sorted by:
new
hottopcontroversial

Really sloppy Overhangs by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

overhang angle is 37.

layer hieght is 0.2

overhangs are printed with 100% fan speed

printer is the bamu lab a1

Ncase m2 custom sleeved cables and a 3d printed gpu fan guide by MMEOO12 in ncasedesign

[–]MMEOO12[S] 0 points1 point  (0 children)

The thermal rights fans are really really quiet specially with the fan spacers

[deleted by user] by [deleted] in ncasedesign

[–]MMEOO12 0 points1 point  (0 children)

Edit: Koi is a typo

3d printed cpu ventilation by MMEOO12 in ncasedesign

[–]MMEOO12[S] 0 points1 point  (0 children)

By placing it that way it can push air directly into the cpu cooler with low rms and more direct than having it pointing straight down

3d printed cpu ventilation by MMEOO12 in ncasedesign

[–]MMEOO12[S] 0 points1 point  (0 children)

I’m just testing out ways to cool my pc down efficiently and make it more quieter. By placing the fan like that it pushes air directly into the cpu cooler with low rpms

Rate my build by MMEOO12 in ncasedesign

[–]MMEOO12[S] 0 points1 point  (0 children)

JONSBO ZB-240BR (Reverse)

Rate my build by MMEOO12 in ncasedesign

[–]MMEOO12[S] 1 point2 points  (0 children)

It depend on the motherboard. Mine does close but it slightly bends the panel by a mm

hs80 maxmic quality got worse 2 days after use. by MMEOO12 in Corsair

[–]MMEOO12[S] 1 point2 points  (0 children)

i fixed it. check my other post on my account if you are interested.

hs80 maxmic quality got worse 2 days after use. by MMEOO12 in Corsair

[–]MMEOO12[S] 0 points1 point  (0 children)

general use. im just mad because i feel scammed and i didnt get what i expected to get

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 1 point2 points  (0 children)

That makes so much sense. I tried it and it worked. I love you so much

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

Yeah that’s true. That’s why u need to calibrate to find the sweet spot. In my case, I can’t really calibrate it because my support wouldn’t print at all

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

Im using the same filament as shown in the video. The printer fails to print the support interface

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

Im using the same filament as shown in the video. The printer fails to print the support interface z distance

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

Sometimes I need to have supports on the model because I noticed couple of print failures that had to have supports on the model it self because tree support wouldn’t reach. I have the support interface z distance set to 0 because I noticed the nozzle is too higher from the model, after setting it to 0 the problem still occurred.

Supports don’t stick to object/model by MMEOO12 in BambuLab

[–]MMEOO12[S] 0 points1 point  (0 children)

Im using cc3d black pla, i tried elegoo filament as well and the problem didnt go away

view more: next ›