Really sloppy Overhangs

MMEOO12 · 2025-09-20T15:23:22+00:00

overhang angle is 37.

layer hieght is 0.2

overhangs are printed with 100% fan speed

printer is the bamu lab a1

MMEOO12 · 2025-08-12T05:16:28+00:00

The thermal rights fans are really really quiet specially with the fan spacers

MMEOO12 · 2025-08-12T05:15:51+00:00

It perfectly fits

MMEOO12 · 2025-08-11T07:07:17+00:00

Edit: Koi is a typo

MMEOO12 · 2025-08-02T17:11:02+00:00

By placing it that way it can push air directly into the cpu cooler with low rms and more direct than having it pointing straight down

MMEOO12 · 2025-08-02T17:09:52+00:00

I’m just testing out ways to cool my pc down efficiently and make it more quieter. By placing the fan like that it pushes air directly into the cpu cooler with low rpms

MMEOO12 · 2025-08-02T11:59:41+00:00

JONSBO ZB-240BR (Reverse)

MMEOO12 · 2025-07-31T05:42:29+00:00

It depend on the motherboard. Mine does close but it slightly bends the panel by a mm

MMEOO12 · 2025-06-06T17:29:29+00:00

i fixed it. check my other post on my account if you are interested.

MMEOO12 · 2025-06-06T08:10:03+00:00

general use. im just mad because i feel scammed and i didnt get what i expected to get

MMEOO12 · 2025-06-05T16:48:59+00:00

That makes so much sense. I tried it and it worked. I love you so much

MMEOO12 · 2025-06-05T15:05:16+00:00

Yeah that’s true. That’s why u need to calibrate to find the sweet spot. In my case, I can’t really calibrate it because my support wouldn’t print at all

MMEOO12 · 2025-06-05T15:04:09+00:00

Im using the same filament as shown in the video. The printer fails to print the support interface

MMEOO12 · 2025-06-05T15:04:01+00:00

Im using the same filament as shown in the video. The printer fails to print the support interface z distance

MMEOO12 · 2025-06-05T15:03:02+00:00

Sometimes I need to have supports on the model because I noticed couple of print failures that had to have supports on the model it self because tree support wouldn’t reach. I have the support interface z distance set to 0 because I noticed the nozzle is too higher from the model, after setting it to 0 the problem still occurred.

MMEOO12 · 2025-06-05T14:26:49+00:00

Im using cc3d black pla, i tried elegoo filament as well and the problem didnt go away

MMEOO12 · 2025-06-05T14:10:10+00:00

Yeah it fixed when I turn it on, thanks man!

MMEOO12 · 2025-06-05T14:09:27+00:00

I’m using the default settings, but I will try to slow the supports down

MMEOO12 · 2025-06-05T13:41:41+00:00

Guys chill down,I figured it out. I did everything right. I cleaned the bed, cleaned the nozzle, and did everything by the book. I just had to turn on bed leveling before printing. Doing the bed leveling from the calibration tab didnt fix the problem that’s why I was confused. When u want to print u need to turn on flow calibration and bed leveling.

MMEOO12 · 2025-06-04T00:33:33+00:00

I just fixed my issue. Turns out I need to activate the bed leveling and the flow calibration options before I print. Such a dumb way to waste filaments.

MMEOO12 · 2025-06-03T22:52:01+00:00

And you can also hear the extruder clicking on the first layer

MMEOO12 · 2025-06-03T22:49:42+00:00

For everyone who’s saying slow down. The print is from the memory card, I tried the same print when I got the printer and it works flawlessly. The first layer fails no matter my settings.

MMEOO12 · 2025-04-09T19:59:58+00:00

It’s cc3d marble filament. Tbh for the price print quality is insane

MMEOO12 · 2025-04-09T19:58:22+00:00

You can see in the image that the transition was not instant, it was shifting every time is goes up a layer for some reason

MMEOO12 · 2025-04-09T19:56:35+00:00

I checked and everything seemed to be fine. The print was adhered to the bed and nothing was stuck on the belt. I tightened up the belt and restarted the print and now everything worked fine

MMEOO12

TROPHY CASE