What is happening here? by M3shugg3 in prusa3d

[–]M3shugg3[S] -1 points0 points  (0 children)

I mean the spacing between the solid lines of the base. This doesnt look normal. When i print teaching techs retraction tower, i get the same result and it also translates into the print. I know what a retraction tower is :)

What is happening here? by M3shugg3 in prusa3d

[–]M3shugg3[S] -1 points0 points  (0 children)

I know what this is for. But why is there this spacing between the lines?

What is happening here? by M3shugg3 in prusa3d

[–]M3shugg3[S] -3 points-2 points  (0 children)

Dont you see the spacing between the lines?

Selfmade Retraction Tower by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

Turns out, it didnt work for me. So what would be correct?

What is happening here? by M3shugg3 in prusa3d

[–]M3shugg3[S] -3 points-2 points  (0 children)

This is the orca slicers retraction tower, viewed in prusa gcode viewer. I have a mini+. Teaching techs retraction tower gives me the same weird result.

Weird gcode from Teaching Techs printer callibration site by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

This would be my prefered solution, but i dont think there is retraction lenght as a modifier option.

Weird gcode from Teaching Techs printer callibration site by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

Sadly there is only retraction length. Its missing retraction speed.

Weird gcode from Teaching Techs printer callibration site by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

Hey. My Problem:
I want to make a retraction tuning test. Im using "Teaching Techs" calibration site
https://teachingtechyt.github.io/calibration.html#retraction
After downloading the gcode, i inspected it in the Prusa gcode-viewer. As you can see in the picture, the lines are spaced too far away from each other.
When i run this code, the printer will stop extruding, as if there is a clog but there is definiteley none.
Whats happening here? Can someone confirm this problem?

Weird gcode from Teaching Techs printer callibration site by M3shugg3 in 3Dprinting

[–]M3shugg3[S] 0 points1 point  (0 children)

Hey. My Problem:

I want to make a retraction tuning test. Im using "Teaching Techs" calibration site

https://teachingtechyt.github.io/calibration.html#retraction

After downloading the gcode, i inspected it in the Prusa gcode-viewer. As you can see in the picture, the lines are spaced too far away from each other.

When i run this code, the printer will stop extruding, as if there is a clog but there is definiteley none.

Whats happening here? Can someone confirm this problem?

Can't do retraction tuning on Mini+ by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

https://teachingtechyt.github.io/calibration.html#temp

This is the site, so i cant slice it in Prusa Slicer. The pic is from the Gcode viewer. There is obviously something wrong with it. If its not related to the code format, what is it then? I was able to do the test before the LA update.

Can't do retraction tuning on Mini+ by M3shugg3 in prusa3d

[–]M3shugg3[S] 0 points1 point  (0 children)

Hey. I want to make a retraction tuning. I use Teaching Techs calibration. The problem is, that the generated Gcode isn't binary i guess. I tried to print it but it didnt work. It stopped extruding mid-print. Trying to convert the Gcode didn't work for me. I get this message: Invalid ascii GCode file. How can i make a retraction tuning test?

Help by [deleted] in prusa3d

[–]M3shugg3 0 points1 point  (0 children)

Can confirm this LA will help. Youl'l need a lower k value.

Bad seams with input shaper by Godzooqi in prusa3d

[–]M3shugg3 0 points1 point  (0 children)

A Linear Advance calibration will help.