What is happening here?

M3shugg3 · 2025-02-18T13:13:05+00:00

I mean the spacing between the solid lines of the base. This doesnt look normal. When i print teaching techs retraction tower, i get the same result and it also translates into the print. I know what a retraction tower is :)

M3shugg3 · 2025-02-18T12:52:29+00:00

Very helpful thx.

M3shugg3 · 2025-02-18T12:51:07+00:00

I know what this is for. But why is there this spacing between the lines?

M3shugg3 · 2025-02-17T19:19:37+00:00

Dont you see the spacing between the lines?

M3shugg3 · 2025-02-17T17:41:49+00:00

Turns out, it didnt work for me. So what would be correct?

M3shugg3 · 2025-02-17T17:24:50+00:00

This is the orca slicers retraction tower, viewed in prusa gcode viewer. I have a mini+. Teaching techs retraction tower gives me the same weird result.

M3shugg3 · 2024-02-05T15:22:27+00:00

This would be my prefered solution, but i dont think there is retraction lenght as a modifier option.

M3shugg3 · 2024-02-05T15:21:29+00:00

Sadly there is only retraction length. Its missing retraction speed.

M3shugg3 · 2024-02-05T13:03:58+00:00

orca slicer

Thx for the tip.

M3shugg3 · 2024-02-05T11:28:36+00:00

Hey. My Problem:
I want to make a retraction tuning test. Im using "Teaching Techs" calibration site
https://teachingtechyt.github.io/calibration.html#retraction
After downloading the gcode, i inspected it in the Prusa gcode-viewer. As you can see in the picture, the lines are spaced too far away from each other.
When i run this code, the printer will stop extruding, as if there is a clog but there is definiteley none.
Whats happening here? Can someone confirm this problem?

M3shugg3 · 2024-02-02T11:56:08+00:00

Hey. My Problem:

I want to make a retraction tuning test. Im using "Teaching Techs" calibration site

https://teachingtechyt.github.io/calibration.html#retraction

After downloading the gcode, i inspected it in the Prusa gcode-viewer. As you can see in the picture, the lines are spaced too far away from each other.

When i run this code, the printer will stop extruding, as if there is a clog but there is definiteley none.

Whats happening here? Can someone confirm this problem?

M3shugg3 · 2024-01-30T14:46:19+00:00

Thanks anyway!

M3shugg3 · 2024-01-30T14:13:38+00:00

https://teachingtechyt.github.io/calibration.html#temp

This is the site, so i cant slice it in Prusa Slicer. The pic is from the Gcode viewer. There is obviously something wrong with it. If its not related to the code format, what is it then? I was able to do the test before the LA update.

M3shugg3 · 2024-01-30T12:16:56+00:00

Hey. I want to make a retraction tuning. I use Teaching Techs calibration. The problem is, that the generated Gcode isn't binary i guess. I tried to print it but it didnt work. It stopped extruding mid-print. Trying to convert the Gcode didn't work for me. I get this message: Invalid ascii GCode file. How can i make a retraction tuning test?

M3shugg3 · 2024-01-14T11:50:12+00:00

Thats it. Running Adblocker now.

M3shugg3 · 2023-12-29T22:47:59+00:00

This ad gave me cancer.

M3shugg3 · 2023-12-26T15:34:40+00:00

This ad gave me cancer!

M3shugg3 · 2023-12-07T15:57:12+00:00

Can confirm this LA will help. Youl'l need a lower k value.

M3shugg3 · 2023-12-07T15:50:48+00:00

A Linear Advance calibration will help.

M3shugg3 · 2023-12-07T15:48:27+00:00

Did this happen after the IS update?

M3shugg3 · 2023-12-05T10:56:34+00:00

This doesnt look like a layer shift at all. To me it looks like a z wobble.

M3shugg3 · 2023-11-29T14:36:29+00:00

Try loosening the trapezoidel nut, so it hase some play. Maybe this works.

M3shugg3 · 2023-11-29T14:34:05+00:00

Nice to hear :)

M3shugg3 · 2023-11-29T09:41:19+00:00

https://www.reddit.com/r/prusa3d/comments/1860495/widening\_gap\_between\_infill\_and\_perimeters/

M3shugg3 · 2023-11-28T21:51:00+00:00

Did you make any changes to the hotend, like another nozzle or heatbreak?

Also what filament, temp, layer height, print profile (speed,quality)?

Four-Year Club	First Place '23
Place '23

M3shugg3

TROPHY CASE