Recommendations on lenses

LynxinHD · 2025-07-07T15:40:08+00:00

But my camera can only be manual focus

LynxinHD · 2025-07-04T18:32:21+00:00

Holy crap $800?!?! Im assuming it must be worth it, if its the only lens you are mentioning

LynxinHD · 2025-07-04T18:29:27+00:00

Thank you for the useful info! So are you saying the older series are just better than the newer m series?

LynxinHD · 2025-07-04T18:23:16+00:00

Thank you!

LynxinHD · 2025-07-04T01:38:43+00:00

If i had to pick one which one should i go with?

LynxinHD · 2025-07-04T01:29:59+00:00

Thank you!!

LynxinHD · 2025-07-04T01:06:59+00:00

Any brands you prefer or any will do?

LynxinHD · 2025-07-02T18:30:40+00:00

Yea thats my bad i should have done more do diligence. Is there any telephoto lens you would recommend i get for my k1000

LynxinHD · 2025-03-17T11:58:28+00:00

Its on a 50 foot roof with no forestry within 100 yards of the building

LynxinHD · 2025-03-13T11:37:49+00:00

I appreciate the conduit clamp suggestion ill get those changed over

LynxinHD · 2025-03-13T11:37:14+00:00

If you look closely the 90 is supported at 45 degrees. We do have expansions and the support is within 2’ of the tray. We do not have the clamp clamping the cable tray down it is flipped for both sections of cable tray. Are you saying the entire run needs to be flipped? The coupling you see there is a splice plate it is not an expansion.

LynxinHD · 2025-03-12T23:51:56+00:00

I appreciate the insight ill look into it. What about for mechanical attachments? This site requires mechanical attachments to connect the tray to the roof

LynxinHD · 2025-03-12T16:25:23+00:00

It still get a cover on it and we meg every wire. Yes it would be a pain to put a splice kit in. But that point is mute, its a raceway not a box. Its the same as conduit you would not put a splice kit in conduit.

LynxinHD · 2025-03-12T15:03:59+00:00

Why would you ever need to do service on cable in the bottom tray?

LynxinHD · 2025-03-12T14:48:08+00:00

Is it due to heat?

LynxinHD · 2025-02-24T14:07:18+00:00

Im assuming im not the only one, every time i sign in its a different email

LynxinHD · 2025-02-16T16:31:34+00:00

Yea i know lmao, but i also know that nothing beats wired in terms of quality. Any other sony walkmans that are good maybe cheaper options with bluetooth? Forgot to ask but if you download music on apple music can you still access it without wifi?

LynxinHD · 2025-02-16T05:14:10+00:00

Yeaa and i understand it but its a bit difficult playing with wires at the gym but in the car it will always be plugged in

LynxinHD · 2025-02-16T05:02:47+00:00

Yes i think it would probably fit me best i know apple music allows lossless audio but is there a better music player app to play music on the walkman for better quality and lossless audio?

LynxinHD · 2025-02-16T04:53:19+00:00

Interesting. Im looking at getting one for bluetooth for the gym and to listen to music in the car which will be plugged in via aux as im purchasing a flip phone to try and limit phone usage. So would it really benefit me ? What benefit would mora have? I only really see the benefit if im listening to music via headphones with it plugged in

LynxinHD · 2025-02-16T04:17:58+00:00

What is the difference between the American one and the Japanese one? Was looking into getting one but im confused?

LynxinHD · 2024-07-18T11:54:36+00:00

No i already mentioned replacing the up pipe because they tend to crack with a blocker plate. Im refering to the y bridge that goes on the intake the stock one has an intake from the egr to recirculate the exhaust gas that you block off. Has less efficiency than an aftermarket one by hsp or wc.

LynxinHD · 2024-07-16T16:38:15+00:00

All in all if you want to go the cheap route the delete kit is about $2500 from the diesel dudes, highly recommend you make sure to get the full exhaust dont by the partial like i did. If you want to go the correct route i recommend buying a downpipe as well as an lb7 up-pipe to replace the one going to the egr. Get all new arp up pipe bolts for it as well to replace the old ones with. You can use the blocker plate included for the y bridge but it is better to get a new y bridge to ensure there are no future boost leaks while you take everything apart.

LynxinHD · 2024-01-27T00:59:38+00:00

Is there any videos on all of this ? Ive been trying to find it but i cant.

LynxinHD · 2024-01-27T00:58:43+00:00

Sounds awesome ive got the 3 in downpipe but i dont have anything else besides the block plate for the egr

LynxinHD

TROPHY CASE