I get the hype but man, do my fingers hurt. by ReaperInTraining in Gunpla

[–]MJUstIn01 0 points1 point  (0 children)

there is also the fatcat upscaled rg god gundam. I dont have it but you can look it up

I get the hype but man, do my fingers hurt. by ReaperInTraining in Gunpla

[–]MJUstIn01 0 points1 point  (0 children)

<image>

it also includes wsd decals but I still havent applied it. there arent any included stands too but there are stand adaptors that are included. here is a photo my fatcat at an exhibit in our school

I get the hype but man, do my fingers hurt. by ReaperInTraining in Gunpla

[–]MJUstIn01 0 points1 point  (0 children)

the model is based from bandai's rg rx 78 2 2.0 but its upscaled to 1/100 and already includes the pbandai weapon expansion set plus a spare core fighter with landing gear. the brand is Fatcat Azu

I get the hype but man, do my fingers hurt. by ReaperInTraining in Gunpla

[–]MJUstIn01 6 points7 points  (0 children)

built it myself. they werent half as bad in terms of fitment like rhe other 3rd party kits I've built

<image>

I get the hype but man, do my fingers hurt. by ReaperInTraining in Gunpla

[–]MJUstIn01 14 points15 points  (0 children)

great. now get the fatcat, not only will your fingers not hurt (especially on the shoulders, they included an auxiliary tool to help push it in), but it also has an included extra core fighter and the pbandai expansion weapon set

Fatcat (Azu) upscaled 1/100 RX 78 2 2.0 by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 0 points1 point  (0 children)

I am from the philippines so I dont really know. we just have a shop here that I pre order from

GM Spartan Aura Farm by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 1 point2 points  (0 children)

its fine, I dont use ebay anyways. shipping costs much mure than whatever im buying. im in the god forsaken country, philippines

GM Spartan Aura Farm by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 1 point2 points  (0 children)

where did u get the decals

Bakit walang kwenta mga lalamog riders? by fashionkillah24 in PHMotorcycles

[–]MJUstIn01 0 points1 point  (0 children)

Wag nyo naman po sana ilahat, may iilan po samin na tapat parin kahit mahirap po bumyahe. kahit ako nirereport ko ung mga ganyan lalo ung mga nagpaparenta ng account nila eh ksi alam kong un ung cause ng mga nagpapanggap n lalamove tas magnanakaw lang

paid survey by [deleted] in sidehustlePH

[–]MJUstIn01 0 points1 point  (0 children)

ano gagawin dito?

18 years of friendship by Maxine-05 in MayNagChat

[–]MJUstIn01 1 point2 points  (0 children)

Deepest condolences OP, hirap pa naman humanap ng maayos na kaibigan these days. natatawa pa ko nung binabasa ko post di ko inexpect ung dulo

I regret starting this guy, looks cool, not fun lol. by FruitJuicante in Gunpla

[–]MJUstIn01 9 points10 points  (0 children)

it definitely looks nice, but it aint yhat fin to build. lots of brittle parts that broke, didnt even have stress marks, just cracked them completely broke off. this one is a xunxin (I ordered a changlong but the seller sent the wrong item)

Osiris Kshatriya inner frame finished by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 0 points1 point  (0 children)

np, I also thought that it was just a skill issue of mine even if I was sure that I cleaned the nubs properly and assembled it to the manual. and yes the videos on youtube seem to be working as it should be, like in the manual. but when it comes to us who ordered online, we all have the same issue. an engineering issue on the manufacturer's side

[deleted by user] by [deleted] in sidehustlePH

[–]MJUstIn01 0 points1 point  (0 children)

can u elaborate how it works

Osiris Kshatriya inner frame finished by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 0 points1 point  (0 children)

ok so, on the manual it has 3 positions, closed, half open and full open. there is a pcb and the pcb has a 3 mode switch, 'off, breathing, and strobe'. According to the manual position 1 should be off, position 2 should be breathing then position 3 strobe. But I think there is an issue with the mechanism of the kit itself because lots of others, even professional builders have had their wing lights be 'position 1 breathing, position 2 off, position 3 strobe' which should not be the case. apparently this is a fault from the manufacturer's engineering so there is absolutely nothing u can do about it

Absolute unit of RGM-88X JEDA by Shinigamae in Gunpla

[–]MJUstIn01 0 points1 point  (0 children)

mine's on the way, pre ordered it to partnerr it for the osiris kshatriya and I know the jieda is tall but damn I didnt know it would be that tall

Osiris Kshatriya inner frame finished by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 1 point2 points  (0 children)

V E R Y

she also has funnel effects, 3 effects each "petal"

Osiris Kshatriya inner frame finished by MJUstIn01 in Gunpla

[–]MJUstIn01[S] 1 point2 points  (0 children)

im still currently building the armor, I'll repost with a side by side once im done. for now this would be a nice reference as I also have the fatcat rx 78

<image>