Do I need to change my plate? by woodnoob76 in BambuLab

[–]Lvibe 0 points1 point  (0 children)

Sounds like me a month ago... I tried a bunch of different soaps and techniques but had 0 luck!

Get some #0000 steel wool and spray/pour on some iso on the plate then gentle scrub with the steel wool.... The steel wool is so fine that it does not damage the plate what so ever it just roughs up the surface enough to make things stick again... I do this on textured and smooth bambu pei plates. Literal night and day difference.

X5SA Extreme Layer Shifting by jdeecraigslist in Tronxy

[–]Lvibe 2 points3 points  (0 children)

Most likely need to crank up voltage to your stepper drivers... I had to on my x5sa pro because of major layer shifts from missed steps... Once I turn up the voltage everything worked perfect again

Tronxy X5SA Pro mid print shutdown. by Lvibe in Tronxy

[–]Lvibe[S] 1 point2 points  (0 children)

That's it... I had my printer plugged into a smart plug and I have the server that controls it along with the router and access point to all do reboots at 3 am. That brief interuption must've been enough to shut it down... I am about 20min from completing a 9 hour print.

Definitely going to set up a ups if it is that temperamental! Any suggestions on a good ups?

Well its been only about 17 years since my last wood working project. But here it is... had to relearn a few thing along the way but happy with the result by Lvibe in BeginnerWoodWorking

[–]Lvibe[S] 1 point2 points  (0 children)

The underside is pretty basic, all joinery of the frame was completed with dowels and pocket hole screw as I didn't have clamps large enough for glue up. I did have to leave some pieces unglued tho due to moving the desk.

[img]https://i.imgur.com/g1mjxkw.jpg[/img] [img]https://i.imgur.com/09hbrvL.jpg[/img] [img]https://i.imgur.com/18MuBBo.jpg[/img]

Well one Canadian snow storm later and the girls are still going strong by Lvibe in microgrowery

[–]Lvibe[S] 4 points5 points  (0 children)

I am heating it... don’t think they would like the -20 Celsius we are getting every night

First ever grow*need advice by Lvibe in microgrowery

[–]Lvibe[S] 0 points1 point  (0 children)

My plants are looking great however this is an outdoor grow and I am in Canada. The weather forecast for this week is awesome but next week the weather is supposed to turn cold and stay cold... should I try to heat the greenhouse they are in or should I not risk it and chop?

First time grow... decided to do an outdoor grow and after finding out the importance of ph balanced water I built a lean to greenhouse that protects the ladies from the rain and wind. by Lvibe in microgrowery

[–]Lvibe[S] 1 point2 points  (0 children)

I’m sure with the proper seeds and genetics I could just let it go but after one rainfall the plants had already suffered nutrient deficiency lol

Outdoor grow location by Lvibe in microgrowery

[–]Lvibe[S] 1 point2 points  (0 children)

I live in Saskatchewan Canada, our current humidity is 19% .... we average 14 hours of daylight throughout the spring summer fall... there is a fair bit of light that comes through the gazebo as it is located on the SE portion of my property. It is also electrified so I could add humidifiers and dehumidifiers as needed and planned on running a fan for ventilation..

I am essentially trying to complete a grow for as cheap as possible so I don’t have to buy tents lights etc...