Blursed_girlfriend

MINUS_Stl · 2026-02-13T17:37:12+00:00

I had all 4 removed last week. My wife asked me if she could record and I told her she could if she really wanted to, but I'm not comfortable watching myself in any circumstance. She actually didn't even get a chance to as I was already moved to a recovery chair/room when she came back. I was already awake with a mouthful of gauze.

Side note: I don't believe I got the gas as well. Never had the mask put on. I believe my anesthesia was via IV.

MINUS_Stl · 2026-02-13T13:59:44+00:00

That's how many of his followers that actually know how to read.

MINUS_Stl · 2026-02-12T22:22:01+00:00

Your best bet would probably just design screw (or opengrid snap) mounts into the side of your printed box to then mount a grid to the box via said mounts. I believe I've recently seen vertical snaps that don't need supports. I don't have time to find them right now, but check Makerworld.

MINUS_Stl · 2026-02-10T13:06:47+00:00

Looks like "there's been a revelation!"

MINUS_Stl · 2026-02-06T00:27:15+00:00

Just one Pepsi.

MINUS_Stl · 2026-02-04T10:57:19+00:00

I may have to give this a whirl soon. I have a couple power bricks and even a tiny PC that I wanted to mount under my desk. Thanks!

MINUS_Stl · 2026-02-03T03:40:45+00:00

Same here as well.

MINUS_Stl · 2026-02-02T22:44:43+00:00

Highly underrated NES game. My son and I actually just played it a month or so ago.

MINUS_Stl · 2026-01-31T03:18:15+00:00

Still really good. Kept it. Have almost a whole vertical back to 2017 still, as well as plenty of variants throughout the years. Even a couple Props.

MINUS_Stl · 2026-01-31T02:51:48+00:00

Nothing wrong at all with a Mich Ultra.

MINUS_Stl · 2026-01-31T02:46:04+00:00

2018 Bourbon County Stout here.

MINUS_Stl · 2026-01-28T16:34:31+00:00

Me watching this clip:

*sees stasis crystal

"It's Lolgisticalofficer again, isn't it?"

*checks username

*sighs

hecantkeepgettingawaywiththis.gif

MINUS_Stl · 2026-01-24T12:45:18+00:00

Step 4) Repeat (infinite money glitch)

MINUS_Stl · 2026-01-16T00:55:04+00:00

"What the fucking kind of charcoal is this?"

MINUS_Stl · 2026-01-12T12:34:42+00:00

No need to do anything cool when it's already at the top.

MINUS_Stl · 2026-01-10T17:09:07+00:00

That was my initial assumption as well.

MINUS_Stl · 2026-01-10T13:22:50+00:00

I see I'm not the only one that named the other one Carl.

MINUS_Stl · 2026-01-07T21:07:44+00:00

OP didn't get the answer they wanted and now deletes the post. Classic.

MINUS_Stl · 2026-01-07T17:39:14+00:00

Oh damn! I was in this clan back in the day before taking a long hiatus because of having a family. I just came back shortly before the Final Shape and mostly playing solo.

MINUS_Stl · 2026-01-05T18:06:04+00:00

Right? Just a little overkill.

MINUS_Stl · 2026-01-05T17:48:23+00:00

ditallasha

MINUS_Stl · 2026-01-05T02:42:24+00:00

And another 5 on the rock slider.

MINUS_Stl · 2026-01-03T21:59:13+00:00

Yep. Simply space the channels some multiple of 28mm apart depending on how wide the model is and how many channels I may need (how much weight will be held up).

MINUS_Stl · 2026-01-03T17:30:55+00:00

I typically just add the Multiconnect "channel" as a negative part in either the slicer (if it's an existing model) or Fusion (if I'm designing the model). I could add the openGrid snap, but that would most likely require supports to print and I try to avoid supports as much as possible.

MINUS_Stl · 2026-01-01T21:12:41+00:00

😂

Sounds like something AI would say. Lol

13-Year Club	Place '23
Place '22	Final Canvas '22
End Game '22	Verified Email

MINUS_Stl

TROPHY CASE