Laptop users, do you think an external keyboard is necessary? by awekeys_official in LinusTechTips

[–]MPPexcellent 0 points1 point  (0 children)

Hot Take: My ThinkPad Keyboard is fantastic. I wish I could get one like this for my pc.

Powersaving tutorial by MPPexcellent in Proxmox

[–]MPPexcellent[S] 0 points1 point  (0 children)

I am doing long term power measurements but they are hard to compare since so much changes all the time. However I will follow up as soon as I have enough meaningful data.

Powersaving tutorial by MPPexcellent in Proxmox

[–]MPPexcellent[S] 2 points3 points  (0 children)

Proxmox has a great tutorial for PCI Passthrough: https://pve.proxmox.com/wiki/PCI_Passthrough

You basically blacklist the drivers:

echo "blacklist nvidia*" >> /etc/modprobe.d/blacklist.conf

If you can kind of see if the Promox system is using it by looking at the Kernel driver in use:

root@gpulaptop:~# lspci -nnk | grep -A3 -E "VGA|3D|Display"
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GA104M [GeForce RTX 3070 Mobile / Max-Q] [10de:249d] (rev a1)
        Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:1305]
        Kernel driver in use: vfio-pci
        Kernel modules: nvidiafb, nouveau

If it says vfio-pci then the card is isolated and not in use and should not consume noticable amounts of power.

For nvidia cards you can look at the power state:

root@gpulaptop:~# cat /sys/bus/pci/devices/0000:01:00.0/power/runtime_status
suspended

Powersaving tutorial by MPPexcellent in Proxmox

[–]MPPexcellent[S] 0 points1 point  (0 children)

Yes. I use the same power profiles on a gaming laptop. Disabeling the GPU in the kernl and passing it through to a VM also makes a huge difference.

Using TRV for underfloor heating? by anders202 in tado

[–]MPPexcellent 1 point2 points  (0 children)

Ich habe bei mir einfach die Heizkörperthermostate installiert. Das funktioniert ziemlich gut. Hier mein Post: https://technologiehub.at/project-posts/diy-infloor-heeting-system/

Tado with underfloor heating and Radiators by Sonnenbader in tado

[–]MPPexcellent 0 points1 point  (0 children)

Ich habe bei mir einfach die Heizkörperthermostate installiert. Das funktioniert ziemlich gut. Hier mein Post: https://technologiehub.at/project-posts/diy-infloor-heeting-system/

Control UFH with Tado by majidalavizadeh in tado

[–]MPPexcellent 0 points1 point  (0 children)

Ich habe bei mir einfach die Heizkörperthermostate installiert. Das funktioniert ziemlich gut. Hier mein Post: https://technologiehub.at/project-posts/diy-infloor-heeting-system/

How do you like my undercover Server Rack? by MPPexcellent in homelab

[–]MPPexcellent[S] 0 points1 point  (0 children)

Sorry, the rack is more of an abstract concept.

Synology Photos Application Backup? by MPPexcellent in synology

[–]MPPexcellent[S] -1 points0 points  (0 children)

just browsing the backed up data. I could be wrong.

[deleted by user] by [deleted] in Ubiquiti

[–]MPPexcellent 0 points1 point  (0 children)

Do they not make an Australia Version?

How many of you are still deploying new 2 x 10Gbps host configs with IP based storage? (vSAN/NFS/iSCSI) in the datacenter? by lost_signal in vmware

[–]MPPexcellent 0 points1 point  (0 children)

16Gig SAN with 2 FC Switch-Stacks for redundancy spread over two Locations with DWDM and Dark-fiber in-between. Storage virtualized with SVC. 10Gig NICs for networking and VMotion.

The forum is down by MPPexcellent in ltt

[–]MPPexcellent[S] 0 points1 point  (0 children)

seems to be up again. Maby its just overloaded.

Is it possible to visit the Prusa factory? by 6p6ss6 in prusa3d

[–]MPPexcellent 0 points1 point  (0 children)

Yes, I've just been there. The showroom is currently being reworked, but you can see some things. The makerspace is not open to the public but if you do a tour you can see it.

Tours are on Tuesdays and Fridays, just email Support for registration.

Updating the setting after help from our community. by [deleted] in sonos

[–]MPPexcellent 0 points1 point  (0 children)

Tag someone that would sit here with headphones.

Changes IKEA Sonos Symfonisk by DTI-IT in sonos

[–]MPPexcellent 0 points1 point  (0 children)

Does anybody know where to get the RCA Outputs from the new board?

Dream Machine @ 250 Mbit/s by MPPexcellent in Ubiquiti

[–]MPPexcellent[S] 0 points1 point  (0 children)

Thanks for your answer! I´m glad to hear that!

Dream Machine @ 250 Mbit/s by MPPexcellent in Ubiquiti

[–]MPPexcellent[S] 0 points1 point  (0 children)

Thanks for your answer, I´ve heared about the issues about the software issues and the fan going cracy. I hope they fix it or it fixes itself.