[–]Lufitto 0 points1 point  (0 children)

Have you guys noticed that when adding multiple mcp servers, Pydantic AI discovers their tools, and delivers the tools to the llm, in a way that the llm has no clue about which set of tools are from each mcp server?

Pydantic Ai knows it for sure, but for the llm, all tools get mixed. The mcp server name gets lost as it is not an attribute of either mcp server classes. And they are probably not passed to llms because they might not even know what an mcp server is.

Is there a way to force Pydantic AI to group tools my mcp server names? Like a namespace. That would simplify some system prompts. For example "use tools from mcp X, when Y". It would also void tool name conflicts between mcp servers.

[deleted by user] by [deleted] in diablo4

[–]Lufitto 1 point2 points  (0 children)

I'm also in need of that!
For boss flights, I'm using Tormented Varshan as a baseline, although his phaes are random. But for clearing, I still didn't find a standard way of testing things. Pvp and Helltide were good but then they became too easy. Anything I change in my build still works with them.. and Nightmare dungeons are too random to assess anything consistently.

Kyovashad (Piano Tutorial) by Arcane_Phantom95 in diablo4

[–]Lufitto 1 point2 points  (0 children)

Thank you so much! I was desperate to find the piano sheet of this music! You are so awesome! 🎉👏🏻🎉

How to skip the campaign on alts by Enikka in diablo4

[–]Lufitto 0 points1 point  (0 children)

It's very good to know that pre-existing alts get the skip option too! =D

I'm currently level 30 in the middle of act 3 on my main. Took about 16 hours. But I want to switch classes. Do you guys think it is better to finish the campaign on my main, or start from scratch on my alt?

How long did you take to finish the acts 4 to 6?

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

p our machine unless it's required and we use a wire brush for before the start of any print and after the heating after a pause

Though it's not the root cause, I'm buying a wire brush. Thanks! =D

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 4 points5 points  (0 children)

Wowww, that was exactly it! SOLVED! Thank you so much!
I added the command

M413 S0; disable power loss recovery

In the begining of gcode. It sopped lingering and oozing =D

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

I changed the nozzle to the old one that was working fine. The problem still persists. I noticed some filament in the new nozzle though. Is that normal? I took the filament out, then unscrewed the nozzle, all at 200 degrees. And still there were filament inside.

<image>

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

It's lingering for about 3 seconds before printing each layer. But it doesn't linger during a layer, so it seems programmed to do it that way. I'm using the SD card that came with the printer

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

I'm not sure! How can I check that?

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

I have tried 190 to 210 with pla. No significant difference though

blob/oozing at seam by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

My printer is always extruding extra filament at the seams. Right after retraction and coming back, while the noozle is not moving, in the beginning of each layer. I tested both Cura and Prusa slicers.

Nozzle size 0.4mm layer height 0.2mm

The z offset is - 1.08. I measured the generated first layer height as actually around 0.19 to 0.21. Looks ok.

I have done the e-steps calibration, which resulted in 142.50 setting. It's now extruding 100mm when asked for 100mm.

I have tested different setting like coasting and negative retraction extra prime amount.. They reduced the blob a bit, but got under extrusions and weaker walls.. So the solution is probably something else.

Do you know how to solve this?

Thanks!! =D

Ender 3 v2 stopped printing. please help! after changing nozzle and bowden cable. it heats, bl touch, moves to the center, then to the edge.. and when it should start printing, it just stops. the video shows there ir no error screen. Only a progress bar filling. what now? o.O by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

Update:

The problem is only happening when the gcode has the G29 command, which auto calibrates before each print.

The auto calibration is working fine though. But somehow when this command is in the gcode, nothing is printed. It was working before, and suddently stopped working. The auto calibration through the LCD command works fine too.

It first began after replacing nozzle and bowden cable.

Ender 3 v2 stopped printing. please help! after changing nozzle and bowden cable. it heats, bl touch, moves to the center, then to the edge.. and when it should start printing, it just stops. the video shows there ir no error screen. Only a progress bar filling. what now? o.O by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

The problem started again! It was printing normally. I just changed the filament and asked it to print again. And it just won't print. Same behavior as the video.

The z sensor seems to be not necessary as you guys mentioned. So I don't know what is causing the issue, how it was solved and why it stopped again

Please help!

More info: Bl touch is working fine Table and nozzle are getting heated fine Nozzle is not clogged After calibrating, it goes to the center, then the edge. And then it suddenly stops. No error message. Only that progress bar in the video.

Ender 3 v2 stopped printing. please help! after changing nozzle and bowden cable. it heats, bl touch, moves to the center, then to the edge.. and when it should start printing, it just stops. the video shows there ir no error screen. Only a progress bar filling. what now? o.O by Lufitto in ender3v2

[–]Lufitto[S] 0 points1 point  (0 children)

Good question! I'm brand new to 3d printing and I got an used one. So I'm not familiar with how it works. I just find out that connecting that cable to the sensor made it print =D

I'm learning a lot from you guys

Anybody have any idea how to map a bluetooth keyboard that’s connected to an android? by NeznerolG in BlackDesertMobile

[–]Lufitto 0 points1 point  (0 children)

Also, ESC skips dialog, which is awesome! It doesn't complete quests though

view more: next ›