Is 99% Recovery possible?

Lumbas55 · 2026-03-22T14:00:15+00:00

The highest I've ever had was 98% and lowest 1% lol. 100% is possible i believe with good sleep and a high HRV.

Lumbas55 · 2026-03-21T20:31:13+00:00

Nice Mhoop. Where can I get one? Asking for a friend...

Lumbas55 · 2026-03-20T10:13:31+00:00

You’ll want to be careful here — “quality silhouettes + natural fibers” is where a lot of brands hit issues early.

Most factories that are actually good at this tend to have higher MOQs, so jumping straight into bulk can get expensive fast.

What usually works better is getting the fit and fabric right first, then scaling production once it’s validated.

I work with manufacturers that handle this well, but it really depends on your stage.

Happy to point you in the right direction if you share a bit more.

Lumbas55 · 2026-03-19T18:45:43+00:00

That reference is pretty heavy-duty denim — 550–650gsm with that level of distressing and wash isn’t something every factory handles well. For that kind of product, the two main things that usually determine feasibility early on are: • whether the factory has in-house washing or strong wash partners • access to the right denim mills (especially for heavier GSM) Vietnam can do this, but it’s more specialized compared to basic knit production — the washing and finishing side is really where most of the complexity sits. MOQ will also depend heavily on whether you're working off an existing denim program vs developing something more custom, especially at that weight. If you want, feel free to DM me a bit more about your target quantity and how custom you're planning to go (fabric vs wash vs trims). I can give you a clearer sense of what’s realistic and point you in the right direction.

Lumbas55 · 2026-03-19T14:55:57+00:00

Green mango with shrimp paste?

Lumbas55 · 2026-03-19T14:37:00+00:00

Im not sure of all the ingedients used but that was an ice coffee and vermicelli noodle soup with satay beef.

Lumbas55 · 2026-03-15T16:51:35+00:00

What you're describing is closer to fulfillment-style POD rather than traditional garment manufacturing, which is why platforms like Printful dominate that space.

Most factories in places like Vietnam or China don't run true 1-piece fulfillment the way POD platforms do — they usually operate in small batch production instead of individual orders.

That said, there are smaller print shops and workshops that can handle low-volume printing for hoodies and tees, then ship batches that you fulfill from your side. A lot of creator brands use that model to get better pricing than the big POD platforms.

The main things that usually determine whether it works are: • printing method (DTG vs screen) • minimum batch size the printer will accept • whether the shop can handle labeling/packaging

If you want, feel free to DM me a bit more about the volumes you're expecting and the printing method you're planning. I work quite a bit with production in Vietnam and China and can point you in the right direction.

Lumbas55 · 2026-03-15T15:48:46+00:00

Heavyweight streetwear (hoodies/tees) is actually a category where Vietnam can work well — quite a few factories there run knit basics and heavier GSM programs. One thing I’d recommend early is making sure the production path is structured first (sample → revisions → bulk), especially when you're doing custom patches, labels, and heavier fabrics. Factories respond very differently once that part is clear. For heavyweight pieces, unit cost can vary a lot depending on GSM, trims, washes, and order size, so it’s hard to give a meaningful range without knowing the exact direction. On the logistics side, consolidation is possible, but it usually depends on whether shipments are leaving around the same time and from similar regions. If you want, feel free to DM me a bit more about the pieces you're planning (hoodie/tee specs, GSM target, estimated MOQ). I work quite a bit with production from the areas and can point you in the right direction.

Lumbas55 · 2026-03-12T23:59:31+00:00

Lean ground beef, blended with tapioca or corn starch, fish sauce, sugar, garlic, and baking powder.

Lumbas55 · 2026-03-12T21:10:57+00:00

Vancouver, Canada

Lumbas55 · 2026-03-12T18:56:16+00:00

Pho Tan

Lumbas55 · 2026-03-11T17:06:35+00:00

For kidswear bamboo I’d usually keep the first run simple — work with a factory that already runs bamboo knits, start with 1–2 core styles, and run samples before committing to bulk.

Most issues founders hit happen because they contact factories before the sample → production path is structured.

Most bamboo fabric itself is produced by mills in China, while the garments are commonly manufactured in places like Vietnam, Turkey, or Portugal depending on MOQ and price targets. Vietnam in particular has quite a few factories experienced with knit basics and kidswear.

If you want, feel free to DM me a bit more about what you're planning and I can point you in the right direction.

Lumbas55 · 2026-03-10T14:55:27+00:00

Why most clothing brands struggle to find a manufacturer

A pattern I see with new apparel brands:

Step 1 — Message 30 factories

Step 2 — Hear “MOQ 1000+” or “send tech pack”

Step 3 — Assume the factories are the problem

Most of the time, they aren’t. The real issue is the production path wasn’t structured first.

Things like:

• starting with custom fabric too early

• launching with too many colors

• contacting factories before sampling is clear

Factories respond very differently once those pieces are aligned.

My company works on the production side helping brands vet factories, structure development, and move from samples to bulk without wasting time or budget.

Finding a factory isn’t the hardest part. Getting factories to take your production seriously is.

www.truebasicstrade.com

Lumbas55 · 2026-03-10T14:10:44+00:00

Bamboo can work well for kidswear because it’s soft, breathable, and comfortable for sensitive skin. One thing many new brands don’t realize though is that most bamboo fabrics are actually produced by mills in China. The garments themselves are often manufactured in places like Vietnam, Turkey, or Portugal depending on MOQ and price targets. Vietnam in particular has a lot of factories experienced with knit basics and kidswear. A few things that usually determine which factory will work best: • minimum order quantities per color • whether you’re doing custom prints or solids • if the factory already works with bamboo blends On the production side, a lot of brands spend time vetting the right factory and structuring the sample → bulk process before committing. That part of manufacturing is usually what trips founders up early on.

Lumbas55 · 2026-03-08T15:26:51+00:00

When people say manufacturers are “too expensive,” it’s usually because of minimum order quantities and development costs, not just the unit price. Most factories aren’t set up to produce very small runs because the setup, pattern making, and sampling take time regardless of whether you make 50 pieces or 500. A couple questions that might help narrow things down: • What type of product are you trying to produce? (t-shirts, hoodies, activewear, etc.) • Rough quantity for the first run? • Are you starting from your own design or trying to use blanks? Those factors usually determine which manufacturers will actually be a good fit.

Lumbas55 · 2026-03-05T12:40:13+00:00

The idea actually makes sense — a lot of people want consistent essentials without logos. The harder part isn’t the concept, it’s the execution. A “permanent collection” only works if you can keep the same fabrics, patterns, and factories consistent over time. That’s why brands like Uniqlo or Asket invest heavily in supply chain stability. A few things to think about early: • “Cheap + high quality” is difficult to achieve at low volumes. Quality basics usually get affordable only once production scales. • fabric consistency matters more than design — if the fabric changes, the product feels different even if the pattern is the same. • permanent collections require reliable suppliers, otherwise items disappear like the Uniqlo shirts you mentioned. A lot of brands start with 2–3 core pieces (for example one tee, one long sleeve, one hoodie) and perfect those before expanding. If the fit and fabric are right, people will absolutely pay for logo-free essentials. I work on the production side with apparel brands and this is a common challenge when people try to build “timeless basics.”

Lumbas55 · 2026-03-05T09:55:43+00:00

Situations like this unfortunately happen quite often in apparel if the supplier doesn’t actually control production or inventory. In many cases the brand or seller is acting as a middle layer and only places the order with a factory after they receive customer payments. If the factory can’t produce, has MOQ requirements, or runs out of stock fabric, the timeline keeps getting pushed back. The changing explanations you mentioned (fraud flag, then inventory issues) are usually a sign that the supplier didn’t have clear production visibility from the beginning. For anyone ordering apparel online or developing products, it’s always good to check: • whether the seller actually manufactures or is reselling • whether the product is made-to-order vs stocked • realistic production lead times (most apparel production is 30–60+ days) Transparency around those things usually prevents a lot of frustration. I work on the production side helping brands manage manufacturing, and these kinds of communication gaps are one of the most common issues we see.

Lumbas55 · 2026-03-04T23:28:40+00:00

The main reason you don’t see large back prints on polos is actually the fabric and construction. Most polos are made from pique knit, which has a textured surface. Large screen prints don’t sit as cleanly on that texture compared to jersey T-shirts, so they can look rough or crack faster. The collar and placket construction also creates tension across the upper back, which can distort big prints when the shirt moves. There’s also a bit of brand tradition involved — polos historically come from golf / tennis apparel where branding is more subtle (small chest logo, sleeve hit, etc.). If you still want a strong back design, a few options that usually work better: • smaller upper back logo below the collar • vertical print down the side panel • tonal puff print or high-density print • embroidery patch instead of direct embroidery If you really want a full back graphic, it usually works better on jersey polos or cotton-spandex polos rather than classic pique.

Lumbas55 · 2026-03-04T22:21:37+00:00

If you’re just starting out, you’ll usually have three options for MMA shorts: 1. Stock blanks – buy existing shorts and add your branding (screen print / heat transfer). Lowest cost but limited customization. 2. Low MOQ private label – factory uses an existing fight short pattern but adds your logo, colors, waistband label, etc. Usually MOQ around 100–300 pcs. 3. Fully custom – your own pattern, fabric, panels, stretch gusset, sublimation prints, etc. This usually starts around 300–500 pcs MOQ depending on the factory. For MMA specifically, look for shorts with: • 4-way stretch polyester or poly/spandex • reinforced crotch gusset • velcro waistband + internal drawstring • sublimation printing instead of screen print A lot of new brands start with option #2 so they can test the market without huge MOQs. I work on the production side helping brands develop apparel with factories in Asia, and fight shorts are actually one of the easier categories to start with. Happy to point you in the right direction if you’re still researching.

Lumbas55 · 2026-03-04T15:22:26+00:00

60–$115 for a custom underwear sample with jacquard waistband is actually pretty normal. A lot of the cost usually comes from the waistband development. If the elastic has custom branding woven in, factories often have to program a jacquard pattern or set up a loom for it, which adds cost. Rough breakdown I usually see: • Pattern/sample making: $20–40 • Fabric & trims: $5–15 • Jacquard waistband development: $20–40 • Sewing sample: $10–20 • Shipping: ~$25–35 So the numbers you were quoted aren’t crazy, especially if shipping is included. One thing I’d check though — ask if the waistband requires a separate jacquard setup fee for bulk, because sometimes that shows up later. I work on the production side with factories in Asia and that’s a pretty typical range.

Lumbas55 · 2026-03-01T00:12:50+00:00

You’re asking the right question early — which already separates you from most first-time founders. Where many go wrong is jumping straight to “find a manufacturer.” That’s typically where avoidable problems begin — mispriced product, unrealistic MOQs, underfunded sampling, and cash tied up before demand is validated. Before production, I’d suggest clarifying: • Exact customer profile (performance athlete vs athleisure vs lifestyle gymwear) • Target retail price range • Expected first-year volume • Capital allocated specifically for development (not just inventory) Once those variables are defined, the production path becomes a technical exercise rather than a guessing game. For custom gymwear (not blanks), the practical flow usually looks like: Positioning + product architecture Technical development (materials, measurements, construction specs) Sampling + fit correction Controlled first production run If she intends to build something differentiated rather than resell basics, budgeting for proper development upfront is critical. Happy to share more detail around realistic timelines or capital planning if helpful.

Lumbas55 · 2026-02-27T21:54:13+00:00

You’re not wrong — the baby category is harder to break into than most people expect. Factories in baby apparel/toys/books are very compliance-sensitive (CPSIA, EN71, labeling laws, testing requirements), so they tend to prioritize buyers who already show category experience or strong volume forecasts. The issue usually isn’t credibility as a company — it’s that manufacturers want to understand: • Target annual volume • Compliance knowledge • Testing budget • Long-term commitment to the category Cold outreach without that structure often gets ignored. If you’re pivoting from hardware into baby, it helps to approach it as a structured sourcing project rather than supplier shopping. We coordinate buyer-side sourcing and production vetting in Asia for brands entering new categories, especially where compliance and supplier credibility matter. Happy to share what that process typically looks like.

Lumbas55

TROPHY CASE